Parts for Ge GTS18IBRBRBB: 05 - Fresh Food Shelves Parts

Left hand side. For right hand use WR17X10862

Right hand side. For left hand use WR17X10861

This front glass shelf trim replaces the finished edge piece that attaches to the front of a refrigerator glass shelf, restoring a clean look and helping keep items from sliding off the shelf. Fits one front edge trim. What it does

• Provides a finished front edge for a refrigerator glass shelf
• Helps stabilize the glass edge and reduce chipping or wear
• Restores appearance after cracking, chipping, or loss of the original trim
• Can prevent small items from sliding off the shelf front

• One front glass shelf trim

• Remove food and the glass shelf before attempting replacement
• Trim installs onto the front edge of the glass shelf; handle glass carefully to avoid damage
• Wear gloves and eye protection to prevent cuts from broken glass

A full-width cantilever shelf that restores stable, level storage inside the refrigerator. Replaces a bent or broken shelf to keep food organized and prevent items from sliding or falling. What it does:

• Supports refrigerator items on a full-width shelf, keeping contents level and secure
• Replaces damaged or bent cantilever shelving hardware that causes shelves to tilt or collapse
• Restores proper shelf alignment for even storage and safer handling
• Works with existing shelf tracks/brackets so the shelf locks into place

• Remove food and glass shelves from the area before installing
• Slide or snap the cantilever ends into the existing shelf tracks
• No special tools typically required; handle glass or edged surfaces with care

This full-width glass shelf cant provides a sturdy, level surface for refrigerator storage and restores proper shelf support and alignment. Replaces damaged or cracked cantilever glass to help keep items stable and organized. What it does:

• Supports refrigerator contents by providing a full-width glass shelf surface
• Restores proper shelf alignment when the original shelf is cracked, chipped, or sagging
• Prevents stored items from tipping or sliding due to uneven shelving
• Fits into existing shelf tracks to re-establish secure support

• Handle with care—glass can break; wear cut-resistant gloves and eye protection
• Remove food and any adjustable shelving above before replacing the shelf
• Install into existing shelf tracks; verify it seats fully and is level before loading
• If mounting hardware is damaged or missing, replace hardware before use

This half-width crisper drawer is used with the Hammer Head shelf design. It replaces a cracked or missing bin so you can organize produce and other fresh items and slide the drawer smoothly on the shelf rails.

• Holds produce and other items in the fresh-food compartment
• Slides on the side rails under the Hammer Head shelf to restore proper drawer operation
• Common symptoms: cracked or broken bin, won't slide/seat correctly, falls off rails, missing drawer
• Helps contain spills and keep items organized

• Empty the old drawer and pull it straight out; lift slightly to clear the stops
• Align the new pan with the rails and slide it in until fully seated—do not force
• Verify the shelf and rails are correctly positioned and level
• If removing shelves or working near lights or wiring, disconnect power for safety

This is a half-width cantilever shelf for the refrigerator's fresh food compartment. It mounts on the rear wall rails to create adjustable storage space and replace a cracked, sagging, or missing half shelf.

• Provides adjustable storage; hangs from rear wall tracks
• Replaces a shelf that is cracked, warped, unstable, or missing
• Helps restore proper organization and usable space
• Maintains correct fit and support for refrigerated items

• Unplug the refrigerator and remove food from the area before starting
• Lift and slide the old shelf out of the wall rails; install the new shelf into the same slots
• Inspect wall rails and supports for damage before reuse
• Handle carefully to avoid chipping edges or scratching liners

Replacement cantilever half glass shelf that restores a flat, easy-to-clean storage surface inside the refrigerator. Provides a stable platform for containers and replaces a cracked, chipped, or missing shelf. What it does:

• Provides a flat, sturdy surface for storing food and containers on refrigerator shelving rails.
• Slides into existing cantilever shelf supports for quick replacement.
• Restores full usable shelf space after a broken or missing glass shelf.
• Helps contain small spills on a smooth, easy-to-clean surface.

• Remove all contents from the area before installing and place on a padded surface to avoid damage.
• Handle with care and wear cut-resistant gloves; glass edges may be sharp if broken.
• Slide the shelf into the existing side supports until fully seated; do not force if misaligned.
• Dispose of any broken glass safely and check that supporting rails or brackets are intact and secure.

This front glass shelf trim restores the finished front edge of a refrigerator glass shelf so items stay put and the shelf looks tidy. It replaces a cracked, chipped or missing front trim to help keep the glass seated and stable. What it does:

• Covers and secures the front edge of a refrigerator glass shelf for a finished appearance.
• Helps prevent items from sliding off the shelf and reduces exposure of the glass edge.
• Replace if the trim is cracked, broken, loose, or missing and allowing the glass to shift.
• Designed to snap or slide into the shelf channel and hold the glass front in place.

• Remove food and glass shelf before replacing trim; handle glass carefully to avoid breakage.
• Press the trim into the shelf channel until it seats; some models use clips — avoid forcing parts.
• If glass is damaged, replace the glass and trim together.

This rear glass shelf trim replaces the finished glass edge at the back of a refrigerator shelf, restoring a secure seat and clean appearance. It helps keep items from sliding off and reduces gaps where spills can drip. What it does:

• Provides the finished rear edge and support for a refrigerator glass shelf.
• Helps the shelf seat and lock into position; a broken or missing trim can prevent proper seating.
• Reduces food/items from shifting toward the cabinet rear and helps contain minor spills.
• Restores appearance when the original trim is cracked, chipped, or worn.

• Handle the glass trim carefully; wear cut-resistant gloves and eye protection during installation.
• Remove the shelf per the appliance's OEM instructions before replacing the trim, then refit the shelf and verify it seats properly.
• Inspect mounting clips or supports and replace if damaged to ensure a secure fit.

The Snack Pan Slide is an OEM part for GE refrigerators. This part provides a smooth track for the snack pan or deli drawer to slide in and out, ensuring easy access to stored items.

Causes of a bad snack pan slide can include regular wear and tear, damage from overloading the drawer, or breakage due to improper handling.  

Symptoms of a bad snack pan slide include:

• Difficulty opening or closing the snack pan
• The snack pan not sliding smoothly or getting stuck
• Visible cracks or damage to the slide
• The snack pan not staying aligned or securely in place

This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore models.

This left side snack pan slide is a genuine General Electric part, sold individually. This left side snack pan slide can be used as a replacement part for a refrigerator. This is the part on which the crisper drawer rests, and it facilitates the sliding in and out of the crisper drawer. The left side snack pan slide is made out of durable white plastic.The left side snack pan slide might have to be replaced at some point within the lifespan of a refrigerator if it is damaged to the point that it can no longer serve its function. This damage could take the form of cracks, punctures, or erosion to the plastic material as a result of general wear and tear or from a collision with a hard object that warps the component beyond functionality. If either of these things occur, the component should be removed and replaced with this genuine OEM replacement part.This is an OEM part sourced directly from the manufacturer. It is sold individually. This left side snack pan slide is compatible with the following appliance brands: General Electric and Kenmore.

8-18 CA HX 1/2 S