Parts for Ge PGCS1PJZCSS: 06 - Fresh Food Shelves Parts

The water filter is an OEM part for GE refrigerators. This filter removes or reduces various contaminants.

Features and Benefits:

• Easy DIY replacement, typically mounted inside the refrigerator at the back of the compartment.
• Removes or reduces various contaminants in your water and ice, including lead, cysts, asbestos, atrazine, , taste and odor, chlorine, sediment, turbidity, and more
• NSF/ANSI 42 and 53 standards
• 6 Month lifespan filter
• Carbon Block media
• Micron rating: 0.5-1 micron (Class I)

When to replace your filter:

• Bad taste or odor in water and ice
• Cloudy or discolored ice
• Reduced water flow or pressure
• Refrigerator replace filter indicator light is on

Note: If replacing the Culligan metal canister design filter for the first time, a special adapter, part number AP2615702 is needed, which is not included with this part. The compatible bypass cap is part number AP6891551.

This OEM GE part can also be used on Hotpoint, RCA, and Kenmore/Sears appliances. 
 

This slide and bracket assembly supports and guides a refrigerator shelf so it moves smoothly and stays level. Replaces worn or damaged slides to restore stable shelf operation and prevent sagging or sticking. What it does:

• Provides a guided track and mounting bracket for a refrigerator shelf to slide in and out
• Restores smooth shelf movement when the shelf sticks, binds, or falls out of alignment
• Keeps the shelf level and properly supported to prevent tipping or sagging under load
• Works where original slide hardware is cracked, bent, or worn

• Disconnect power to the appliance and remove stored items from the shelf area before starting
• Remove the old slide assembly and fasteners; preserve screws if they are undamaged and re-usable
• Use common hand tools (screwdriver, nut driver) and handle edges carefully to avoid cuts

This Slide & Bracket Assembly restores smooth drawer movement by replacing a worn or broken refrigerator drawer slide. It helps keep the drawer aligned and operating properly so food storage compartments open and close reliably. What it does:

• Replaces damaged or bent drawer slide and mounting bracket that cause sticking or uneven movement
• Restores smooth sliding action and proper drawer alignment
• Prevents drawers from dropping or coming off their track
• Addresses symptoms like a drawer that sticks, tilts, or won't stay level

• One slide and bracket assembly

• Disconnect power to the appliance before servicing to avoid injury
• Remove the drawer and any stops or clips to access mounting screws; basic hand tools are typically required
• Align the bracket and slide, secure all fasteners, then test drawer movement before returning contents

This vegetable pan cover forms the shelf directly above the crisper drawers, supporting food items and sealing the bins below. Replace a cracked or missing cover to restore stable storage and smooth, reliable drawer operation.

• Forms the shelf surface over the crisper/vegetable drawers
• Helps contain cold air within the drawer area for consistent cooling
• Supports items so they don't fall into the bins below
• Common symptoms: cracked or broken cover, unstable shelf, drawers misaligning or jamming

• Disconnect power to the refrigerator before service
• Remove food items and crisper drawers, then lift out the old cover
• Handle any glass components with cut-resistant gloves and support from below
• Seat the cover fully and level in its recess before reinstalling drawers

This replacement wheel slide restores smooth movement to a refrigerator drawer by guiding the drawer along its track and supporting its weight. It helps stop sticking, sagging, or grinding so drawers open and close reliably. What it does

• Guides and supports a refrigerator or freezer drawer along its track for smooth operation
• Replaces damaged, worn, or missing slides that cause sticking or uneven movement
• Helps stop drawers from sagging or coming off the track
• Works with the drawer roller system to reduce grinding and binding noises

• One wheel slide

• Disconnect power to the appliance or unplug before service to avoid electrical risk
• Remove the drawer and existing slide; installation typically requires basic hand tools and alignment on the track
• Inspect adjacent rollers and track for wear; replace if damaged for best performance
• Handle plastic parts carefully to avoid cracking; test drawer movement before returning items to the drawer

A flat head sheet metal screw used to fasten appliance panels and components where a flush finish is needed. Zinc plating helps resist corrosion and provides long-lasting secure attachment. What it does:

• Secures trim, panels, brackets or small components to sheet metal surfaces
• Flush countersunk head sits level with the surface for a clean fit
• Zinc finish resists rust in typical household environments
• Replaces stripped, missing or loose fasteners that cause rattling or misalignment

• Unplug or disconnect power to the appliance before servicing
• Use the correct sized Phillips driver or bit to avoid cam-out and head damage
• Do not overtighten; stop when the head is flush to prevent stripping or deforming the panel

This slide control is the user-operated slider that adjusts a front-panel setting, restoring smooth, reliable position selection and tactile feedback. It replaces worn or damaged sliders so controls respond predictably. What it does:

• Moves along a track to change a user control setting (e.g., temperature, speed or level) and provides a detented position feel
• Restores mechanical connection between the user knob/slider and the internal control mechanism
• Commonly replaces units that are stuck, loose, broken, or provide intermittent contact
• Helps eliminate slipping or poor tactile feedback when selecting settings

• One slide control assembly as shown

• Disconnect power to the appliance before starting any repair
• Most installs require removing the console or control panel; keep screws and small parts organized
• Handle plastic tabs and mounting features gently to avoid breakage
• Ensure secure mating and correct orientation before reassembly

This replacement front pan cover gasket seals the refrigerator evaporator/drip pan area to help control moisture and direct defrost water into the drain. Restores a proper seal to reduce leaks and moisture buildup under the pan. What it does:

• Seals the front edge of the evaporator/drip pan to prevent water from escaping the pan area
• Helps route defrost and condensation into the drain system to avoid pooling
• Reduces moisture accumulation that can cause odors or frozen drainage
• Commonly replaced when old gasket is cracked, hardened, or missing

• One front pan cover gasket

• Inspect surrounding pan and trim for damage before installing; replace any broken clips or retainers
• Clean mating surfaces and remove debris to ensure a full seal
• Gasket typically presses into a channel or secures with clips—no special tools required, but a flat tool can assist seating
• Disconnect power to the appliance before servicing to avoid electrical hazard

This replacement screw fastens appliance panels, brackets, and trim. The 8-18 thread with 1-3/4-inch length provides reliable bite in sheet metal or plastic, restoring a secure fit when an original fastener is missing or damaged.

• Secures panels, brackets, and trim to the cabinet or frame
• Replaces lost, stripped, or corroded fasteners
• Helps address loose or rattling panels, minor gaps, or misalignment
• Appropriate for sheet-metal applications that require ~1-3/4-inch reach

• Disconnect power before servicing; wear cut-resistant gloves
• Support the panel or part being fastened and use the correct driver for the screw head
• Start threads by hand to avoid cross-threading; do not overtighten into plastic or thin metal
• Repair or replace the anchor before installing

This is a replacement gasket for the refrigerator pan/vegetable drawer frame that helps restore a proper seal around the produce drawer to reduce air exchange and help maintain stored-food freshness. Fits the pan/frame channel for a direct OEM-style replacement. What it does:

• Seals the vegetable/crisper pan area to limit warm or moist air from entering the drawer
• Helps reduce excess condensation and premature spoilage of produce
• Restores proper drawer fit and alignment when the original gasket is worn or damaged
• Can stop minor air leaks around the pan frame that contribute to uneven cooling

• One replacement gasket for the pan/vegetable frame

• Remove the drawer and any clips or screws securing the frame before replacing the gasket
• Clean the mating channel of debris and old adhesive/sealant before installing the new gasket
• Press the gasket evenly into the frame channel; work around the perimeter to ensure a full seat
• Unplug the refrigerator or turn off power before starting

This damper is the refrigerator air-flow control that opens and closes to direct cold air between compartments, helping maintain proper cooling balance. Replaces a worn or stuck damper to restore regulated airflow and more consistent temperatures. What it does:

• Controls the amount of cold air moved from the freezer into the refrigerator compartment.
• Opens and closes based on the fridge's temperature control signals to balance compartment temperatures.
• A faulty damper can cause uneven cooling, a warm fresh food section, or overcooling in one compartment.
• Works with the existing housing and linkage to modulate airflow as commanded by the control board.

• One damper assembly

• Disconnect power to the appliance before starting any repair to avoid electric shock.
• Remove interior panels or shelves as needed to access the damper; keep fasteners for reassembly.
• Handle plastic components gently to avoid cracking; test damper operation after reassembly.

This damper assembly controls airflow between refrigerator compartments to help maintain even temperatures. It replaces a worn or stuck damper to restore proper cold-air balance and improve cooling performance. What it does:

• Opens and closes to regulate cold-air flow from the freezer to the fresh-food section
• Can restore airflow when the refrigerator is warmer than the freezer or compartments are unevenly cooled
• Helps correct symptoms such as poor cooling, fluctuating temperatures, or a freezer that's much colder than the fridge
• Works with the refrigerator's temperature controls to maintain set temperatures

• One damper assembly

• Disconnect power to the appliance before starting any repair
• Locate the damper in the fresh-food section near the top or the freezer-to-fridge air duct; remove shelves or covers as needed for access
• Handle the actuator and linkage gently; ensure correct orientation and secure mounting when installing
• After installation, reconnect power and allow the refrigerator several hours to stabilize; verify airflow and temperature operation

A replacement cantilever glass shelf that provides a sturdy, flat surface for storing food and containers in your refrigerator. Restores usable shelving space and helps keep items organized and visible. What it does:

• Replaces a cracked, chipped or missing glass shelf to safely support food and containers
• Fits into existing cantilever support rails and allows height adjustment on standard notches
• Provides a smooth, easy-to-clean surface that resists spills and stains
• Helps maintain proper airflow and organization inside refrigerator compartments

• One cantilever glass shelf

• Disconnect power or unplug the refrigerator before service to avoid injury
• Remove food and any loose items from the area before removing the old shelf
• Support the shelf when sliding it out of the rails to avoid dropping or breakage; lift slightly to free from brackets
• Handle glass edges carefully and dispose of broken glass per local regulations

This inlet meat pan gasket seals the meat pan/deli drawer area to help maintain proper compartment airflow and reduce moisture and odors. It restores a tighter seal for more consistent internal temperatures and fresh storage. What it does:

• Replaces a worn or torn inlet gasket that lets air leak around the meat/deli pan
• Helps reduce moisture buildup and frost near the drawer area
• Can improve temperature consistency inside the deli/meat compartment
• Reduces food odors caused by gaps in the seal

• One inlet meat pan gasket

• Disconnect power to the appliance before starting any repair
• Remove the drawer/pan to access and clean the gasket seating area prior to install
• Press the gasket fully into its channel, ensuring an even, continuous seal around the opening
• Inspect for proper fit and reassemble drawer; check drawer operation and seal after reinstall

This vegetable pan support assembly holds and guides the crisper/vegetable drawer so it opens smoothly and keeps the cover/shelf above level. Replace a damaged support to restore proper drawer alignment and prevent sagging or sticking. What it does:

• Supports the crisper/vegetable drawer and the cover/shelf it rides on
• Maintains level alignment to reduce binding, scraping, or tipping
• Provides a stable track point for smooth drawer movement
• Common symptoms: drawer tilts, binds, or falls; shelf sags; visible cracks or broken tabs on the support

• 1 vegetable pan support assembly

• Unplug the refrigerator before servicing
• Remove the crisper drawer and cover/shelf to access the support
• Match the new support's orientation to the original; transfer any reusable hardware if applicable
• Seat the support fully and securely before reinstalling the cover/shelf and drawer; test drawer travel

This right-side drawer/door guide helps support and guide a refrigerator drawer or door for smooth, stable movement. Replace a worn or damaged side track to restore proper alignment and reduce binding or slipping. What it does:

• Guides and supports the drawer/door along the cabinet frame to enable even, controlled travel
• Prevents the drawer or door from dropping, catching, or moving unevenly
• Reduces rubbing and grinding noises caused by worn or bent tracks
• Restores alignment when the drawer or door feels loose or misaligned

• Disconnect power to the appliance and remove stored items before starting work
• Installation commonly requires basic hand tools; handle edges carefully to avoid damage
• Verify right-side orientation before installing; do not force parts into place
• Replace with OEM-specified fasteners

This front-right vegetable pan is the replacement crisper bin that holds fresh produce and fits into the refrigerator's lower drawer area to keep fruits and vegetables organized and contained. Durable plastic construction restores storage function. What it does:

• Replaces a cracked, chipped, or missing front-right crisper/vegetable pan
• Provides a stable bin to store fruits and vegetables and prevent items from spilling onto lower shelves
• Helps keep the drawer area tidy and supports the crisping drawer assembly
• Restores proper fit and sliding alignment when the original pan no longer seats correctly

• One front-right vegetable/crisper pan

• Remove produce and the crisper drawer assembly before installing to avoid damage
• Slide the pan into the existing tracks or snap it into place, ensuring it seats flush with adjacent parts
• If the assembly resists, check for obstructions or damaged rails before forcing the pan
• Wear gloves to avoid sharp edges on damaged parts and unplug appliance or disable controls per manufacturer guidance when working near electrical components

This divider pan separates and supports crisper drawers to help keep produce organized and contained. It restores the original divider function so drawers slide and seal correctly, reducing shifts and spills inside the refrigerator. What it does

• Replaces a broken or missing divider that separates crisper drawers or pans
• Helps keep fruits and vegetables organized and contained to prevent mixing
• Supports proper drawer alignment and reduces unwanted movement or rattling
• Can stop small spills from spreading across the crisper area

• One divider pan

• Removal/installation is user-serviceable on most units; remove produce and gently lift or slide the old divider out before fitting the replacement
• Inspect surrounding rails and clips for damage; replace if worn to ensure proper fit
• Use gloves to avoid sharp sheet-metal edges and keep components clean during install

This cover flip lid assembly replaces a worn or damaged ice maker/ice bin lid to keep stored ice covered and help prevent spills and contamination. It restores the lid function so the ice bin opens and closes smoothly. What it does:

• Covers the ice storage area to keep ice cleaner and reduce exposure to odors
• Provides a hinged lid that flips open for easy access to ice
• Helps prevent ice from spilling when removing the bin
• Restores proper lid alignment and operation when the old lid is cracked or broken

• Disconnect power to the appliance before beginning any work.
• Remove the ice bin and any obstructions to access the lid assembly.
• Align the hinge and snap or secure the lid into place using existing fasteners; do not force parts.
• Reinstall the ice bin, restore power, and verify the lid opens and closes smoothly.

This refrigerator pan/vegetable frame gasket seals the crisper area to help maintain proper humidity and keep produce fresher. It replaces a torn, loose, or hardened gasket to restore the drawer seal. What it does:

• Seals the crisper/pan opening to help retain humidity for stored fruits and vegetables
• Helps prevent cold air loss and reduces temperature fluctuation in the drawer area
• Commonly replaced when the gasket is cracked, warped, flattened, or detached
• Fits around the vegetable/crisper pan frame to restore an effective seal

• Disconnect power or unplug the appliance before starting work
• Remove crisper drawer/pan to access the gasket area
• Press the gasket into the channel around the pan/frame; avoid overstretching
• Do not use sharp tools that could nick the gasket or surrounding trim