Parts for Ge ZISB360DXA: 08 - Fresh Food Shelves Parts

The water filter is an OEM part for GE refrigerators. This filter removes or reduces various contaminants.

Features and Benefits:

• Easy DIY replacement, typically mounted inside the refrigerator at the back of the compartment.
• Removes or reduces various contaminants in your water and ice, including lead, cysts, asbestos, atrazine, , taste and odor, chlorine, sediment, turbidity, and more
• NSF/ANSI 42 and 53 standards
• 6 Month lifespan filter
• Carbon Block media
• Micron rating: 0.5-1 micron (Class I)

When to replace your filter:

• Bad taste or odor in water and ice
• Cloudy or discolored ice
• Reduced water flow or pressure
• Refrigerator replace filter indicator light is on

Note: If replacing the Culligan metal canister design filter for the first time, a special adapter, part number AP2615702 is needed, which is not included with this part. The compatible bypass cap is part number AP6891551.

This OEM GE part can also be used on Hotpoint, RCA, and Kenmore/Sears appliances. 
 

This snack pan assembly replaces the factory snack pan to restore shelf storage and organization in the refrigerator. It provides a stable tray for small items and helps keep foods separated and accessible. What it does:

• Replaces a cracked, warped or missing snack pan to restore usable shelf space
• Supports lightweight food items, snack packs and deli containers
• Helps prevent spills from spreading to lower shelves
• Fits into the refrigerator snack/pantry area to maintain orderly storage

• Install by sliding the pan into the existing refrigerator rail slots until seated
• No special tools required for most installs; handle carefully to avoid chipping or cracking the plastic during installation
• Disconnect power only if service requires removing interior panels near electrical components

This front basket is the freezer door bin that holds and organizes frozen items on the door. It restores storage space and helps prevent items from shifting or falling when the door opens. What it does:

• Provides a secure shelf on the freezer door for packaged foods and small containers
• Keeps frozen items organized and easily accessible
• Prevents items from falling out when opening or closing the freezer door
• Replaces cracked, broken, or missing door bins that no longer hold items

• One front basket assembly

• Disconnect power to the appliance before attempting service
• Remove all items from the door and lift or unclip the old bin per the appliance guide
• Inspect mounting rails or supports for damage and replace if necessary
• Handle plastic components carefully to avoid cracking during installation

This wire support holds the refrigerator veg/crisper pan in place so drawers stay level and slide smoothly. It replaces a bent, broken or missing support to restore proper pan alignment and storage stability. What it does

• Provides a stable mount for the veg/crisper pan so drawers sit and slide correctly
• Prevents the pan from sagging or tilting under load
• Helps stop binding or rubbing that can occur when a support is damaged
• Commonly replaced when the support is bent, cracked or missing

• One veg/crisper pan wire support

• High-level replacement: remove the drawer and lift the pan to access the support; reinstall in the same location
• Use gentle pressure to seat the support into its mounts; do not force or bend the part
• Unplug the appliance or disconnect power at the breaker before working near electrical components
• Wear gloves to protect hands from sharp sheet-metal edges

This right-hand pan side support secures the refrigerator drain/drip pan, helping keep the pan aligned and stable to prevent sagging or movement that can lead to noise or water pooling under the appliance. What it does:

• Holds the drain/drip pan in the correct position at the right side of the cabinet
• Prevents pan sagging that can cause vibration or rubbing noises
• Helps maintain proper pan alignment to reduce the chance of water spills or pooling
• Replaces worn, cracked or broken side supports that no longer secure the pan

• Disconnect power to the appliance before beginning any repair
• Access may require removing the kickplate/grille and/or sliding out the pan
• Handle plastic parts carefully to avoid cracking; confirm correct side (right-hand) before installation
• If fasteners are stripped or damaged, replace them with OEM-recommended hardware

This left-side pan support secures and aligns the refrigerator pan/drawer, restoring stable, level support for smooth drawer movement and proper pan positioning. It's a simple replacement that prevents sagging or misalignment. What it does:

• Supports the refrigerator pan or deli drawer on the left side to keep it level and stable
• Holds the pan in place so drawers slide smoothly and don't catch or tilt
• Failsafe for preventing pan sagging or partial drops when the original clip breaks
• Helps maintain proper airflow and drawer operation by keeping components aligned

• Disconnect power to the appliance before servicing to reduce shock risk
• Remove the pan/drawer per your model's diagram to access the support
• Replacement typically snaps or screws into the same bracket location — align tabs and press firmly until seated
• Inspect adjacent supports and mounting clips; replace any damaged pieces to ensure proper fit

This outer drawer slide supports and guides a refrigerator drawer or pantry pan so it opens and closes smoothly. Replacing a worn or cracked slide restores alignment and helps prevent sticking, tipping, or spills.

• Attaches as the outer rail for the sliding drawer assembly
• Provides smooth gliding action and supports the drawer/pan
• Helps keep the drawer level and properly aligned
• Common symptoms: drawer hard to move, tilts or falls, cracked/broken rail, scraping or binding

• Disconnect power; empty and remove the affected drawer
• Remove the shelf/cover if needed to access the slide
• Take out mounting screws/clips; note the slide's orientation
• Install the new slide, ensure rails are parallel, and test drawer travel