Parts for Ge DFE29JGDDBB: Fresh Food Shelves Parts

Filter Material: Carbon Block. Micron Rating: 0.5. Flow Rate: 0.5 gpm. Operating Pressure: 120 psi. Approximate dimensions: 10" x 1-3/4"

The GE Refrigerator Water Filter RPWFE is an OEM part for GE refrigerators. This advanced water filter is crucial for removing contaminants and impurities from your refrigerator's water supply, ensuring you have access to clean, fresh-tasting drinking water and ice. Utilizing a state-of-the-art filtration process, the RPWFE filter is capable of reducing various contaminants, including lead, chlorine, and five pharmaceuticals, providing peace of mind about the quality of your water.

Over time, water filters can become clogged with particles and contaminants, leading to a decrease in water flow and a reduction in the effectiveness of filtration. It's important to replace your refrigerator water filter as recommended by the manufacturer, typically every six months, to ensure optimal performance and maintain the quality of your water.

Symptoms of a filter needing replacement include:

• Reduced water flow from the dispenser.
• Unpleasant taste or odor in the water or ice. 
• The refrigerator's water filter indicator light turns on

This OEM GE part can also be used on Hotpoint, RCA, and Kenmore/Sears appliances. 

This SCR is a solid-state switching module that controls on/off power flow in select appliance circuits. Replacing a failed SCR helps stop intermittent operation and restores reliable switching for affected motors or heating elements. What it does:

• Regulates electrical switching in the control circuit to turn motors or heaters on and off.
• Used where a solid-state switch is required for smooth, repeatable control.
• Symptoms of a failing SCR: appliance won't start, runs intermittently, hums without operating, or a controlled circuit does not respond.
• Restores proper switching when the original SCR is shorted, open, or erratic.

• Disconnect power to the appliance before beginning service; follow lockout/tagout procedures.
• Handle as an electronic component—avoid static discharge and protect the spade terminals from bending or contamination.
• Ensure correct orientation and secure mounting; reconnect wiring exactly as shown on the appliance wiring diagram.

A #8-18 x 9/16-inch hex washer head screw used to secure panels and components in appliances. Provides a proper fit for fast, reliable fastening when replacing missing, damaged, or stripped screws. What it does:

• Secures panels, brackets, and trim to keep components aligned and stable.
• Restores proper fastening when threads are stripped, the original screw is missing, or a head is damaged.
• Helps stop rattling or loose parts caused by worn or broken fasteners.
• Fits applications requiring a #8-18 thread with a 9/16" length and hex washer head style.

• Verify thread size, head style, and length before installation.
• Use the correct hex driver or socket to avoid cam-out or head damage.
• Do not overtighten; snug until secure to avoid stripping threads or deforming parts.
• Disconnect power and follow appliance-specific safety steps.

8-18 CA HX 1/2 S

This left-side vegetable pan is the replacement food-storage tray that holds produce and fits into the refrigerator crisper area for organized storage. It restores proper support and containment for fruits and vegetables. What it does:

• Provides a stable tray for storing fruits and vegetables in the crisper compartment
• Replaces cracked, warped, or broken pans that can let produce sit unevenly or fall through
• Helps keep items contained and easier to organize when the drawer is removed
• Works with the refrigerator's crisper assembly to maintain normal storage function

• One left-side vegetable pan

• Remove food and any loose components before installing to avoid damage or injury
• Slide the pan into the left crisper slot until it seats; ensure proper alignment with drawer rails
• Handle glass or plastic panels carefully to avoid chips or cracks

This right-hand vegetable pan assembly replaces a cracked or damaged crisper pan so produce stays supported and drawers slide smoothly. It restores the refrigerator's storage area for fruits and vegetables. What it does:

• Supports and contains produce in the right-side crisper area to prevent items from falling into lower compartments.
• Provides a flat, stable surface so the associated drawer slides and seats correctly.
• Stops leaks or pooling caused by cracks or breaks in the original pan.
• Helps eliminate drawer binding or uneven alignment when the pan is damaged.

• Remove food and the crisper drawer before replacing the pan; reinstall drawer carefully to ensure proper seating.
• No special tools typically required; slide or snap the pan into the existing tracks per the fridge's hardware layout.
• Inspect surrounding rails and stops for damage; replace any broken hardware before installing the new pan.
• Handle edges carefully and recycle the old part according to local regulations.

The Slide Assembly Meat Pan is an OEM replacement part for GE refrigerators. It is a specialized pan designed to slide smoothly in and out of the refrigerator compartment on the accompanying rack or slide assembly. This meat pan is ideal for storing and organizing meats, poultry, or other items, allowing for easy access and visibility within the refrigerator.

Symptoms of a bad Slide Assembly Meat Pan can include:

• Difficulty sliding the pan in and out of the refrigerator
• Wobbling or instability of the pan on the rack
• Cracks, dents, or discoloration on the pan's surface
• Leaks or spills due to warping or damage

Causes of a bad refrigerator meat pan can include warping due to temperature changes, scratches or dents from mishandling, or general wear and tear over time. A damaged or worn-out meat pan can affect the stability and smooth sliding motion within the refrigerator, potentially causing spills or disorganization.

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore refrigerator models.

This MP back cover assembly protects the appliance's rear components and wiring, helping keep parts shielded and contained while the unit is in use. It's a direct-replacement style cover for the back of the MP area. What it does:

• Shields internal components and wiring from dust, debris and incidental contact
• Maintains proper enclosure for components to reduce rattling or movement
• Helps preserve airflow routing and component placement behind the MP area
• Visible damage, missing fasteners, or exposed wiring at the rear are common symptoms that this cover needs replacement

• Disconnect power to the appliance before starting any service work
• Use proper tools for removing and reinstalling fasteners; keep track of screws and clips
• Handle edges carefully — cover edges and mounting points can be sharp

This gasket seals the meat pan to help contain juices and maintain proper cooling inside the refrigerator drawer. It replaces a worn or torn seal to reduce leaks and help the pan sit securely. What it does:

• Provides a snug seal around the meat pan to help contain drips and spills
• Helps maintain a consistent drawer environment by limiting air exchange
• Reduces odors and moisture transfer from the meat pan to the cabinet
• Commonly replaced when cracked, deformed, or no longer sealing properly

• Inspect the pan and surrounding channel for damage or debris before installing
• Remove the old gasket and clean the mounting surface to ensure a proper seal
• Press the new gasket into place evenly around the pan; some warming of the gasket can aid flexibility

This replacement lever restores a worn or broken control surface so the dispenser or interior mechanism operates smoothly. It fits into the original pivot and offers a quick, affordable way to regain normal function. What it does:

• Acts as the pivoting control that engages the dispenser or internal latch
• Replaces cracked, bent or worn levers that prevent proper operation
• Helps stop sticking, loose movement, or failure to engage when pressed
• Restores reliable feel and alignment for normal user operation

• Disconnect power (unplug or switch off breaker) before starting any repair
• Remove access panels or trim carefully; keep fasteners for reassembly
• May require a screwdriver or nut driver to remove retained clips or screws

A replacement round control knob that restores safe, reliable control of cooktop or oven functions. Fits standard push-on valve/stem designs to replace cracked, loose, or missing knobs and make setting temperatures intuitive again. What it does:

• Replaces a worn, cracked, stripped, or missing control knob so you can accurately set heat and function
• Push-on design engages the range/oven control stem for smooth rotation and selection
• Improves user safety and usability by restoring a secure grip and clear pointer alignment
• Works for common push-on valve/stem applications on ranges and ovens

• One replacement control knob

• Disconnect power (or turn gas off) and allow appliance to cool before replacing knobs
• Pull off the old knob straight from the control stem and push the new knob fully onto the stem until it seats
• Inspect the control stem for damage; do not force a knob onto a broken or bent stem

This center track guides and supports the fresh-food door drawer, helping the drawer slide smoothly and stay aligned for reliable access and seal. Replaces a worn or damaged center track to restore normal movement and alignment. What it does:

• Provides a stable sliding surface for the fresh-food drawer/door
• Restores smooth opening and closing when original track is worn or cracked
• Helps maintain proper door alignment to reduce gaps that can affect cooling
• Common symptom: drawer sticks, jams, or tilts during operation

• One center track for the fresh-food drawer/door

• Turn off power to the appliance before beginning any service
• Access usually requires removing the drawer/door assembly and fasteners; keep hardware organized
• Inspect companion tracks and rollers; replace any worn pieces to ensure smooth operation

This roller assembly helps refrigerator drawers and baskets glide smoothly along their tracks. When the wheel or bracket wears or breaks, drawers can stick, scrape, or sit unevenly—replacing the roller restores easy, consistent movement.

• Supports and guides a drawer or basket on its track
• Restores smooth in-and-out sliding action
• Replaces a cracked, worn, or missing wheel/bracket
• Common symptoms: drawer hard to open/close, scraping noise, drawer tilts or drops

• Disconnect power and remove the affected drawer/shelf to access the roller
• Note orientation; remove retaining screw or clip and detach the old roller
• Position and secure the new roller—avoid overtightening into plastic
• Reinstall and test the drawer; clean the tracks and check for damage or misalignment

This guide roller is the replacement wheel that supports and guides the refrigerator vegetable/crisper pan, helping the drawer slide properly and stay aligned for reliable access. Designed to restore smooth, stable drawer movement. What it does:

• Supports the vegetable/crisper pan and rides in the drawer track to keep the drawer aligned.
• Reduces binding or catching when opening and closing the drawer.
• Replaces worn or broken rollers that cause the drawer to tilt, jam, or make scraping noises.
• Helps maintain even weight distribution so the drawer opens and closes reliably.

• Disconnect power to the refrigerator before beginning any repair.
• Remove the vegetable/crisper pan/drawer to access the roller and replace the old roller with the new one.
• Use basic hand tools as required; follow OEM instructions for reassembly.

This damper controls airflow to the refrigerator vegetable/produce pan to help maintain proper humidity and cooling for fresh food. Replacing a worn damper restores balanced airflow and helps keep produce crisper. What it does:

• Opens and closes the vent to regulate cold air entering the vegetable/produce pan
• Helps maintain proper humidity and temperature in the crisper area
• Commonly used when produce becomes wilty or the fresh-food compartment cools unevenly
• Prevents overcooling or insufficient airflow to the crisper drawer

• Disconnect power to the appliance before attempting repair
• Remove shelves/drawers as needed for access; handle glass shelves carefully
• Verify damper orientation and secure mounting before reassembly

This bar reinforcement is a replacement support brace that restores strength and alignment to the appliance trim or door assembly. It helps secure panels and prevents sagging or flexing for reliable everyday use. What it does:

• Provides structural support for the door or trim assembly to reduce flex and maintain alignment
• Restores a loose or sagging panel to proper position
• Helps keep connected components stable during normal operation
• Designed to fit into the original mounting points and distribute load where the factory part did

• Follow the appliance manufacturer's service manual for disassembly and reassembly steps
• Use appropriate hand tools; avoid overtightening fasteners to prevent damage
• Disconnect power (or gas, if applicable) and remove food/contents from working area before starting