Parts for Ge GYE22KSHCSS: Fresh Food Shelves Parts

Filter Material: Carbon Block. Micron Rating: 0.5. Flow Rate: 0.5 gpm. Operating Pressure: 120 psi. Approximate dimensions: 10" x 1-3/4"

The GE Refrigerator Water Filter RPWFE is an OEM part for GE refrigerators. This advanced water filter is crucial for removing contaminants and impurities from your refrigerator's water supply, ensuring you have access to clean, fresh-tasting drinking water and ice. Utilizing a state-of-the-art filtration process, the RPWFE filter is capable of reducing various contaminants, including lead, chlorine, and five pharmaceuticals, providing peace of mind about the quality of your water.

Over time, water filters can become clogged with particles and contaminants, leading to a decrease in water flow and a reduction in the effectiveness of filtration. It's important to replace your refrigerator water filter as recommended by the manufacturer, typically every six months, to ensure optimal performance and maintain the quality of your water.

Symptoms of a filter needing replacement include:

• Reduced water flow from the dispenser.
• Unpleasant taste or odor in the water or ice. 
• The refrigerator's water filter indicator light turns on

This OEM GE part can also be used on Hotpoint, RCA, and Kenmore/Sears appliances. 

This SCR is a solid-state switching module that controls on/off power flow in select appliance circuits. Replacing a failed SCR helps stop intermittent operation and restores reliable switching for affected motors or heating elements. What it does:

• Regulates electrical switching in the control circuit to turn motors or heaters on and off.
• Used where a solid-state switch is required for smooth, repeatable control.
• Symptoms of a failing SCR: appliance won't start, runs intermittently, hums without operating, or a controlled circuit does not respond.
• Restores proper switching when the original SCR is shorted, open, or erratic.

• Disconnect power to the appliance before beginning service; follow lockout/tagout procedures.
• Handle as an electronic component—avoid static discharge and protect the spade terminals from bending or contamination.
• Ensure correct orientation and secure mounting; reconnect wiring exactly as shown on the appliance wiring diagram.

A #8-18 x 9/16-inch hex washer head screw used to secure panels and components in appliances. Provides a proper fit for fast, reliable fastening when replacing missing, damaged, or stripped screws. What it does:

• Secures panels, brackets, and trim to keep components aligned and stable.
• Restores proper fastening when threads are stripped, the original screw is missing, or a head is damaged.
• Helps stop rattling or loose parts caused by worn or broken fasteners.
• Fits applications requiring a #8-18 thread with a 9/16" length and hex washer head style.

• Verify thread size, head style, and length before installation.
• Use the correct hex driver or socket to avoid cam-out or head damage.
• Do not overtighten; snug until secure to avoid stripping threads or deforming parts.
• Disconnect power and follow appliance-specific safety steps.

8-18 CA HX 1/2 S

The Vegetable Pan Assembly an OEM part for GE refrigerators. This assembly is specifically designed to fit on the right side of your refrigerator's vegetable pan, offering a convenient storage solution for your fresh produce. It provides a designated space to keep your produce separate and easily accessible, helping to maintain their freshness and quality.

A bad vegetable pan assembly can occur due to accidental damage, wear and tear, or other factors. If you notice symptoms such as cracks, broken tabs, or a loose fit on your current assembly, it may be time to replace it with a new one.

Symptoms of a bad vegetable pan assembly include:

• Cracks or damage
• Broken tabs
• Loose fit on the pan

Improve the organization of your fresh produce by replacing the faulty vegetable pan assembly with this genuine OEM part.

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.
 

The Meat Pan Slide is an OEM part for GE refrigerators. It is located on the upper shelf and allows for pulling out a multi-purpose pan ideal for storing large food items. 

Causes of a bad Meat Pan Slide can include damage or deformity from exposure to heavy loads over time, broken or cracked plastic parts from repeated pull-out/push-in movement, or obstruction from built-up ice or debris inside the rails.

Symptoms of a bad Meat Pan Slide include:

• The slide becomes stuck and failing to extend or retract
• Gaps appearing between the slide and rails allowing for food items to fall 
• Cracked or broken parts that cause instability or inability to properly support food pans

This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore models.

This meat pan divider separates foods inside the deli/meat pan to prevent cross-contact and keep items organized for easier access. It restores the original compartment layout so deli trays stay separated and tidy. What it does:

• Fits into the refrigerator's meat/deli pan to create separate sections for different foods
• Prevents items from shifting and mixing during drawer use
• Helps contain juices and reduces cross-contamination between foods
• Useful when cracked, missing, or warped dividers allow foods to mingle

• Slide the divider into the existing grooves or slots in the meat/deli pan; no tools typically required
• Clean surfaces and sanitize the divider before first use
• Do not use in the oven or expose to open flame; intended for refrigerator use only
• Inspect for proper seating after installation to ensure secure separation

This deli pan top rear cover replaces the rear trim piece on the deli/warming top, restoring a finished appearance and protecting internal components from food, grease and spills. Keeps the deli area sealed and easier to clean. What it does

• Covers and protects the rear edge of the deli/warming pan top assembly.
• Shields wiring and internal components from food debris and grease buildup.
• Restores a proper fit and finish when the original rear trim is cracked, broken or missing.
• Helps maintain a clean, hygienic deli surface and simplifies wiping and maintenance.

• One deli pan top rear cover.

• Disconnect power to the appliance before beginning any service.
• Removal may require releasing clips or removing a few screws; keep hardware for reassembly.
• Handle the cover gently to avoid cracking; align tabs/clips before seating.

This side track guides and supports the freezer door as it slides open and closed, restoring smooth, stable door movement and proper alignment. Fits the freezer compartment track assembly on compatible GE refrigerators. What it does:

• Provides a smooth, low-friction path for the freezer door to slide on
• Keeps the door aligned to prevent binding, rubbing, or uneven gaps
• Helps reduce noise and sticking when opening or closing the freezer door
• Replaces a worn, cracked, or bent side track that causes door misalignment

• Basic hand tools typically required; fastener types before starting
• Require partial door removal or loosening to access and replace the track
• Inspect mating rollers or guides while installing and replace if damaged
• Disconnect power to the appliance and follow safety precautions before servicing

This center track guides and supports the fresh-food door drawer, helping the drawer slide smoothly and stay aligned for reliable access and seal. Replaces a worn or damaged center track to restore normal movement and alignment. What it does:

• Provides a stable sliding surface for the fresh-food drawer/door
• Restores smooth opening and closing when original track is worn or cracked
• Helps maintain proper door alignment to reduce gaps that can affect cooling
• Common symptom: drawer sticks, jams, or tilts during operation

• One center track for the fresh-food drawer/door

• Turn off power to the appliance before beginning any service
• Access usually requires removing the drawer/door assembly and fasteners; keep hardware organized
• Inspect companion tracks and rollers; replace any worn pieces to ensure smooth operation

This refrigerator shelf assembly restores a sturdy, level storage surface inside your refrigerator. Replace a cracked, broken, or missing shelf to keep food organized and maintain proper spacing for airflow and consistent cooling.

• Provides a flat, supportive surface for food and containers
• Seats into factory supports at the correct height and alignment
• Helps organize contents and maintain clear airflow paths
• Common symptoms: cracked or shattered shelf, broken frame tabs, shelf sags or won't sit level, missing shelf

• Remove all items from the area; handle the shelf carefully—edges can be sharp and glass can break; wear cut-resistant gloves
• Lift/slide the old shelf out of the side supports; inspect supports for damage
• Seat the new shelf fully into the rails or pegs so it's level and secure
• Confirm it's properly supported before reloading with items

The Shelf Assembly Tuckaway is an OEM component for GE side-by-side refrigerators equipped with bottom drawer storage. Adjustable and positioned on extension rails within cabinets, it provides extra tucked-away organization and shelving alternatives. Multi-level access relies on fully functional shelving systems.

Causes of a defective tuckaway assembly involve loosened mounting clips reducing secure fit over repeated extension/retraction cycles, wear from constant sliding contact weakening smooth retraction of rails, or damaged runner wheels increasing drag during movement.  

Symptoms include:  

• Shelves not holding steady positions when extended or retracted  
• Dislodged shelves unable to bear moderate weight distribution
• Squeaking and rubbing sounds were heard along the rails during the movement

Replacing with this genuine GE lower drawer shelf ensures reliable tucked storage potential through resilient materials and precision engineering. Compatible with Hotpoint, RCA, or Kenmore lower-tier pantry optimization.
 

The Temperature Sensor is an OEM replacement part for GE refrigerators, designed to accurately monitor and relay the temperature inside the refrigerator and freezer compartments to the electronic control board. By detecting the slightest changes in internal temperature, the sensor allows the control board to make real-time adjustments to the cooling system, activating the compressor and fans as needed to maintain optimal conditions for food preservation.

Over time, the temperature sensor can fail due to electrical issues, exposure to moisture, or general wear and tear. A malfunctioning sensor can lead to improper temperature regulation, affecting the efficiency of the refrigerator and the freshness of stored food.

Symptoms of a bad Temperature Sensor include:

• The refrigerator or freezer not maintaining the set temperature 
• The appliance running continuously or more frequently than normal
• Inaccurate temperature readings displayed  

This OEM GE part can also be used on Hotpoint, RCA, and Kenmore/Sears appliances. 

This roller assembly helps refrigerator drawers and baskets glide smoothly along their tracks. When the wheel or bracket wears or breaks, drawers can stick, scrape, or sit unevenly—replacing the roller restores easy, consistent movement.

• Supports and guides a drawer or basket on its track
• Restores smooth in-and-out sliding action
• Replaces a cracked, worn, or missing wheel/bracket
• Common symptoms: drawer hard to open/close, scraping noise, drawer tilts or drops

• Disconnect power and remove the affected drawer/shelf to access the roller
• Note orientation; remove retaining screw or clip and detach the old roller
• Position and secure the new roller—avoid overtightening into plastic
• Reinstall and test the drawer; clean the tracks and check for damage or misalignment

This guide roller is used in the vegetable/crisper pan area. It supports and guides the drawer along its track so it glides smoothly and stays aligned when opening and closing, replacing a worn, cracked, or missing roller.

• Supports the vegetable/crisper pan on its slide path to reduce friction
• Helps the drawer roll in and out smoothly and evenly
• Maintains alignment to prevent binding, sagging, or the pan dropping off the track
• Common symptoms: drawer hard to open/close, wobbles, scrapes, or a visibly broken/missing roller

• Disconnect power before servicing
• Remove the crisper drawer and cover/shelf as needed for access
• Detach the damaged roller from its mount and attach the new roller securely
• Reinstall components, confirm smooth, even travel, and test drawer operation

This damper controls airflow to the refrigerator vegetable/produce pan to help maintain proper humidity and cooling for fresh food. Replacing a worn damper restores balanced airflow and helps keep produce crisper. What it does:

• Opens and closes the vent to regulate cold air entering the vegetable/produce pan
• Helps maintain proper humidity and temperature in the crisper area
• Commonly used when produce becomes wilty or the fresh-food compartment cools unevenly
• Prevents overcooling or insufficient airflow to the crisper drawer

• Disconnect power to the appliance before attempting repair
• Remove shelves/drawers as needed for access; handle glass shelves carefully
• Verify damper orientation and secure mounting before reassembly

The ART FRAME VP ASM is an OEM replacement part for GE refrigerators. It provides an adjustable lid solution to seal the humidified drawers within the fresh food compartment. 

Symptoms of a bad ART FRAME VP ASM include:

• Gaps that fail to maintain proper humidity levels within drawers
• Covers that will not securely latch or lock into place  
• Cracks or breaks inhibiting a proper seal

Causes can include normal wear over time, and accidental impacts compromising the integrity of the plastic material. Warping may occur from overloading.

This GE part is also compatible with Hotpoint, RCA, and some Kenmore models.

The Vegetable Drawer Cover Glass is an OEM part for GE refrigerators. This glass cover sits above the vegetable drawer, providing a sturdy surface for additional storage while helping to maintain the humidity levels within the drawer. The glass cover helps to keep produce fresh by creating a more controlled environment in the vegetable drawer. The glass has approximate dimensions of 31 x 10-1/4 inches. 

Symptoms of a failing Vegetable Drawer Cover Glass include:

• Cracks or breaks in the glass, which can compromise its structural integrity
• The cover not fitting properly or being loose, which can affect the efficiency of the vegetable drawer
• Visible damage or wear that affects the appearance or functionality of the cover
• Difficulty in sliding the vegetable drawer in and out due to misalignment

Causes of a bad vegetable drawer cover glass can include accidental impacts, overloading the surface with heavy items, or normal wear and tear over time.

This OEM GE part is also compatible with some models from Hotpoint, RCA, and Kenmore.

This bar reinforcement is a replacement support brace that restores strength and alignment to the appliance trim or door assembly. It helps secure panels and prevents sagging or flexing for reliable everyday use. What it does:

• Provides structural support for the door or trim assembly to reduce flex and maintain alignment
• Restores a loose or sagging panel to proper position
• Helps keep connected components stable during normal operation
• Designed to fit into the original mounting points and distribute load where the factory part did

• Follow the appliance manufacturer's service manual for disassembly and reassembly steps
• Use appropriate hand tools; avoid overtightening fasteners to prevent damage
• Disconnect power (or gas, if applicable) and remove food/contents from working area before starting