Parts for Ge ZISS360DKCSS: Fresh Food Shelves Parts

The water filter is an OEM part for GE refrigerators. This filter removes or reduces various contaminants.

Features and Benefits:

• Easy DIY replacement, typically mounted inside the refrigerator at the back of the compartment.
• Removes or reduces various contaminants in your water and ice, including lead, cysts, asbestos, atrazine, , taste and odor, chlorine, sediment, turbidity, and more
• NSF/ANSI 42 and 53 standards
• 6 Month lifespan filter
• Carbon Block media
• Micron rating: 0.5-1 micron (Class I)

When to replace your filter:

• Bad taste or odor in water and ice
• Cloudy or discolored ice
• Reduced water flow or pressure
• Refrigerator replace filter indicator light is on

Note: If replacing the Culligan metal canister design filter for the first time, a special adapter, part number AP2615702 is needed, which is not included with this part. The compatible bypass cap is part number AP6891551.

This OEM GE part can also be used on Hotpoint, RCA, and Kenmore/Sears appliances. 
 

A 36-inch glass refrigerator shelf that provides a sturdy, easy-to-clean surface for organizing fresh food. Restores usable storage space and helps keep items level and visible. What it does:

• Replaces a cracked, chipped, or missing fresh-food glass shelf to restore storage stability
• Supports food containers and prevents items from falling between compartments
• Easy-to-clean tempered glass resists everyday stains and spills
• Helps maintain an organized interior for better visibility of stored items

• Remove food and any items before replacing the shelf
• Handle with care and wear cut-resistant gloves; tempered glass can break if improperly supported
• Slide into existing shelf supports or mounting tracks until fully seated; do not force
• Your refrigerator's owner manual for model-specific instructions and safety guidance

This snack pan assembly replaces the factory snack pan to restore shelf storage and organization in the refrigerator. It provides a stable tray for small items and helps keep foods separated and accessible. What it does:

• Replaces a cracked, warped or missing snack pan to restore usable shelf space
• Supports lightweight food items, snack packs and deli containers
• Helps prevent spills from spreading to lower shelves
• Fits into the refrigerator snack/pantry area to maintain orderly storage

• Install by sliding the pan into the existing refrigerator rail slots until seated
• No special tools required for most installs; handle carefully to avoid chipping or cracking the plastic during installation
• Disconnect power only if service requires removing interior panels near electrical components

This inner drawer slide guides and supports a refrigerator drawer/bin so it opens and closes smoothly. Replacing a worn or cracked slide restores proper alignment and easy, consistent movement of the drawer.

• Provides guided travel for the drawer along the cabinet rails
• Helps keep the drawer level and properly aligned to prevent binding
• Replace if the drawer sticks, grinds, jumps track, or won't close fully
• Visible cracks, broken tabs, or excessive wobble indicate a failed slide

• Unplug the refrigerator before servicing; remove the drawer and its contents
• Note the orientation of the old slide and reuse the existing mounting hardware
• Install the new slide in the same position; tighten screws evenly without overtightening
• Test drawer movement and ensure it seats flush and glides smoothly end to end

This wire support holds the refrigerator veg/crisper pan in place so drawers stay level and slide smoothly. It replaces a bent, broken or missing support to restore proper pan alignment and storage stability. What it does

• Provides a stable mount for the veg/crisper pan so drawers sit and slide correctly
• Prevents the pan from sagging or tilting under load
• Helps stop binding or rubbing that can occur when a support is damaged
• Commonly replaced when the support is bent, cracked or missing

• One veg/crisper pan wire support

• High-level replacement: remove the drawer and lift the pan to access the support; reinstall in the same location
• Use gentle pressure to seat the support into its mounts; do not force or bend the part
• Unplug the appliance or disconnect power at the breaker before working near electrical components
• Wear gloves to protect hands from sharp sheet-metal edges

This right-hand pan side support secures the refrigerator drain/drip pan, helping keep the pan aligned and stable to prevent sagging or movement that can lead to noise or water pooling under the appliance. What it does:

• Holds the drain/drip pan in the correct position at the right side of the cabinet
• Prevents pan sagging that can cause vibration or rubbing noises
• Helps maintain proper pan alignment to reduce the chance of water spills or pooling
• Replaces worn, cracked or broken side supports that no longer secure the pan

• Disconnect power to the appliance before beginning any repair
• Access may require removing the kickplate/grille and/or sliding out the pan
• Handle plastic parts carefully to avoid cracking; confirm correct side (right-hand) before installation
• If fasteners are stripped or damaged, replace them with OEM-recommended hardware

This left-side pan support secures and aligns the refrigerator pan/drawer, restoring stable, level support for smooth drawer movement and proper pan positioning. It's a simple replacement that prevents sagging or misalignment. What it does:

• Supports the refrigerator pan or deli drawer on the left side to keep it level and stable
• Holds the pan in place so drawers slide smoothly and don't catch or tilt
• Failsafe for preventing pan sagging or partial drops when the original clip breaks
• Helps maintain proper airflow and drawer operation by keeping components aligned

• Disconnect power to the appliance before servicing to reduce shock risk
• Remove the pan/drawer per your model's diagram to access the support
• Replacement typically snaps or screws into the same bracket location — align tabs and press firmly until seated
• Inspect adjacent supports and mounting clips; replace any damaged pieces to ensure proper fit

This outer drawer slide supports and guides a refrigerator drawer or pantry pan so it opens and closes smoothly. Replacing a worn or cracked slide restores alignment and helps prevent sticking, tipping, or spills.

• Attaches as the outer rail for the sliding drawer assembly
• Provides smooth gliding action and supports the drawer/pan
• Helps keep the drawer level and properly aligned
• Common symptoms: drawer hard to move, tilts or falls, cracked/broken rail, scraping or binding

• Disconnect power; empty and remove the affected drawer
• Remove the shelf/cover if needed to access the slide
• Take out mounting screws/clips; note the slide's orientation
• Install the new slide, ensure rails are parallel, and test drawer travel

A 6 x 1/2 inch pan-head Phillips screw used to fasten panels, trim, brackets and small assemblies on appliances. Replacing worn or missing screws restores secure mounting and reduces vibration or rattling. What it does:

• Fastens panels, brackets and trim where a 6 x 1/2 in. pan-head Phillips screw is required.
• Stops loose or rattling parts caused by missing, stripped or corroded screws.
• Provides the correct head profile for a Phillips driver to allow proper torque and seating.
• Used in non-structural fastening points on appliances.

• Always disconnect power and unplug the appliance before beginning repairs.
• Use the correct-size Phillips screwdriver to avoid cam-out and head damage.
• Do not over-tighten; over-torquing can strip threads or deform mating parts.
• Inspect mating threads and replace damaged components before installation.