Parts for Ge C2S950M2N1S5: Gas & Burner Parts

This LP high-altitude conversion kit adapts select gas cooking appliances for liquid propane use at elevation. It properly meters gas flow so burners light easily and produce clean, stable flames in thin-air conditions.

• Configures the appliance for LP operation in high-altitude installations
• Calibrates fuel delivery to maintain proper flame size and combustion
• Helps address yellow/sooty flames, flame lift, or hard-to-control simmer after conversion
• Promotes reliable ignition and even heat across burners

• Conversion affects gas type and pressure; must be performed per the manufacturer's instructions and local codes
• Shut off gas and power before service; work in a well-ventilated area away from open flames or sparks
• After conversion, leak-test all connections and adjust air shutters per model guidance if applicable
• Intended for LP high-altitude applications only; use the model-specific kit specified by the manufacturer

The LP Conversion Kit is an OEM part compatible with GE gas ranges. It allows the range to safely operate on liquid propane gas rather than natural gas. The conversion kit includes all necessary components to switch fuel types, such as LP orifices and installation instructions. 

Causes of needing conversion include changing your home’s gas service from natural to liquid propane or installing the range in a location only supplied by LP tanks.

Symptoms of an improper or missing conversion can be:

• Yellow flame tips during cooking  
• Incomplete combustion of LP gases
• Decreased heat levels or uneven cooking 
• Potential gas leaks or hazardous situations

This GE LP kit is compatible with Hotpoint, RCA, and select Kenmore models too.

The Range NG High Altitude Kit is an OEM part for GE gas ranges. This high-altitude conversion kit allows the range to operate properly at elevations above 2000 feet.

Causes related to needing this kit are using the range at a high elevation without proper adjustment for decreased air pressure and oxygen levels.

Symptoms of needing this high-altitude kit include:

• Unstable or inconsistent flame during operation
• Excessive cooking times
• Incomplete combustion of gas resulting in carbon monoxide issues

This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore models.

This economic nut is a small replacement fastening nut that restores secure connections for appliance components. It replaces worn or missing hardware so panels and internal parts stay firmly seated and reduce vibration. What it does:

• Secures components and panels by threading onto the matching stud or bolt to hold assemblies in place
• Prevents loose or rattling panels and hardware caused by a missing or damaged nut
• Restores proper fit for user-accessible panels and internal brackets where this nut is specified
• Simple hardware replacement to regain stable mechanical connections

• Disconnect power and water (if applicable) and follow basic electrical safety before servicing the appliance
• Use the matching size wrench or socket; thread-on by hand first to avoid cross-threading, then snug—do not overtighten
• Inspect mating stud or bolt for damage; replace hardware that is stripped, corroded, or deformed

Size: 8 - 32 inch.

This small V2 inlet jet directs water flow to the dispenser/ice-making area so the appliance fills and forms properly. It restores correct water routing for consistent filling and helps reduce weak or misshapen ice or slow dispensing. What it does:

• Channels water to the ice maker/dispenser so the correct amount reaches the fill area.
• Helps ensure uniform ice formation and consistent dispenser flow.
• Can resolve symptoms like weak/slow dispensing, underfilled ice trays, or uneven ice cubes.
• Works as the small replacement nozzle where the original inlet jet is worn or blocked.

• One small V2 inlet jet

• Disconnect power and shut off the water supply before beginning work.
• Access may require removing inner panels or the ice maker/dispenser housing; follow your model's service instructions.
• Inspect the seat and surrounding fittings for debris or damage before installing; replace other damaged components as needed.

The Medium surface burner base is an OEM part for GE ranges. It serves as the base for the surface burners, covering and protecting the burner cavities.

Causes of a bad surface burner base include warping or deformation from high heat over time, cracks or breaks from impact damage, or corrosion from liquid spills or grease accumulation.

Symptoms of a bad surface burner base include:

• Burners no longer sitting flush or securely on the cooktop surface
• Excessive air gaps around the burners allowing gas/flames to escape
• Difficulty cleaning due to liquid leaks into the burner cavities
• Visible cracks, breaks, or deformities in the material

This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore models.

This switch harness is the factory-style wiring assembly that connects the appliance's control switches to power and control circuits, restoring proper electrical connection and reliable switch operation. What it does:

• Provides the correct plug-and-play wiring connections for the control switches
• Routes power and signals between switches and the appliance control system
• Helps resolve symptoms like unresponsive switch controls, intermittent element operation, or control lights not working
• Matches OEM connector housings and wire colors for straightforward replacement

• Always disconnect power to the appliance before starting any repair
• Compare the new harness to the old one to ensure connector types and wire routing before installation
• Route harness along the same path and secure with existing clips or ties; avoid contact with sharp edges or hot surfaces
• If any connector pins are damaged or terminals are loose, replace the connector or harness rather than reusing damaged parts

This genuine OEM GE replacement is compatible with additional Hotpoint, RCA and Kenmore gas range models.

This orifice spud meters gas to a burner, controlling flow for a correct, stable flame. Replace a clogged or damaged spud to restore reliable ignition and proper flame characteristics.

• Threads into the orifice holder to regulate gas flow to the burner head
• Helps maintain proper flame height and shape during cooking
• A clogged or damaged spud can cause weak/uneven flames, yellow tipping, or delayed ignition
• Replacing the spud can improve lighting and flame consistency

• Disconnect power and shut off gas; allow the appliance to cool completely
• Remove grates, caps, and burner heads (as applicable) to access the orifice
• Support the orifice holder while loosening/tightening the spud to avoid twisting the gas tube
• After reassembly, restore gas and check for leaks with an approved leak-detection solution; verify proper burner operation

This 1/4-20 screw secures panels, brackets, and other assemblies in your appliance. It restores a tight, reliable hold when an original fastener is missing, stripped, or corroded.

• Fastens components that require a 1/4-20 threaded screw
• Helps keep panels and assemblies aligned and rattle-free
• Direct replacement for worn, rusted, or lost hardware
• Common symptoms: loose or vibrating parts, misaligned brackets, missing fastener

• Disconnect power; turn off gas supply before servicing
• Allow the appliance to cool; wear gloves and eye protection
• Start threads by hand to avoid cross-threading; use the correct driver/tool
• Tighten snugly—do not overtighten to prevent stripping or damage

This orifice holder secures the gas orifice on a cooktop burner to help maintain correct gas flow and stable flames for reliable cooking performance. It replaces worn or damaged holders to restore burner operation. What it does:

• Secures the burner orifice so gas is delivered at the proper position and rate
• Helps maintain a steady, even flame for consistent heating
• Can resolve symptoms like a burner that won't light or produces a weak/uneven flame
• Works with the burner assembly to support correct ignition and combustion

• One orifice holder

• Turn off the gas supply and electrical power before removing or installing the part
• Use basic hand tools; handle components carefully to avoid damaging the orifice
• Do not over-tighten fittings; ensure proper alignment before reassembly

This CF orifice holder secures the gas orifice and aligns it with the burner so the range oven delivers a steady, correctly routed gas flow. Replaces worn or damaged holders to restore proper burner operation. What it does

• Holds and positions the burner orifice so gas flows into the burner tube
• Helps maintain a consistent, focused flame for reliable heating
• Can prevent misalignment that causes weak or uneven flames
• Commonly replaced when burners won't light or show erratic flame behavior

• One CF orifice holder

• Shut off the gas supply and power to the appliance before servicing
• Remove surrounding grates/burner caps and follow OEM disassembly diagrams
• Hand-start fasteners and tighten securely; avoid over-torquing

The Valve Burner is an OEM component for GE gas ranges. Located below the grates atop each cooktop burner, it precisely mixes gas and air to provide controllable flames. A valve adjusts gas flow while perforated metal distributes the flame evenly. 

Symptoms of a faulty valve burner include: 

• Difficulty obtaining or maintaining set flame levels  
• Unstable or intermittent burner operation
• Yellow fire or flame that produces excessive soot
• No ignition or fire when the knob is turned

Causes can be wear of internal valve components, debris, or clogs in gas ports restricting flow over time. Damage from spills or dropped objects may also crack the burner.

This OEM GE burner is also compatible with models from Hotpoint and RCA.

The BURNER VALVE is an OEM part for GE gas ranges. It regulates gas flow to individual cooktop burners, controlling flame size and heat output based on valve position.

Symptoms of a bad burner valve include: 

• Inability to adjust or maintain desired flame levels
• Gas odor or clicking/hissing noises from the burner area  
• Burners that remain constantly on without response to controls

Gas valves can weaken or crack over many heating/cooling cycles. Mineral buildup may also restrict precise flow regulation. Replacing the faulty valve with this genuine GE part restores the burners' heat-adjustable functionality for custom cooking power. 

This OEM GE replacement burner valve is also compatible with some Kenmore and RCA gas range models. Reliable control over burners maximizes versatility and safety.
 

The Valve and Burner Assembly is an OEM part for GE gas ranges. As the primary mechanism for fuel ignition and burner operation, it works to deliver gas to each burner safely and control flame intensity precisely. 

Symptoms of a bad valve and burner assembly include:

• Inability to light one or more burners
• Unstable, excessively large or small flames  
• Burners that will not maintain the desired heat setting
• Gas leaks around the burner area

Causes can be normal damage over time from heat exposure, cracks developing in valve components, blockages in gas ports, or loose connections. Installing this OEM replacement ensures your range's burners operate efficiently.

This GE part is also compatible with some Hotpoint, RCA, and Kenmore ranges and restores reliable stove-top cooking performance. Replace yours today before minor problems worsen.
 

This range burner valve controls gas flow to a single stovetop burner to restore reliable ignition and consistent flame control. Use it to replace a worn or leaky valve and help return safe, stable burner operation. What it does:

• Regulates gas delivery to one burner for proper ignition and flame adjustment
• Stops or reduces gas flow when the control is turned off to prevent leaks
• Helps resolve symptoms such as burners that won't light, weak or uneven flames, or persistent gas smell near a burner
• Works as the valve assembly that connects the cooktop knob to the burner gas line

• Turn off gas supply and electrical power to the appliance before beginning service
• Use appropriate tools and pipe sealant rated for gas if re-connecting gas lines
• After installation, test all connections for leaks with a soap solution or approved leak detector

This Injet MRHOB assembly is a replacement component designed to restore the original part function in compatible appliances. It replaces a worn or damaged MRHOB assembly to help return the unit to normal operation. What it does:

• Serves as the direct replacement assembly for the appliance's Injet MRHOB component
• Restores mechanical/electrical connection where the original MRHOB has failed
• Can address symptoms such as intermittent operation, loss of function, or component-related error codes when the MRHOB is faulty
• Used when inspection shows the existing MRHOB is cracked, corroded, or otherwise damaged

• One Injet MRHOB assembly

• Install only after disconnecting power to the appliance to avoid shock or injury
• Refer to the OEM installation instructions for correct placement and wiring
• Use proper tools and replacement practices

This inject burner assembly replaces a damaged or worn hob injector to restore proper gas flow to a cooktop burner. It provides the correct metered fuel delivery for consistent ignition and stable flame control. What it does:

• Directs and meters gas from the manifold into the burner for predictable burning
• Helps burners light promptly and maintain an even flame
• Can resolve weak flames, uneven heating, or failure to light when caused by the injector
• Works with the burner head and cap to form the complete burner flame assembly

• Turn off the gas supply and unplug the appliance before starting any work
• Inspect gaskets and fittings for leaks; replace or tighten per manufacturer guidance
• Use proper tools and follow OEM diagram orientation for correct installation

This pressure regulator controls and stabilizes the incoming gas supply to your range/oven's manifold, delivering steady burner flames and consistent oven heat. Replace a failed regulator to correct weak flames, surging, or erratic heating performance.

• Regulates incoming gas line pressure to the appliance manifold for proper operation
• Helps address symptoms such as low heat, yellow/orange flames, surging/lifting flames, or burners that won't stay lit
• Supports consistent oven temperatures by maintaining stable fuel pressure
• Typically located where the gas supply enters the rear of the range

• Shut off gas supply and disconnect electrical power before servicing
• Orient the regulator's flow arrow toward the appliance/manifold
• Use a gas-rated thread sealant on tapered pipe threads; do not overtighten
• After installation, leak-test all connections with an approved solution—never with an open flame

This simmer tube dual valve assembly routes and controls low gas flow to a range burner so you can maintain low, steady heat for simmering. It replaces a worn or damaged simmer tube/dual valve to restore consistent low-flame performance. What it does:

• Directs and meters low gas flow to the simmer/burner port for stable low-heat simmering
• Replaces cracked, corroded, or leaky simmer tubes that cause uneven or no low flame
• Helps stop gas leaks at the tube/valve connection when the original part is failing
• Works with the burner's low-flame/simmer function rather than main high-flame operation

• Turn off gas supply and electrical power to the appliance before starting work
• Use appropriate wrenching and sealing methods on gas fittings; tighten to OEM torque specs
• Inspect nearby fittings and burner parts for damage while replacing the tube

This air deviator routes and directs cold airflow inside the refrigerator to balance temperatures between compartments and improve cooling performance. It restores proper air distribution when the original piece is cracked or misaligned. What it does:

• Redirects chilled air from the evaporator to the correct compartment to help maintain even temperatures
• Helps prevent warm spots caused by blocked or misdirected airflow
• Works with the fridge's air circulation path to support normal cooling cycles
• Common symptom: uneven cooling or air bypass near the evaporator cover

• One air deviator

• Inspect and replace only when the existing deviator is broken, warped, or missing
• Handle plastic parts gently to avoid cracking; align tabs before snapping into place
• Always unplug the appliance before accessing internal panels or components
• No special tools typically required;