Parts for White Outdoor 41ADW80G990: General Assembly Parts

This is a throttle trigger assembly for a string trimmer. This part is used to engage the throttle cable, which opens the carburetor to add more of a mix of fuel and air into the combustion chamber. A new throttle trigger assembly will be needed if it is damaged in a way that prevents it from operating correctly. It could be broken by physical impact or could wear out with normal extended use. If the throttle trigger is not effectively actuating the throttle cable, it will need to be replaced. Allow the trimmer plenty of time to cool down before attempting to perform any care or maintenance on the machine.This throttle trigger is made to be used with string trimmers. It's an OEM part sourced directly from the manufacturer and it is sold individually. This part is used on MTD, Craftsman, Yard Machines, McCulloch, Remington, White Outdoor, and Troy-Bilt brands.

The On/Off Switch is an OEM part for MTD outdoor power equipment. This switch is a crucial component for the safe operation of various types of lawn and garden equipment, including lawn mowers, snow blowers, and other powered tools. 

Causes of damage to the On/Off Switch often involve wear and tear from regular use, exposure to harsh outdoor conditions that can corrode or damage electrical components, or accidental impacts that can physically damage the switch.

Symptoms of a bad On/Off Switch include:

• The equipment failing to start
• The machine not stopping when the switch is turned to the off position
• Intermittent power or erratic starting and stopping

This OEM replacement part can be used on trimmers from Craftsman, Yard-Man, Cub Cadet, Bolens, Ryobi, Huskee, Troy-Bilt, MTD, Murray, and Yard Machines.

This part is a replacement handle bracket assembly. This is a genuine OEM part made by MTD and has been sourced directly from the manufacturer. It is intended to replace a defective or broken handle bracket assembly in line trimmers.This handle bracket assembly ensures that the line trimmer handlebars are securely and properly attached to the drive shaft. This part will require replacement if corroded, faulty, or broken in any way. Wear work gloves to protect the hands and check that equipment is powered off and cooled down before starting the repair process. For more accurate information on how and where to use this handle bracket assembly, the appropriate owner's manual and equipment diagrams should be referred to. This handle bracket assembly is a genuine OEM part made of durable metal and is sold individually. It is suitable for use with line trimmer models that have been manufactured by MTD, Craftsman, Troy-Bilt, and other brands.

This is a trimmer head used with string trimmers, weed wackers, and edgers. When in use, it rotates, cutting grass. If the trimmer head stops rotating or cutting grass, it is time to order a replacement part. In order to complete the replacement process for trimmer heads, the user will need to pry the trimmer head off of the trimmer. Use a flathead screwdriver to loosen it. After pulling the old trimmer head off the nut on the bottom of the shaft, insert this replacement head onto the trimmer shaft.This trimmer head is a genuine OEM part sourced directly from the manufacturer, and it is sold individually. It is compatible with brands such as Craftsman, Cub Cadet, Ryobi, Troy-Bilt, Yard Machines, MTD, Bolens, and Yard-Man.

This replacement part is a screw, and it is intended for use in different types of lawn equipment. This is a genuine replacement part made by MTD. Screws are found in almost every different type of machinery and are essential to the overall performance of different devices. Screws are responsible for holding things in place and securing them tightly so that the machine can operate smoothly and efficiently. A new screw might be needed if the current one is damaged or missing. It is possible for screws to be stripped over time and can become stuck in place. In this case, pliers might be needed to remove the faulty screw. Otherwise, this repair should be fairly simple and only require a screwdriver. Be sure the machine is powered down before replacing this part. This specific screw is sold individually and is a genuine OEM replacement part. Be sure to purchase the correct amount as many devices require more than one.

This is an anti-rotation screw. The lower handle clip on many devices, including lawn and garden equipment and tools, holds an anti-rotation screw. With use, over time, or because of other damages, the screw may be broken or stripped. When this occurs, a replacement anti-rotation screw is required to keep the machine secured together correctly for safe use.The replacement of an anti-rotation screw is quick and easy. A Torx screwdriver is recommended for replacing the part. Allow the machine to cool completely before working with it. Wear protective gloves for safety always. Remove a stripped or worn out screw if there is one present before securing in the new part to the lower handle clip.This anti-rotation screw is a genuine OEM part. It is sourced from the manufacturer. The replacement part is sold as an individual unit. The piece is made from high-quality, durable metal. It can be used in a variety of brands, including Ryobi, Troy-Bilt, MTD, Bolens, Yard-Man, Yard Machines, and Cub Cadet. The anti-rotation screw is compatible with many models of blowers, cultivators, edgers, snowblowers, trimmers, vacuums, and other tools and lawn and garden equipment.

This replacement part is a palnut. This is a genuine replacement part made by MTD. Palnuts are small but important to the overall workings of appliances. These parts work with other small pieces like screws and washers to ensure that the machine is able to work properly during use. A new palnut might be needed if the current one is missing or damaged. This can be caused by normal wear and tear with years of extended use or from a single incident that may have caused damage. It is normal for this part to endure large amounts of friction over time, and so it can become worn down with extended use. This palnut is a genuine OEM replacement part. This part is sold individually and is sourced directly from the manufacturer. "

This part is a 4-tooth brush blade that is used on weed trimmers. The purpose of a brush blade is to cut brush and weeds. This component attaches to the gearbox.A new 4-tooth brush blade may be needed if the weed trimmer is not properly cutting brush or grass. If this component is cracked, broken, dented, or otherwise damaged in any way, it will need to be replaced. Use extreme care when handling any moving components on outdoor power equipment and never attempt care or maintenance on a machine that is powered on. Remember to wear gloves when operating or performing care and maintenance on any outdoor power equipment.This 4-tooth brush blade is a genuine MTD part. It is sold individually. This particular 4-tooth brush blade is compatible with weed trimmers that are manufactured by MTD, Craftsman, and Ryobi.

This is a blade lock nut that is typically a component of string trimmers and edgers. The blade lock nut ensures the cutting blade is securely attached to the shaft of the trimmer. If the nut is corroded, broken, or has come loose, it will need to be replaced. The equipment should not be operated without this nut since other components could come loose and fall off.This is a simple part to replace and will require only a wrench or a socket set. This nut is located on the spindle, so a visual inspection can be done to ensure it is damaged or broken. Remove it and thread the new blade lock nut to the same location. If the nut is stripped, a bolt remover can be used to get it off of the lawn equipment.This blade lock nut is sold as an individual part. It is an authentic OEM replacement part that is sourced directly from the manufacturer. The part is made to fit a variety of edgers and string trimmers manufactured by Craftsman, Cub Cadet, MTD, Ryobi, and Yard Machines.

This replacement part is a locking rod. This is a genuine replacement part made by MTD. This specific part is found in many different machines and is important for ensuring the user is kept safe if the compressed air supply fails.A new locking rod might be needed if the current one is damaged or missing. This can include being dented, cracked, or bent. If the user is noticing issues inside the machine, such as issues with the air compression, it can be due to a malfunctioning locking rod. Be sure the engine is powered down during this repair. Refer to the appropriate user manual before beginning to repair this part. This locking rod is sold individually and is sourced directly from the manufacturer to ensure proper fit. This part is a genuine OEM replacement part.

This reel spool assembly is specifically designed for use with string trimmers and comes with all necessary parts, including the trimmer line and the spool. The line itself is used when the trimmer is in use to cut grass and foliage. The spool is the component that the string is wrapped around to keep it secure while using the trimmer.If the reel spool or the line is damaged or broken, the reel spool assembly should be replaced. A wrench or a screwdriver will be needed to go through the process. When replacing the parts in the reel spool assembly, the spool cover will need to be removed. Make sure the string trimmer is on a sturdy surface and the spark plug wire has been disconnected. Place the spool assembly in the housing, feed the line, and replace the cap.This is an authentic OEM replacement part that is sourced directly from the manufacturer. It is sold as an individual component. The reel spool assembly is compatible with many string trimmers manufactured by Craftsman, Cub Cadet, Ryobi, Troy-Bilt, Murray, Yard Machines, MTD, Bolens, and Yard-Man.

This blade retainer kit is designed for use with string trimmers and edgers by many manufacturers. It comes with a metal retaining washer that is used with the blade, as well as the needed spool cutting heads. This kit also includes the nut needed to fasten the blade to the gearcase. It is used to install a blade onto the trimmer while adding stabilization through the nut. The parts in the blade retainer kit can become worn out during use and may need to be replaced.When the blade needs to be replaced or a part of the blade retainer kit is broken, removing the parts is required. Moving the blade involves turning the retaining bolt while the equipment is on a level surface. Next, undo the bolt holding the blade so it can be removed. The blade can be replaced at this time, as well as the parts from this blade retainer kit.This blade retainer kit is made for edgers and string trimmers manufactured by Yard-Man, Craftsman, Bolens, Ryobi, MTD, Troy-Bilt, and Yard Machines. It is a single retainer kit that comes as a genuine OEM replacement part sourced directly from the manufacturer.

A shoulder strap is a strap made to be attached to machinery in order to make the use of the machine easier, less awkward, and more comfortable for the user. It designed for use with outdoor lawn and garden equipment such as string trimmers, leaf blowers, and pole pruners. Fortunately, if a shoulder strap breaks, it will be very obvious and is easily fixed. Signs of a faulty shoulder strap include frayed edges, worn or thin fabric, or faulty attaching mechanisms holding the strap to the machine. The replacement or repair process is incredibly simple, as it requires no technical savvy or internal part replacement. Everything requiring replacement is visible from the outside of the machine.This shoulder strap is also sometimes referred to simply as a backpack harness assembly strap. The purchase of the shoulder strap does include any necessary mounting hardware needed to attach it to outdoor equipment. The shoulder strap is built to last and create a more pleasant experience while using a blower, vacuum, or pruner.This shoulder strap is a genuine OEM part sourced directly from the manufacturer, and it is sold individually. In most cases, since each strap is sold separately, if the user prefers to attach the shoulder straps in a way that resembles a backpack or harness instead of just a single shoulder strap, the purchase of two separate shoulder straps will be necessary. This particular backpack harness assembly strap is compatible for use with machines made by Craftsman, Ryobi, Troy-Bilt, Yard Machines, MTD, Bolens, and Yard-Man.