Parts for White Outdoor 31AE633E190 / 2002: General Assembly Sb-750 Parts

Chute won't rotate or adjust direction? This snow blower chute crank assembly restores manual directional control. Straightforward installation.

Cotter pin fastener for lawn tractors and riding mowers. Secures linkages, wheels, and moving parts. Replace if bent, missing, or worn for safety.

Carriage bolt for lawn mowers, snow blowers, tillers, and edgers. Works with a nut to secure metal components. Replace if worn, stripped, or missing.

Hex screw for outdoor power equipment. Replacement fastener for lost, stripped, or damaged screws. Installs in various assembly locations.

This 1/4-20 hex screw secures control panels to handles on lawn tractors and small gas-powered tools. Replace worn, stripped, or missing screws.

Replacement hose ferrule for lawn tractors and snow blowers. Connects and secures fuel or hydraulic lines. Replace if cracked, corroded, or leaking.

5/16-18 hex nut secures components on lawn mowers, tillers, and snow blowers. Replace when stripped, worn, or missing to ensure proper fastening.

Loose bolts or nuts coming undone? This cotter pin locks axles, rods, and bolts in place. Simple fastener replacement prevents parts from shifting.

Snow blower headlight housing assembly. Replace when housing is cracked, broken, or light won't secure properly. Verify fit with your model number.

Chute crank knob for snow throwers. Installs on the chute rotation control. Replace if cracked, broken, or missing to restore manual chute adjustment.

Star knob connects upper and lower handles on lawn mowers and outdoor equipment. Replace if threading is worn, cracked, or knob is missing for secure assembly.

Replacement push nut fastener for snow blowers. Secures components together. Order if your original is broken, missing, or no longer holding parts securely.

Replacement deck wheel for lawn tractors and riding mowers. Mounts under the mowing deck for support and smooth operation. Replace if cracked or worn.

Bell washer adds spacing on shafts in lawn tractors, tillers, mowers, and chipper shredders. Replace if washer is missing, worn, or damaged during maintenance.

Protective bushing for steering gear and chute crank assembly. Replace if steering feels loose or you hear clunking when turning. Verify fit with model number.

Lower shift rod for snow blower shift mechanism. Replaces worn, bent, or broken shift rods that prevent smooth gear changes. Direct fit part.

Rubber grommet for snow blower assembly. Fits through mounting holes to protect wires and cables. Replace if cracked, torn, or missing.

Hex screw for lawn mowers and outdoor power equipment. Replaces lost, stripped, or damaged hardware. Secures components and panels during assembly.

Hex screw fastener for securing lawn mower components. Replace if stripped, rusted, or missing to ensure proper assembly and equipment stability.

Loose bolts or nuts coming undone? This cotter pin locks axles, rods, and bolts in place. Simple fastener replacement prevents parts from shifting.

Compression spring that secures the mower deck to your lawn tractor. Replace if spring is degraded, stretched, broken, or no longer holding deck firmly.

Compression spring for snowblower mechanisms. Replaces worn, broken, or missing springs. Essential for proper tension and operation of controls.

Return spring for snow blowers. Mounts to the control mechanism to provide tension and return function. Replace if stretched, broken, or missing.

Cushioning bumper that installs on the snow blower handle lever assembly. Replace if your original bumper is cracked, broken, worn, or missing.

Flat bell washer for lawn mowers and garden equipment. Replaces worn, missing, or damaged washers. Inner diameter 0.40", outer diameter 0.88".

5/16 lock washer for lawn mowers and outdoor power equipment. Secures engine blocks, manifolds, and pulley shafts. Replace if cracked or missing.

Replacement washer for snow blower and snow thrower models. Needed when original washer is lost, damaged, or worn. Secures components properly.

Z-shaped cable fitting for tillers and snow blowers. Connects and guides control cables at the handlebar or engine. Replace if bent, cracked, or missing.

Replace a worn or bent cam rod that causes poor shifting or control issues in your snow blower. Direct fit part restores smooth operation.

Left handle bracket for gas snowblowers. Mounts to the frame to secure the left handlebar. Replace if cracked, bent, or broken from impact or wear.

Handle support bracket for snow blowers. Secures and stabilizes the upper handle assembly. Replace if bracket is bent, cracked, or broken.

Replace a cracked, broken, or missing handle bracket on your snow blower. This structural bracket secures the handle assembly to the frame. Easy install.

Carriage bolt for outdoor power equipment. Secures scraper blades, decks, and attachments. Replace if missing, stripped, or corroded during repair.

Hex washer screw for lawn mowers, tractors, and snow blowers. Replaces stripped, missing, or damaged screws on deck panels and housing assemblies.

Secures hardware, handles, and connections on lawn equipment. Replace if stripped, corroded, or missing. Standard hex nut for various outdoor models.

Secures components on mower engines, housings, and assemblies. Replace if stripped, damaged, or missing for proper fastening and equipment safety.

Replacement chute flange keeper for snow throwers. Secures the discharge chute assembly to the housing. Replace if broken, cracked, or missing.

Lower chute assembly for snow blowers. Directs snow discharge flow from the auger housing. Replace if cracked, broken, or missing for proper operation.

Cable guide for snowblowers. Keeps control cables properly routed and secured. Replace if cracked, broken, or missing to maintain smooth cable operation.

Upper discharge chute for snow blowers. Directs snow away from the machine. Replace if cracked, broken, or missing to restore proper snow discharge.

The replacement flat washer here is a part commonly found on many types of small engines, including those in lawn and garden equipment. The washer can be used on various parts of the engine depending on the make and model. The washer can help to spread the pressure of the connection over a wider surface area. This will help reduce damage to the machine at the connection point. The washers are made from metal and there may be a need to replace them. If they have become corroded, bent, or lost, they should be replaced right away. Owners should keep in mind what with some models, the washers will be secured with the use of a push pin. The push pins are sold separately. This is an authentic OEM replacement flat washer that is sold individually. The washer can be used on many types of equipment including lawn mowers, snowblowers, tillers, string trimmers, leaf blowers, edgers, log splitters, and wood chippers. Compatible brands include Craftsman, Cub Cadet, Ryobi, Troy-Bilt, Husky, Yard Machines, MTD, Huskee, Montgomery Wards, Bolens, Yard-Man, Turf King, and MasterCut.

Cable mounting bracket for snow throwers. Secures control cables in position. Replace if bent, cracked, or missing to properly route cables along frame.

Replacement wire harness for snow blowers. Connects electrical components throughout the unit. Replace if wiring is damaged, frayed, or corroded.

Hex head screw for lawn tractors and snow blowers. Secures various components and panels. Replace if missing, stripped, or damaged during maintenance.

Halogen headlight lamp for snow blowers. Replace when light dims or burns out to maintain visibility during winter clearing. Verify fit with model number.

Hex cap screw fastener for tillers and outdoor power equipment. Replaces worn, stripped, or missing hardware. Secures components and assemblies.

Replace worn spring bell washers causing loose parts or rattling noises. This conical washer cushions heavy loads in lawn equipment. Simple DIY fix.