Parts for Poulan PO475N21RA: Handle / Engine / Housing / Wheels Parts

The replacement handle bolt here can be used for lawn and garden equipment. The handle bolt is used with the handle knob to help secure the upper and lower handles of the machine together. If the bolt is damaged or missing, it will not be possible to secure the handles properly. The handle bolts are durable and made from metal, but they could become damaged due to corrosion or natural wear. In other cases, they could become lost. In either case, they will need to be replaced. The replacement is simple and will not require any tools, as the square part of the bolt will fit into the handle perfectly. The handle knob will then be used to keep it in place. The handle bolt is a genuine OEM Part for lawn mowers and snowblowers. It is compatible with some models from Husqvarna, Murray, Weed Eater, Poulan, Jonsered, Craftsman, and Ryobi. It should be noted that this product is sold individually, and the handle knob is not included.

This throttle control cable is an OEM part sourced directly from the manufacturer, and it is sold individually. It is manufactured by Husqvarna. This control cable is designed for use with lawnmowers. It is compatible with products from brands such as Craftsman, Husqvarna, Weed Eater, Poulan, and Ariens.The throttle control cable is used as a connector between the control bail and the carburetor. Over time, with regular wear and tear and exposure to the elements, throttle cables can break at the ends or become frayed and may need to be replaced. The replacement or repair process of the control cable is straight-foward, but the user replacing the part should always wear gloves during any assembly, replacement, or installation processes. The user should also refer to the owner's manual of their equipment and any guiding diagrams that clarify the placement location.

This genuine Husqvarna part is a hairpin cotter intended for use with Poulan, Husqvarna and Weed Eater brand walk-behind lawn mowers. This hairpin cotter, also known as a clip or hinchpin, is used to secure a component on a shaft in the lawn mower . This part is shaped like a bobby pin with a single piece of metal formed into a large ring at the top end, and a "W" shape at the other. This is designed to work with the groove or hole at the tip of a hitch pin, where this pin will lock larger pins in place. This part is an identical replacement for an original carrier bracket that is damaged, faulty, or missing. This dependable bracket carrier is made of high quality durable metal.This is an OEM replacement part sourced directly from the manufacturer and is sold individually. For installation information or hardware requirements, please refer to the original product manual. This part is a suitable replacement for a hairpin cotter in products from Husqvarna, Poulan, Weed Eater, Craftsman, Murray, Ariens, Ryobi, and other brands.

This replacement part is a spring. This is a genuine replacement part made by Husqvarna. Springs are small but very important in many different types of machines or appliances. Springs use force to allow the engine and other parts to operate smoothly during use.A new spring might be needed if the current one is missing or damaged in any way. This can include being bent or cracked. Due to the nature of the spring's job in the machine, they can become stretched, worn, or broken over time and tear and should be replaced. It is also normal for springs to snap under pressure from overuse at any point. Be sure to refer to the owner's manual before replacing this part. Work gloves are also recommended for this repair. This is a genuine OEM replacement part to ensure proper fit. This spring is sold individually and is sourced directly from the manufacturer.

This height adjuster knob is for lawn mowers. It attaches to the mower's height adjuster lever to adjust the lawn mower deck to the desired cutting height. Adjusting the lawn mower height ensures that the lawn is cut to the proper mowing height. The correct mowing height for a lawn depends on multiple factors, such as the type of grass species and the time of year. Height adjuster levers are typically made of metal, so the slightly rubberized height adjuster knob protects the operator during the adjustment process. The height adjuster knob's flat surface also prevents slippage during the adjustment process. The knob slides onto the lever and attaches without any clips, retainers, or screws. To remove the knob, pull it off. It might be challenging to remove. Due to the location of the height adjuster knob, wearing gloves is recommended when replacing the knob. This knob is an OEM part sourced directly from the manufacturer, and it is sold individually. It is compatible with lawn mowers made by Craftsman, Husqvarna, Weed Eater, Poulan, and Murray.

This flanged hex nut is used in various models of lawn and garden equipment. The nut is considered a standard hardware part that may have multiple applications on different units. It is typically used along with a bolt or screw to provide a secure hold for various components. This nut is a small part and can become lost in the process of other repairs. It can also break or strip the threads due to regular wear and tear, impact damage, or another issue. If this nut is broken or missing, it needs to be replaced immediately. Replacing the hex nut with a genuine OEM part will ensure equipment is always in proper working order. This OEM hex nut is designed for use in select Craftsman and Husqvarna equipment. It is manufactured by Husqvarna as an exact replacement for the original nuts that came with the machine. This part can fit on more than 150 machines, including lawn mowers, tractors, snow blowers, and trimmers from both brands. Owners will want to check their parts diagram for the exact location(s) and application(s) of this nut. Since it is standard hardware, some people purchase multiple quantities to keep extra parts on hand in case of emergency.

This replacement blade adapter is an authentic OEM part for a riding lawn mower. The blade adapter is located in the lower deck of a lawn mower and connects the blade to the motor shaft. As the shaft rotates, it spins the adapter, causing the blade to rotate and cut grass. The adapter locks into place so that it doesn't come flying off during operation. The adapter is made of durable steel so that it is not easily damaged, but if the blade strikes something quite hard, it can break the adapter, causing the blade to spin unevenly, or even bending the motor shaft. If left unattended to, it can be dangerous for the operator, as the blade could potentially break off from the mower. Replacing the adapter can be a little finicky, as they are generally quite tightly locked into place. There are special adapter keys that make it easier to remove, but the same effect can be achieved with a screwdriver or a pair of pliers. This part is compatible with riding lawn mowers made by Husqvarna and Craftsman. It comes sourced from the original manufacturer and ships individually.

This is a rear grass catcher frame that is used on a variety of lawnmowers. The grass catcher frame goes on the back of the lawnmower and is designed to offer support for the grass bag where the lawn clippings are held. Damage is the most common reason to replace the rear grass catcher frame. This can be caused by impact or wear and tear through regular use. If the frame becomes damaged, it will need to be replaced.When replacing the rear grass catcher frame, no tools are needed but work gloves may be useful. Take the lawnmower and put it on a level surface. It should be turned off with the spark plug wire disconnected. Take the grass bag off of the damaged frame before removing the original component. Place the grass bag on the new frame and install it onto the lawnmower.The rear grass catcher frame is designed to be compatible with lawnmowers made by Weed Eater, Poulan, Craftsman, and Husqvarna. It is sold as an individual component. This is an authentic OEM replacement part that is sourced directly from the manufacturer.