Parts for Ikea IHW57UC0FS0: Hood Parts

The Chimney is an OEM component specifically designed for Whirlpool downdraft ventilation hoods used above cooktop ranges. It vents fumes, steam, and smoke from the cooking surface up and out of the kitchen area.  

Symptoms of a bad chimney include grease caking and blocking proper airflow. Physical damage like dents could also disrupt venting performance.

Causes of a bad chimney can be long-term residue buildup from cooking emissions, as well as potential impact incidents diminishing vent structure integrity.

Causes of a bad chimney include:

• Reduced or inefficient venting of fumes from cooking  
• Greasy film forming on range backsplash/walls near the hood
• Physical blockages restricting maximum airflow
• Vent motor straining from obstruction resistance

Replacing with this authentic OEM chimney restores effective capture and removal of cooking byproducts. It keeps indoor air fresh for brands including KitchenAid, Jenn-Air and select Broan-Noren product lines.

This upper vent cover replaces the visible duct cover on a range hood to restore proper appearance and help channel exhaust air. It provides a finished look and protects ductwork from grease and debris. What it does:

• Covers the vent duct above the hood for a clean, finished appearance
• Helps direct exhaust up into the duct while protecting internal components from dust and grease
• Use when the original chimney is dented, cracked, or cosmetically damaged
• Reduces visible gaps between the hood and ceiling when properly installed

• Designed to mount to the hood body or chimney assembly; follow OEM mounting points
• May require removal of the hood's grease filters or upper panel for access
• Ensure power is off to the appliance before starting work to avoid electrical hazards
• Replace damaged ducting or fasteners as needed for a secure fit

This hood damper mounts at the exhaust outlet to let cooking air exit while blocking backdrafts when the fan is off. Replacing a worn damper restores proper airflow and helps eliminate rattling or sticking during vent operation.

• Controls one-way airflow from the hood into the duct; seals when the fan is off
• Helps block outside air and moisture from entering through the vent
• Wear or damage can cause poor venting, rattling noises, or a stuck exterior flap
• Restores vent performance after the original damper is bent, warped, or missing

• Disconnect power at the breaker before servicing
• Access the exhaust outlet and remove the old damper; note airflow orientation
• Install so the flap swings freely and seats closed; avoid overtightening fasteners
• Run the fan to verify smooth damper movement and proper airflow

This low-voltage control transformer supplies the control circuit with the correct voltage so your appliance's electronic controls and low-voltage components can operate reliably. Replaces a failed or intermittent transformer to restore control power. What it does:

• Converts line voltage to the low-voltage needed by the appliance control board and related components
• Restores power to control circuits when a burned or faulty transformer prevents operation
• Can resolve symptoms like unresponsive controls, non-working user interface, or intermittent/no power to low-voltage components
• Works as the power source for timers, relays and other low-voltage control devices

• Disconnect power to the appliance before inspecting or replacing the transformer
• Handle electrical connections carefully; secure wiring and mounting per OEM guidance

The Grease Filter is an OEM part for Whirlpool range hoods. This part traps grease particles from the air as it circulates through the range hood, preventing grease buildup on the blower and other internal components, thus maintaining the efficiency and longevity of the range hood.

Causes of a bad grease filter can include clogging from excessive grease accumulation, physical damage from improper cleaning or handling, and general wear and tear over time.

Symptoms of a bad grease filter include:

• Reduced air flow from the range hood
• Visible grease buildup on or around the filter
• Unusual odors persisting in the kitchen
• Filter appearing worn or damaged

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper and some Kenmore models.

This run capacitor helps the appliance's motor start and run smoothly by providing a phase-shifted electrical boost. Replacing a worn capacitor restores reliable motor operation and can stop start-up problems and irregular running. What it does:

• Provides the motor with the extra electrical charge needed for starting and stable operation
• Commonly linked to symptoms like hard-starting, a loud humming motor, or motors that won't start
• Stabilizes motor speed and reduces stress on the motor and start components
• Works as a direct replacement for the original capacitor specified for the motor circuit

• Disconnect power to the appliance before servicing to avoid shock hazard
• Discharge the capacitor before touching terminals; capacitors can hold a charge after power is removed
• Use insulated tools and avoid bridging terminals during handling

The Blower Fan is an OEM part for Whirlpool range hoods. It works to remove smoke, grease, odors, and other cooking byproducts from the air by induction. The high-powered centrifugal fan works together with the grease filter to deliver effective ventilation.

Causes can be normal wear and tear of moving parts over time, debris accumulation that prevents free rotation, or electrical failures in the motor or wiring.

Symptoms of a bad blower fan include:

• Reduced or ineffective airflow while the hood is in use
• Strange noises or vibrations coming from the fan housing area
• Failure of the fan to turn on or spin up to speed

This genuine OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

This chimney is the upper vent trim that covers and directs exhaust from the range hood or microwave vent, restoring a finished look and proper airflow management above your cooking surface. What it does:

• Covers and protects the vent duct and internal components above the hood or microwave
• Helps direct smoke, steam and cooking odors into the vent system
• Restores the unit's finished appearance when the original trim is dented, bent, or missing
• Provides a stable mounting surface for the upper portion of the vent assembly

• Always disconnect power to the appliance before beginning any repair
• Support the hood or microwave assembly while removing or installing this trim to avoid strain on fasteners
• Use the OEM diagram and hardware; some installations may require minor adjustments or drilling

This replacement hardware kit supplies the small fasteners and mounting pieces needed to secure appliance components so repairs stay stable and reliable. Ideal when original screws, clips or brackets are worn or missing. What it does:

• Replaces worn or missing fasteners that hold panels, trims or components in place
• Restores secure connections to reduce rattles and loose parts
• Helps maintain proper alignment of attached parts after repair
• Suitable for use where the OEM lists a "hardware" kit

• Turn off power and disconnect the appliance before starting any repair
• Use the correct fastener for each location; do not force or overtighten
• Keep small parts away from children and pets

A duct kit designed to route a dryer's exhaust safely to the household vent system, restoring proper airflow and helping the dryer vent effectively when the original ducting is damaged or missing. What it does:

• Channels hot, lint-laden exhaust from the dryer to the exterior vent to reduce indoor heat and moisture.
• Replaces crushed, torn or disconnected ducting that can cause poor drying performance.
• Use when you notice longer dry times, excess heat or lint buildup near the dryer, or backdrafting from the vent.
• Helps maintain proper vent airflow when installed and secured per manufacturer and local code requirements.

• Disconnect electrical power (and gas supply for gas dryers) before installing or servicing venting components.
• Follow the appliance manufacturer's installation instructions and local building/venting codes for diameter, length and material.
• Avoid crushing, kinking or sharp bends in the duct; secure joints with approved clamps or foil tape and check for leaks.

This filter traps cooking grease and airborne particles as air moves through your appliance's ventilation system. It helps protect the blower and internal surfaces and supports proper airflow for effective venting during everyday cooking.

• Captures grease and debris from cooking vapors to reduce buildup on internal components
• Helps maintain ventilation airflow and fan performance
• Replace if the mesh is torn, warped, heavily clogged, or no longer stays seated
• Common symptoms include reduced airflow, lingering smoke or odors, and visible grease accumulation

• Disconnect power and allow surfaces to cool before servicing
• Access the filter from the underside of the hood or over-the-range unit
• Release retaining tabs or screws, remove the old filter, and slide the new filter into place
• Ensure the filter is fully seated and secured before restoring power