Parts for Ikea IXL5430DS2: Hood Parts

This hood damper mounts at the exhaust outlet to let cooking air exit while blocking backdrafts when the fan is off. Replacing a worn damper restores proper airflow and helps eliminate rattling or sticking during vent operation.

• Controls one-way airflow from the hood into the duct; seals when the fan is off
• Helps block outside air and moisture from entering through the vent
• Wear or damage can cause poor venting, rattling noises, or a stuck exterior flap
• Restores vent performance after the original damper is bent, warped, or missing

• Disconnect power at the breaker before servicing
• Access the exhaust outlet and remove the old damper; note airflow orientation
• Install so the flap swings freely and seats closed; avoid overtightening fasteners
• Run the fan to verify smooth damper movement and proper airflow

The Push Button Switch is an OEM part for Whirlpool range hoods. As an electronic component located on the control panel, it allows activation of the ventilation fan and light functions. 

Symptoms of a bad push button switch include:

• Failure to turn the fan or lights on when pressed
• Non-responsive or stuck buttons  
• Flickering or buzzing from the control area

Causes can be normal wear over time, moisture damage, or breakage from accidental impact. This OEM replacement restores full functionality to the control panel. 

This OEM replacement is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore brands. 

This blower fan is the rotating assembly that moves air through the dryer to help circulate heat and remove moisture for faster, more even drying. It replaces a worn or damaged blower to restore airflow and drying performance. What it does:

• Spins to pull hot air through the drum and vent for proper drying and moisture removal
• Helps maintain consistent temperature and prevents overheating from restricted airflow
• Commonly linked to weak airflow, longer dry times, or unusual blower noise
• Works with the dryer's motor and housing to direct exhaust air out of the cabinet

• One blower fan

• Disconnect power (and gas supply if applicable) before servicing to prevent shock or injury
• Inspect the housing, motor, and vent path for obstructions or damage while replacing the blower
• Some models require removing the dryer front or cabinet; follow the OEM service manual for step-by-step guidance
• If you notice excessive vibration or noise after install, verify correct seating and any fasteners are tightened

This run capacitor helps the appliance's motor start and run smoothly by providing a phase-shifted electrical boost. Replacing a worn capacitor restores reliable motor operation and can stop start-up problems and irregular running. What it does:

• Provides the motor with the extra electrical charge needed for starting and stable operation
• Commonly linked to symptoms like hard-starting, a loud humming motor, or motors that won't start
• Stabilizes motor speed and reduces stress on the motor and start components
• Works as a direct replacement for the original capacitor specified for the motor circuit

• Disconnect power to the appliance before servicing to avoid shock hazard
• Discharge the capacitor before touching terminals; capacitors can hold a charge after power is removed
• Use insulated tools and avoid bridging terminals during handling

This replacement light support holds the refrigerator cabinet light or lens assembly in place, restoring a secure fit and proper beam alignment so the interior light stays positioned and stable. What it does

• Secures the light housing or lens to the refrigerator cabinet
• Prevents the light or lens from rattling or shifting during door movement
• Restores proper alignment so the bulb and lens illuminate the interior correctly
• Replaces cracked, broken, or worn mounting points that let the light hang loose

• One light support

• Disconnect power or unplug the appliance before starting work
• Remove bulb and lens cover per your model's service instructions to access the support
• Use basic hand tools; handle bulb and lens carefully to avoid damage
• If mounting tabs are damaged, inspect surrounding trim for additional breakage before finishing

This is a replacement electrical socket used to reconnect wiring to an appliance component, restoring a secure, insulated connection and reliable electrical contact. It's a like-for-like connector designed for direct replacement of a damaged or worn socket. What it does:

• Provides a secure electrical connection between wiring and a component to restore power or signal flow
• Replaces cracked, melted, loose, or corroded sockets that cause intermittent operation or failure
• Helps prevent short circuits and arcing by restoring proper insulation and fit
• Fits into the existing wiring harness or component receptacle to restore OEM-style connections

• One replacement electrical socket

• Disconnect power (unplug or shut off circuit breaker) before beginning any repair
• Inspect mating terminals, harness, and surrounding insulation; replace damaged wiring or terminals as needed
• Ensure correct orientation and full seating of the socket; confirm secure wire crimps or fasteners

Bulb only - Socket must be ordered separately

This refrigerator water filter cartridge reduces sediment and improves the taste and odor of drinking water and ice from compatible Whirlpool refrigerators. It provides a straightforward replacement to restore filtered water performance. What it does:

• Filters particulates and common taste/odor contaminants to improve water and ice quality
• Helps reduce visible sediment and chlorine-like tastes that affect drinking water
• Restores proper flow and filtration when an old or clogged filter is replaced
• Matches the OEM form for a direct replacement in specified refrigerator filter housings

• One replacement refrigerator water filter cartridge

• Replace according to the refrigerator manufacturer's instructions; typically twist or push into the filter housing until seated
• Run and discard the recommended amount of water after installation to purge air and activate the filter
• Use only the exact replacement to ensure proper fit and avoid leaks
• If you smell or taste filter media after installation, flush additional water; stop use and consult manufacturer guidance if issues persist

This replacement grease filter captures airborne grease and cooking residue in your appliance's venting system, helping protect the blower and ductwork while maintaining effective ventilation and airflow.

• Traps grease and food particles carried by the exhaust airstream
• Helps sustain proper airflow and reduce smoke and lingering odors
• Replace if mesh is torn, warped, missing, or remains clogged after cleaning
• Common symptoms include persistent smoke/odors, visible grease buildup, or a loose/rattling filter

• Disconnect power before servicing and allow the appliance to cool completely
• Open the filter access, release the retaining latch or screws, and remove the old filter
• Slide the new filter into place, matching the original orientation/tabs
• Ensure the filter is fully seated and secured; do not operate the unit without a filter