Parts for Kitchenaid KFP0718CU0: Housing Unit Parts

The Pusher is an OEM part for Whirlpool refrigerators. This part helps guide and dispense ice from the icemaker into the ice bucket, ensuring smooth and consistent ice dispensing.

Causes of a bad pusher can include regular wear and tear, accidental damage from handling or cleaning, and buildup of ice or debris interfering with its movement.

Symptoms of a bad pusher include:

• Ice not dispensing properly
• Ice jams in the chute
• Unusual noises when dispensing ice
• Inconsistent or no ice output

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper and some Kenmore models.

The Food Processor Bowl Cover is an OEM replacement part specific to Whirlpool brand food processors. As a key accessory, it is designed to fit securely onto the stainless steel bowl allowing contents to be mixed, chopped, or pureed.

Causes of a bad cover can include cracks, chips, or breaks that compromise its air-tight seal over time. Discoloration from cleaning chemicals can also potentially affect its transparency.

Symptoms of a bad cover include:

• Inability to attach properly over the bowl for processing
• Leaks that allow ingredients to splash out
• Reduced visibility of contents while mixing or blending

Compatible appliance models also include some Cuisinart, Breville, and KitchenAid branded food processors that utilize Whirlpool design technology.

This replacement bowl is the original container that seats on the appliance base/support to hold contents securely during operation. Replace a cracked or worn bowl to restore a proper fit, prevent messes, and keep performance consistent. What it does:

• Provides a secure vessel to contain contents during operation
• Seats/locks into the base or support for stable use
• Helps prevent spills and splashes when intact and properly fitted
• Common symptoms: cracks, chips, leaks, warped rim, loose fit, or broken tabs/handle

• 1 bowl

• Disconnect power and allow the appliance to cool before servicing
• Remove any attachments or fasteners; lift out the old bowl carefully
• Align and fully seat the new bowl, ensuring tabs/locks engage correctly
• Test fit and operation per your model's instructions

This adapter is the interface piece that joins two mating components inside your appliance, ensuring a secure fit and proper alignment. Replacing a worn or damaged adapter restores stable connections and helps maintain reliable operation.

• Provides the correct connection point between components
• Maintains alignment and spacing to prevent wobble or misfit
• Helps ensure parts engage and stay secured during use
• Common signs of failure: loose or unstable connection, parts not engaging, new rattling/vibration from the area

• Disconnect power to the appliance; turn off water supply if the repair involves water connections
• Note the original orientation and seating before removal
• Transfer any clips, seals, or spacers from the old adapter if applicable
• Start threads/couplings by hand to avoid cross-threading; do not overtighten

This replacement cutting blade restores the appliance's slicing/chopping action so food is processed cleanly and consistently. Use it to replace a worn, chipped, or damaged blade to improve performance and reduce uneven cutting. What it does:

• Replaces the appliance's primary cutting element used to chop, slice or blend food
• Restores clean, consistent cutting performance when original blade is dull or damaged
• Helps reduce large pieces or uneven cuts that can cause poor results or jams
• Works as a direct component swap when the original blade is broken or bent

• Disconnect power and remove any food or liquids before servicing.
• Handle the blade carefully — edges are sharp; wear cut-resistant gloves.
• Only install on compatible appliance models and follow the manufacturer's reassembly steps.

This is the dishwasher chopper blade that shreds and helps circulate food particles so they can be flushed from the wash water. A sharp, intact blade supports proper cleaning and reduces redepositing of debris on dishes.

• Cuts food debris in the sump to prevent clogs and improve water circulation
• Dull, broken, or missing blade can lead to poor cleaning, gritty residue, or drain errors
• Help if you hear grinding from the sump area or find unchopped debris after cycles

• Disconnect power and shut off water supply before servicing
• Access is through the sump area; remove lower rack and spray arm as needed
• Inspect the chopper screen and impeller while open; replace any damaged parts
• Ensure the blade seats correctly and rotates freely before reassembly

This shredding disc fits the dishwasher chopper/grinder assembly and breaks up food particles so they pass into the drain rather than clogging the sump. It restores proper food grinding for cleaner draining and fewer blockages. What it does:

• Rotates in the chopper assembly to chop and shred food debris before it enters the drain
• Helps prevent food buildup that can cause slow draining or odors
• Replace if cracked, warped, or worn to restore normal grinding performance
• Commonly replaced when the chopper makes grinding noises or stops effectively breaking down food

• One disc-shred (shredding disc) as shown

• Disconnect power to the appliance and turn off water supply before servicing
• Remove the sump/chopper housing to access the shredding disc; keep parts organized for reassembly
• Inspect surrounding chopper components and seals; replace any damaged parts to ensure a proper seal