Parts for Husqvarna RZ5424/966659301: Ignition Parts

This large fuel tank assembly is a genuine Husqvarna part. This fuel tank is made from plastic. It is normal for a plastic fuel tank to experience wear and tear and eventually break down and need to be replaced, particularly if the machine is used commercially or frequently.This fuel tank assembly is a genuine OEM sourced part from the manufacturer. To replace the fuel tank, simply remove the old fuel tank and replace it with the new one. Be sure that the old fuel tank is complete empty and cleaned before disposing of it.This fuel tank assembly is designed for compatibility with several Husqvarna zero turn tractors, several Husqvarna lawn mowers, several Husqvarna zero turn consumers, and Husqvarna ride on mower model number RZ4623. It is also compatible with Craftsman lawn tractor model numbers 917204130 and 917204140. It may also work with products manufactured by AYP, McCulloch, RedMax, Poulan/Poulan Pro, Weed Eater, and Jonsered.

This is a replacement wiring harness that can work with a range of lawn tractors and mowers. The wiring harness features organized wires, terminals, and connectors that run throughout the mower to relay information and electrical power. It connects the components of the machine. If an owner notices that there are problems with the electrical features of the mower, it could be the wiring. A new harness might be needed.The wiring harness should last for a long time, but many potential problems could arise. The sheathing could start to wear out, exposing wires. Some of the wires could be damaged or cut, and some of the plastic components could break and no longer connect properly. Check their harness and replace it if needed.This wiring harness is compatible with many models of machines from Husqvarna and Poulan. The harness is sold individually. This is a genuine OEM replacement part that has been sourced directly from the manufacturer.

This throttle cable is a genuine Husqvarna part. It is manufactured as a replacement part for riding mowers, zero-turn mowers, and tractors. The throttle cable connects to the carburetor. Its purpose is to stop the engine when the user shifts the lever to the choke position. It is normal for the throttle cable to wear over time and need to be replaced, especially with heavy use. If the throttle cable is worn, the mower will operate at too high a speed.This is a relatively simple repair to make. Besides safety equipment, only a pair of pliers are required. Please note that this part is sold individually and is not sold with the housing or hardware, which may need to be purchased additionally.This throttle cable is a genuine OEM part sourced directly from the manufacturer. It is compatible with machines manufactured by Poulan, Husqvarna, and Jonsered.

This ignition switch is a genuine Husqvarna replacement part for lawn tractors and lawn mowers. The function of an ignition switch is to allows a user to easily start the mower with a simple turn of a key. A lawn mower or lawn tractor ignition switch might have to be replaced if there is damage to the part that strips it out, such that a key cannot properly fit into it and start the engine. If the ignition switch is damaged to the point of warping, it must be removed and replaced immediately, as a lawn mower or lawn tractor cannot be used without an ignition switch. Remember to always wear gloves when handling, repairing, and operating outdoor equipment. This ignition switch is compatible with the following brands: Husqvarna, Poulan, Weed Eater, and Craftsman. This part sold individually.

This interlock switch is a genuine Husqvarna part, sold individually. This interlock switch can be used as a replacement part for outdoor appliances with small engines such as a lawnmower or lawn tractor. The purpose of an interlock switch is to make sure that the engine of the appliance will not start unless the brake is pressed. The primary symptom of a damaged interlock switch is an engine that turns on even when the foot is not actively pressing down on the brake. This is a simple repair process that will only require a wrench set to conduct. Remember to wear work gloves as a safety precaution while repairing or replacing parts within an outdoor appliance. This is an OEM part sourced directly from the manufacturer. It is sold individually. This interlock switch is compatible with the following outdoor appliance brands: Husqvarna, Poulan, and Craftsman.

This is a replacement fuel check valve. This is a genuine OEM part made by Husqvarna and has been sourced directly from the manufacturer. This part is intended to replace a broken or faulty fuel check valve on various lawnmower models.The fuel check valve can be found in-between the grommet check valve and the hose clamp. This part prevents fuel from flowing back into the tank once the engine has been powered off. It is always recommended that the appropriate safety precautions are adhered to when attempting to fix any power tools or machinery. Proper tools may be required to replace this part, including a socket set and pliers. When working on or near an engine, ensure the equipment is powered off and completely cooled down before starting any repairs. For more accurate information on how and where to install this fuel check valve, reference the appropriate owner's manual and included diagrams.As an authentic replacement part, this fuel check valve is suitable for use on several different lawnmower models manufactured by Husqvarna, Jonsered and Poulan. This is a genuine part made of high-quality, durable materials and is sold individually.

This fuel valve is a genuine Husqvarna part, sold individually. This fuel valve can be used as a replacement part in a lawn mower. The purpose of the fuel valve in a lawn mower is to allow the intake and the shutting off of fuel feeding into the carburetor of the appliance so that it can be mixed with air in the proper ratio to ignite the spark plugs and power on the engine.The fuel valve in a lawn mower might have to be replaced if the component can no longer regulate the fuel intake and shut off. If fuel is frequently leaking from the area of the fuel valve, if fuel is not being properly channeled into the appliance, or if fuel cannot enter the appliance at all, the fuel valve should be assessed and inspected for potential damage, and if there is sufficient damage, the fuel valve should be removed and replaced by this genuine OEM replacement part.This is a genuine OEM replacement directly from the manufacturer. It is sold individually. This fuel valve is compatible with the following outdoor appliance brands: Husqvarna.

This fuel check valve grommet is a genuine Husqvarna part, sold individually. This fuel check valve grommet can be used as a replacement part in a lawn mower. The purpose of the fuel check valve grommet in a lawn mower is to affix the connect valve to the fuel tank so that the fuel can pass through these components properly without leaking or being directed elsewhere.The fuel check valve grommet might have to be replaced if it cannot properly direct fuel into the fuel tank. The fuel check valve grommet could suffer damage in the form of tearing, ripping, puncturing, eroding, or warping; if this occurs to the point that fuel is leaking out of the grommet or that fuel is not making its way to the fuel tank through the grommet, the component should be removed and replaced by this genuine OEM replacement part. Remember to always wear gloves when handling, repairing, and operating outdoor equipment. Always unplug the appliance before performing any kind of repair or replacement. This OEM part is a genuine replacement that is sold individually and sourced directly from the manufacturer. This fuel check valve grommet is compatible with the following outdoor appliance brands: Husqvarna and Craftsman.

This part is a replacement control knob. This is a genuine OEM part made by Husqvarna and has been sourced directly from the manufacturer. This part can be used to replace a broken, defective, or misplaced throttle control knob on lawn tractors.This control knob is specifically for the throttle and enables the user to easily adjust the throttle control lever. This knob may easily become detached and lost, necessitating replacement. It's important when working on or near an engine to make sure the equipment is powered off and completely cooled down before starting any repairs. For more accurate information on how and where to install this throttle control know, the appropriate owner's manual and equipment diagrams should be utilized.As an authentic replacement part, this control knob is suitable for use on several models of lawn tractors manufactured by Husqvarna, Poulan, and other brands. This is a genuine part made of high-quality, durable materials and is sold individually.

This genuine replacement Husqvarna carriage bolt can be used in the infrastructure of several different kinds of appliances that require small engines, including lawn mowers, leaf blowers, lawn tractors, line trimmers, snowblowers, wood-chippers, and generators. Carriage bolts are distinguished by their round heads and flat tips. Their function as a fastener, in conjunction with nuts, is to attach materials or components to one another, wood and metal components in particular. There are several reasons that a carriage bolt might have to be replaced, including misplacement of a carriage bolt, as the part is relatively small and can disappear without immediate consequence. Other reasons to replace a carriage bolt can include damage from overuse, exposure, or age; this damage can manifest in the form of visible erosion, cracking, or piercing that prevents the carriage bolt from properly fastening materials to one another. Remember to always wear gloves when handling, repairing, and operating outdoor equipment. This carriage bolt is compatible with the following brands: Husqvarna, Poulan, and Craftsman. Part sold individually.

This nut is a genuine Husqvarna part, sold individually. This nut can be used as a replacement part in a lawn mower. The purpose of the nut in a lawn mower is to serve as a fastening component within the internal mechanisms of the appliance, in conjunction with a bolt, to keep one or more components in their stable placement.The nut in a lawn mower might be subject to damage during the typical lifespan of the appliance that could render the nut beyond functionality. The nut can also be easily lost or misplaced during the lifespan of the appliance as it is a small component that can disappear without necessarily notifying the user of the appliance of its absence. If the nut is lost, misplaced, or sufficiently damaged to the point of reduced or no functionality, the nut should be replaced by this genuine OEM replacement part. Always unplug the appliance before performing any kind of repair or replacement.Sourced directly from the manufacturer, this component is a genuine replacement part that is sold individually. This nut is compatible with products from Husqvarna.

This replacement part is a flange nut. It is a genuine replacement part made by Husqvarna. This part is small yet extremely important to the operation of many different appliances and machines. Nuts are able to hold other parts in place and secure them tightly so that everything can operate smoothly and efficiently. A new flange nut might be needed if the current ones are damaged in any way or even missing. This repair should be fairly easy and only require a screwdriver or pliers if the previous part is lodged in place. It is possible that nuts can become stripped or stuck over time and should be replaced when and if this occurs. Be sure the engine is completely powered down before starting a repair. This part is sold individually and is a genuine OEM replacement part sourced directly from the manufacturer.