Parts for Maytag MZF34X16DW08: Liner Parts

The Thermistor is an OEM part for Whirlpool refrigerators. It is responsible for monitoring and regulating the refrigerator's temperature by sending temperature readings to the control board, which adjusts the cooling system accordingly. This ensures that the refrigerator maintains a consistent and optimal temperature for food preservation.

You should replace this thermistor if it becomes faulty. Causes of a bad thermistor can include electrical failures, physical damage, or wear and tear over time.

Symptoms of a bad Thermistor include:

• Inconsistent or incorrect temperatures in the refrigerator
• The refrigerator running continuously or not running enough
• Frost buildup or inadequate cooling

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

This replacement control switch completes the appliance's electrical circuit so controls and functions respond correctly. It restores user input and on/off signaling for reliable operation of the affected control or latch assembly. What it does:

• Acts as the electrical contact that opens or closes a control circuit when pressed or actuated
• Restores control-panel or door/lid signaling so cycles can start and stop as intended
• Common symptom fixes: appliance won't start, intermittent or no response from a button or control, or a stuck/non-responsive switch
• Fits into the original switch housing and mates with factory wiring harnesses when the correct part is used

• One replacement control switch

• Disconnect power (unplug or switch off breaker) before attempting replacement
• Handle electrical connectors gently and avoid forcing terminals; replace any damaged wiring or connectors

The Light Bulb is an OEM part for Whirlpool refrigerators. As the interior light source, this bulb illuminates the refrigerator compartment, making it easy to find frozen foods. The bulb is designed to cast light efficiently while operating safely at low temperatures.

Causes of a bad light bulb include natural burnout over time or intermittent operation.

Symptoms of a bad light bulb include:

• The light no longer turns on
• The bulb is dimmer than normal
• The bulb fuse has blown

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper and some Kenmore models.

This replacement door gasket creates an airtight seal for the refrigerator fresh-food compartment to help maintain proper cooling and reduce frost buildup. It restores door sealing to help the appliance run more efficiently. What it does

• Seals the fresh-food compartment door to keep cold air in and warm air out
• Helps reduce frost and moisture buildup inside the compartment
• Supports consistent internal temperature for safer food storage
• Can improve energy efficiency when the door seal is compromised

• Disconnect power to the appliance before starting any repair.
• Remove the old gasket per the manufacturer's instructions; inspect the door surface for damage or debris.
• Warm and flex the new gasket as needed to ease installation; ensure the gasket is seated evenly in the door channel.
• After installation, check the door for a secure, even seal; adjust alignment if necessary.

This replacement door gasket creates an airtight seal for the refrigerator fresh-food compartment to help maintain proper cooling and reduce frost buildup. It restores door sealing to help the appliance run more efficiently. What it does

• Seals the fresh-food compartment door to keep cold air in and warm air out
• Helps reduce frost and moisture buildup inside the compartment
• Supports consistent internal temperature for safer food storage
• Can improve energy efficiency when the door seal is compromised

• Disconnect power to the appliance before starting any repair.
• Remove the old gasket per the manufacturer's instructions; inspect the door surface for damage or debris.
• Warm and flex the new gasket as needed to ease installation; ensure the gasket is seated evenly in the door channel.
• After installation, check the door for a secure, even seal; adjust alignment if necessary.

This replacement wire shelf restores sturdy, organized storage inside your refrigerator or freezer. Its open-grid design supports food items while helping cold air circulate for even cooling and efficient use of space.

• Provides a level surface to hold packages and containers
• Open-wire construction promotes proper airflow through the compartment
• Direct replacement for a bent, broken, rusted, or missing shelf
• Helps recover lost storage space and improve organization

• Unplug the appliance and remove items from the compartment
• Align the shelf with the existing side rails or locator slots
• Slide into place and ensure it is fully seated and level
• Wear gloves to protect hands from sharp edges

This replacement wire shelf restores stable, usable storage space in your refrigerator or freezer. Swap out a bent, rusted, or missing shelf to keep items level and organized while maintaining proper airflow through the compartment. What it does:

• Creates a sturdy, ventilated surface for food storage
• Mounts on factory rails or pegs to stay level and secure
• Helps maintain airflow for even cooling around stored items
• Common fixes: broken/bent wires, flaking/rusted coating, shelf won't sit level, missing shelf

• 1 wire shelf

• Remove food items; lift out the old shelf from its rails or notches
• Align the new shelf with supports; tilt and slide into place until fully seated
• Confirm it sits level and secure before reloading items
• Avoid overloading; follow weight guidance in your appliance manual

This outer decorative door trim restores the finished edge and appearance of a refrigerator/freezer door, covering gaps and protecting the door edge from damage. It helps maintain a clean, sealed look and improves door aesthetics. What it does:

• Replaces damaged, cracked, or missing outer door trim for a finished appearance
• Covers and protects the door edge from nicks and wear
• Helps keep the door gasket sitting properly at the edge to reduce visible gaps
• Commonly needed when trim is broken, warped, or cosmetically worn

• Disconnect power to the appliance before beginning any repair to avoid injury.
• Installation typically requires removing the door or inner components; keep fasteners and parts organized.
• Use gentle prying to release clips or trim retainer; avoid forcing to prevent damage to surrounding surfaces.