Parts for Whirlpool WSR57R18DM02: Liner Parts

The Control Box is an OEM part for Whirlpool refrigerators. It houses the electronic components responsible for operating all refrigerator functions, from cooling cycles and temperature regulation to light controls, alerts, and more. 

Symptoms of a bad control box include:

• Lights or compartments failing to operate correctly
• Inability to adjust temperature settings properly  
• Error codes or troubleshooting lights appearing
• Refrigerator not maintaining a cold environment

Causes can include damage from spilled liquids, power surges, or simple component failure due to years of operation.

This quality OEM Whirlpool control box replacement ensures smooth and dependable performance from your refrigerator. Properly functioning controls are crucial for prolonged use. This OEM part is also compatible with Maytag, Roper, Amana, Jenn-Air, and select Kenmore models.
 

The Thermistor is an OEM part for Whirlpool refrigerators. It is responsible for monitoring and regulating the refrigerator's temperature by sending temperature readings to the control board, which adjusts the cooling system accordingly. This ensures that the refrigerator maintains a consistent and optimal temperature for food preservation.

You should replace this thermistor if it becomes faulty. Causes of a bad thermistor can include electrical failures, physical damage, or wear and tear over time.

Symptoms of a bad Thermistor include:

• Inconsistent or incorrect temperatures in the refrigerator
• The refrigerator running continuously or not running enough
• Frost buildup or inadequate cooling

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

This air tower channels cold air from the evaporator to the refrigerator compartments to help maintain even cooling and airflow. Replaces a damaged or cracked duct to restore proper air distribution. What it does:

• Directs refrigerated air through the cabinet so compartments reach intended temperatures
• Restores proper airflow when the original duct is cracked, broken, or misaligned
• Helps reduce hot or uneven spots caused by disrupted air pathways
• Works with the evaporator and blower to route conditioned air where needed

• One air tower (air duct) as pictured

• Disconnect power to the appliance before starting any repair
• Handle the plastic housing carefully to avoid breaking mounting tabs
• Align and snap or fasten the tower into existing cabinet mounting points; basic hand tools may be needed

The Bulb-Light is an OEM part for Whirlpool refrigerators. This bulb is designed to illuminate the interior of your refrigerator, making it easier to see and organize the contents. 

Symptoms of a failing refrigerator light bulb include:

• Dimming or flickering of the light
• Light not turning on when the refrigerator door is opened
• Inconsistent performance, with the light turning on and off intermittently

Causes of light bulb failure in refrigerators generally involve the bulb reaching the end of its useful life, loose connections in the light socket, or issues with the refrigerator’s door switch that controls the light.

This OEM part is also compatible with other Whirlpool brand appliances, such as Maytag, KitchenAid, Jenn-Air, Amana, and others.

This replacement lens is the clear plastic cover that protects a control panel display or indicator light and helps keep the area visible and clean. It restores the original appearance and shields internal components from dust and damage. What it does:

• Covers and protects the control panel display or indicator light from dirt, spills, and impact
• Helps maintain visibility of panel icons and indicator lights
• Prevents direct contact with bulbs or electronic components behind the panel
• Addresses symptoms such as cracked, scratched, discolored, loose, or missing lens covers

• One lens cover

• Disconnect power to the appliance before beginning any repair
• Typically installs with snap clips or screws; access may require removing a trim piece or control panel
• Handle the lens carefully to avoid scratches during installation

Restore a sturdy, level storage surface with this refrigerator glass shelf. It replaces cracked, chipped, or missing shelf glass so you can organize food confidently and maintain a clean, usable interior.

• Provides a flat storage surface inside the refrigerator compartment
• Replaces cracked, chipped, shattered, or missing shelf glass
• Helps items sit level and supported to reduce tipping
• If the shelf no longer seats properly in its frame/rails, replacing the glass can resolve it

• Unplug the refrigerator or switch off power before working inside
• Remove food items and slide out the shelf or shelf frame as needed
• Wear cut-resistant gloves and handle the glass with both hands
• Ensure the glass is fully seated in the existing frame/rails before loading items

This shelf cant is the replacement cantilever-style bracket that supports and secures an adjustable refrigerator shelf, restoring proper shelf alignment and load-bearing support. Fits where a broken or worn bracket lets shelves tilt or slip. What it does:

• Replaces a damaged cantilever bracket to stabilize adjustable shelves
• Keeps shelves level so food and containers sit securely
• Prevents shelves from slipping forward or dropping under weight
• Helps restore proper shelf engagement with cabinet rails

• Install by removing the impacted shelf, aligning the bracket into the rail slots, and snapping or securing per the cabinet design
• Use basic hand tools; do not force parts—ensure rails and clips are undamaged before installing
• Disconnect power only if working near electrical components; otherwise power disconnection is not typically required

This crisper pan is the removable drawer that sits in the refrigerator's lower compartment to hold and organize fresh produce. Replace a cracked, warped, or damaged crisper pan to restore a stable storage surface and prevent spills. What it does:

• Serves as the removable drawer that holds fruits and vegetables and keeps them contained.
• Provides a flat support for the crisper cover/drawer assembly to slide on.
• A damaged or cracked pan can cause sticking, improper drawer alignment, or leaks into the lower cabinet.
• Visible cracks, sagging, or pieces missing are common signs the pan needs replacement.

• Remove all contents from the drawer before replacing the pan.
• In most models the pan simply slides in and out on tracks—no tools required for basic replacement.
• Inspect drawer rails and supports for damage when replacing the pan; damaged rails may need separate service.

This replacement door gasket creates an airtight seal for the refrigerator fresh-food compartment to help maintain proper cooling and reduce frost buildup. It restores door sealing to help the appliance run more efficiently. What it does

• Seals the fresh-food compartment door to keep cold air in and warm air out
• Helps reduce frost and moisture buildup inside the compartment
• Supports consistent internal temperature for safer food storage
• Can improve energy efficiency when the door seal is compromised

• Disconnect power to the appliance before starting any repair.
• Remove the old gasket per the manufacturer's instructions; inspect the door surface for damage or debris.
• Warm and flex the new gasket as needed to ease installation; ensure the gasket is seated evenly in the door channel.
• After installation, check the door for a secure, even seal; adjust alignment if necessary.

This replacement door gasket creates an airtight seal for the refrigerator fresh-food compartment to help maintain proper cooling and reduce frost buildup. It restores door sealing to help the appliance run more efficiently. What it does

• Seals the fresh-food compartment door to keep cold air in and warm air out
• Helps reduce frost and moisture buildup inside the compartment
• Supports consistent internal temperature for safer food storage
• Can improve energy efficiency when the door seal is compromised

• Disconnect power to the appliance before starting any repair.
• Remove the old gasket per the manufacturer's instructions; inspect the door surface for damage or debris.
• Warm and flex the new gasket as needed to ease installation; ensure the gasket is seated evenly in the door channel.
• After installation, check the door for a secure, even seal; adjust alignment if necessary.

This crisper pan replaces the plastic pan that supports and contains the refrigerator crisper drawer, helping keep produce organized and containing spills for easier clean-up. Fits into the lower fresh-food compartment crisper area. What it does:

• Supports the crisper drawer so fruits and vegetables slide smoothly and stay level
• Contains leaks or spills from stored produce to protect the cabinet below
• Restores proper spacing and alignment for the crisper drawer to operate correctly
• Helps maintain an organized storage area for fresh produce

• One crisper pan

• Remove all food and the crisper drawer before installing the pan
• Slide the pan into the crisper cavity until it rests securely on the supports
• Inspect support rails and guides for damage; replace if worn to ensure proper fit
• Handle carefully to avoid cracking plastic; use gloves if needed and clean before returning food

Tempered glass shelf that replaces a broken, chipped, or missing refrigerator shelf to restore a flat, easy-to-clean surface for storing and organizing food, containers and beverages. What it does:

• Provides a stable, level surface for food storage and organization.
• Replaces cracked, chipped or missing shelves to restore usable storage space.
• Fits into existing shelf supports or rails for secure placement.
• Tempered safety glass offers durable everyday use and safer breakage behavior than annealed glass.

• Remove food and containers before installing; have a second person assist if needed.
• Handle with care and wear gloves—edges can be sharp if damaged.
• Slide shelf into the existing rails or supports until fully seated and level before loading.
• If the shelf does not seat properly, stop and verify the part number and shelf support condition.