Parts for Whirlpool WZF34X20DW01: Liner Parts

The Freezer Control Box is an OEM part for Whirlpool freezers. It houses electronic components that manage temperature, defrost cycles, fan operation, and power distribution. The control box helps monitor and maintain freezing conditions.

Symptoms of a faulty control box may include:

• Inaccurate or faulty temperature readings  
• Failure to initiate automatic defrost cycles
• Loud buzzing noises coming from the control area
• Lights or fans not working properly

Causes can be related to moisture damage, cracks in seals, or wear of electronic parts over many years of use. Accidental impacts may also compromise the control box integrity.

This OEM replacement part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore freezers.

The Thermistor is an OEM part for Whirlpool refrigerators. It is responsible for monitoring and regulating the refrigerator's temperature by sending temperature readings to the control board, which adjusts the cooling system accordingly. This ensures that the refrigerator maintains a consistent and optimal temperature for food preservation.

You should replace this thermistor if it becomes faulty. Causes of a bad thermistor can include electrical failures, physical damage, or wear and tear over time.

Symptoms of a bad Thermistor include:

• Inconsistent or incorrect temperatures in the refrigerator
• The refrigerator running continuously or not running enough
• Frost buildup or inadequate cooling

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

This air tower channels cold air from the evaporator to the refrigerator compartments to help maintain even cooling and airflow. Replaces a damaged or cracked duct to restore proper air distribution. What it does:

• Directs refrigerated air through the cabinet so compartments reach intended temperatures
• Restores proper airflow when the original duct is cracked, broken, or misaligned
• Helps reduce hot or uneven spots caused by disrupted air pathways
• Works with the evaporator and blower to route conditioned air where needed

• One air tower (air duct) as pictured

• Disconnect power to the appliance before starting any repair
• Handle the plastic housing carefully to avoid breaking mounting tabs
• Align and snap or fasten the tower into existing cabinet mounting points; basic hand tools may be needed

The Bulb-Light is an OEM part for Whirlpool refrigerators. This bulb is designed to illuminate the interior of your refrigerator, making it easier to see and organize the contents. 

Symptoms of a failing refrigerator light bulb include:

• Dimming or flickering of the light
• Light not turning on when the refrigerator door is opened
• Inconsistent performance, with the light turning on and off intermittently

Causes of light bulb failure in refrigerators generally involve the bulb reaching the end of its useful life, loose connections in the light socket, or issues with the refrigerator’s door switch that controls the light.

This OEM part is also compatible with other Whirlpool brand appliances, such as Maytag, KitchenAid, Jenn-Air, Amana, and others.

This replacement lens is the clear plastic cover that protects a control panel display or indicator light and helps keep the area visible and clean. It restores the original appearance and shields internal components from dust and damage. What it does:

• Covers and protects the control panel display or indicator light from dirt, spills, and impact
• Helps maintain visibility of panel icons and indicator lights
• Prevents direct contact with bulbs or electronic components behind the panel
• Addresses symptoms such as cracked, scratched, discolored, loose, or missing lens covers

• One lens cover

• Disconnect power to the appliance before beginning any repair
• Typically installs with snap clips or screws; access may require removing a trim piece or control panel
• Handle the lens carefully to avoid scratches during installation

This replacement silverware basket holds forks, knives and spoons so utensils stay organized during dishwasher cycles and drain properly. Fits the dishwasher tub where the original utensil basket sits. What it does

• Holds and separates silverware and small utensils to prevent nesting and ensure cleaning
• Keeps cutlery contained so items don't fall onto the lower spray arm
• Allows water to drain through while protecting utensils during the wash
• Helps maintain efficient loading and prevents loose items from obstructing wash performance

• Remove the lower dish rack to access the basket before removing the old unit
• Install by seating the basket in the tub rack until it sits securely; no tools typically required
• Inspect for cracked or broken tabs on the rack or basket that could prevent proper seating
• For safety, follow the dishwasher manufacturer's instructions and disconnect power if performing other repairs

The freezer wire shelf is an OEM replacement part for Whirlpool side-by-side refrigerators. It is a freezer shelf component designed to fit and provide storage organization within the deep interior of the refrigerator's freezer section. The shelf measures approximately 27.5" X 15.75"

Symptoms of a bad shelf can include:

• Food packages falling through gaps or sagging areas of the wires
• The shelf unable to properly contain or support typical freezer loads
• Rattling or movement when the refrigerator door is closed

Causes of a bad shelf include bending or warping from heavy loads, broken upright wires from added impact or pressure, or signs of rust on metal surfaces over time.

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

The Wire Shelf is an OEM part for Whirlpool freezers. It is a durable grid shelf that provides adjustable storage space within the freezer compartment.

Causes of a bad freezer wire shelf can include damage or breakage in the wires themselves over repeated uses and impacts. Mineral deposits or corrosion may also build up over time and affect shelf integrity or functionality.

Symptoms of a defective freezer wire shelf include:

• Difficulty accessing foods stored below due to misaligned shelving
• Potential for food items to fall or become disorganized on a loose shelf
• Bits of broken wire posing a puncture hazard if the grid is damaged

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper and some Kenmore models.

This replacement door gasket creates an airtight seal for the refrigerator fresh-food compartment to help maintain proper cooling and reduce frost buildup. It restores door sealing to help the appliance run more efficiently. What it does

• Seals the fresh-food compartment door to keep cold air in and warm air out
• Helps reduce frost and moisture buildup inside the compartment
• Supports consistent internal temperature for safer food storage
• Can improve energy efficiency when the door seal is compromised

• Disconnect power to the appliance before starting any repair.
• Remove the old gasket per the manufacturer's instructions; inspect the door surface for damage or debris.
• Warm and flex the new gasket as needed to ease installation; ensure the gasket is seated evenly in the door channel.
• After installation, check the door for a secure, even seal; adjust alignment if necessary.

This replacement door gasket creates an airtight seal for the refrigerator fresh-food compartment to help maintain proper cooling and reduce frost buildup. It restores door sealing to help the appliance run more efficiently. What it does

• Seals the fresh-food compartment door to keep cold air in and warm air out
• Helps reduce frost and moisture buildup inside the compartment
• Supports consistent internal temperature for safer food storage
• Can improve energy efficiency when the door seal is compromised

• Disconnect power to the appliance before starting any repair.
• Remove the old gasket per the manufacturer's instructions; inspect the door surface for damage or debris.
• Warm and flex the new gasket as needed to ease installation; ensure the gasket is seated evenly in the door channel.
• After installation, check the door for a secure, even seal; adjust alignment if necessary.