Parts for White Outdoor 242-632-190 / 1992: Log Splitter Parts

This nut, or slotted nut, is a genuine MTD part. It is a replacement part for use on lawn mowers, log splitters, wood chippers, lawn tractors, and chipper shredders. It is hexagonal in shape.The uses for this nut vary greatly depending on the machine with which owners plan to use it. Generally speaking, nuts work to secure various parts of components together. Loosening and tightening most nuts can be accomplished with a wrench. Before making any repairs, be sure that the engine has completely cooled, empty the fuel tank to avoid spillage, and disconnect the spark plug or battery. Wear work gloves and other protective gear.This nut is a genuine OEM part sourced directly from the manufacturer. It is sold individually; very often, more than one nut is used on machines such as these, so be sure to check how many are needed. It is designed for compatibility with various machines made by Agway Craftsman, Cub Cadet, Duerr, MTD, Lawn Chief, OEM, Ranch King, Remington, Ryobi, White Outdoor, Yard Machines, and Yard-Man.

A cotter pin is a standard piece of hardware typically used on lawn and garden equipment as a method of securing something to an axle or round shaft. These pins are thin and, although they are durable, they can rust or become damaged over time. In some instances, they can break off or become lost in the process of other repairs. A replacement with the right size and style of cotter pin will ensure that equipment is in working order at all times. This genuine OEM cotter pin replacement can be used with select lawn and garden equipment from MTD, Huskee, Yard Man, Yard Machines, Troy-Bilt, Bolens, Cub Cadet, and Murray. It can be used on lawn tractors, log splitters, chipper/shredder units, and snowblowers. There are more than 150 compatible units, so owners should consult their parts diagram for application(s) of this pin. Note that this pin may have multiple applications on a single machine. This cotter pin is sold individually and may require needle nose pliers to replace.

This hubcap is an authentic OEM replacement part sourced directly from the manufacturer for use on log splitter and chipper wheels. The hubcap covers the central opening of the wheel assembly. This prevents dirt and debris from getting into the wheel assembly. If the hubcap comes off during use or is lost when replacing tires, a new one should be installed. The machine will work without a hubcap; however, the interior wheel assembly will be open to flying debris and could be damaged if rocks or large limbs go into the wheel assembly. During routine inspection and maintenance, the hub caps should be checked for damage and to make sure they are in place.The hubcap is easily removed and replaced with a screwdriver needed to pry the old hubcap off if it is still on the machine. The new hubcap simply snaps into place. This hubcap is made of high-quality metal and is sold individually. This hubcap is designed to be used with log splitters and chippers manufactured by MTD, Cub Cadet, Troy Bilt, Husky, and Yard-Man.

This tubeless air valve attaches to wheels, allowing air into and out of the tires on various lawn equipment. Regularly replacing this part is considered a part of routine maintenance. Make sure that you use appropriate pliers and other tools for easy installation. Be sure to use gloves when replacing these valves and work with caution so as not to damage the sensitive parts. This OEM tubeless air valve can be the perfect fit for compatible wheels on equipment such as lawn mowers, snowblowers, tillers, edgers, log splitters, and wood chippers. It is designed for use with select models from MTD, including Craftsman, Troy-Bilt, Bolens, Remington, Yardman, RYOBI, Husky, Power Pro, and many others. There is a limited parts warranty on this valve, which is made of durable rubber and metal and designed to offer a high-quality replacement. Sold individually.

This replacement part is a wheel intended for use in lawn equipment. This is a genuine replacement part made by MTD. Wheels allow the user to move the machine with ease and precision. Many different appliances are made to be easily transported and moved around on wheels. A new wheel might be needed if the current ones are worn down or broken in any way. It is not unusual for this part to require replacement after years of normal use as the wheels might lose traction overtime. Be sure the appliance is completely powered down and cooled off before attempting to replace this part. It is suggested that the user refer to the reference guide for directions on how to replace this part. This is an OEM part sourced directly from the manufacturer. It is sold individually. This replacement part is compatible with lawn equipment made by MTD.

This is a flat washer that can be used with bolts and screws on many kinds of lawn and garden equipment. Before a bolt can be fastened to a surface, a fastener needs to be inserted through the end. A washer can be used with these items to help distribute the load. Washers are also responsible for decreasing heat and friction while a fastener is tightened to a surface. Washers can also be used to offer electrical insulation or operate as spacers.Even though washers are made of durable materials, they can be damaged over time. If the shape of the washer is bent or cut in half, this indicates that it needs to be replaced. A socket wrench or screwdriver can be used to make the replacement. Remove the screw or bolt, remove the fastener, and add the washer to the fastener before it screws back in.This flat washer is a genuine OEM replacement part sourced directly from the manufacturer. It is compatible with lawnmowers, wood chippers, snowblowers, log splitters, tillers, chainsaws, and edgers by Craftsman, MasterCut, Cub Cadet, Turf King, Ryobi, Bolens, Husky, Montgomery Wards, Murray, Huskee, Yard Machines, and MTD. It comes as an individual part.

This part is a replacement mandrel bearing. This is a genuine OEM part made by MTD and has been sourced directly from the manufacturer. This part can be used to replace a defective or broken mandrel bearing in a variety of lawn tractor models. Mandrel bearings are a critical component that ensures no excess heat, friction, or vibration occurs while the equipment is in use. Bearings are subject to wear and tear and will require replacement when no longer working effectively. When working on or near an engine, it's important to ensure that the equipment is powered off and completely cool before beginning any repairs. For more accurate information on how and where to place this mandrel bearing, the appropriate owner's manual and equipment diagrams should be referred to. As an authentic replacement part, this mandrel bearing is suitable for use on lawn tractors manufactured by MTD, Craftsman, Troy-Bilt, and other brands. Please note that this is a genuine part made of high-quality, durable metal and is sold individually.

This lock washer is a genuine MTD part, sold individually. This lock washer can be used as a replacement part in lawn mowers, snowblowers, tillers, string trimmers, leaf blowers, edgers, log splitters, and wood chippers.The lock washer in a small engine outdoor appliance is a small component that can easily be lost or misplaced during the typical lifespan of the appliance. If this occurs, it should be replaced once the operator of the appliance notices its absence. The washer can also be stripped away as a result of general wear and tear, in which case it should be removed and replaced by this genuine OEM replacement part.This is a genuine OEM replacement part sourced directly from the manufacturer. It is sold individually. This lock washer is compatible with the following outdoor appliance brands: MTD, Craftsman, Cub Cadet, Troy-Bilt, Husky, Broan, Yard Machines, Huskee, Montgomery Wards, Yard Man, Turf King, and MasterCut.

This nipple pipe is a genuine MTD part, sold individually. This nipple pipe can be used as a replacement part for lawn mowers, edgers, log splitters, and wood chippers. The purpose of a nipple pipe is to serve as a fastening connector for various components with female threads, as nipple pipes have male threads on either end.The nipple pipe is a small component, so it can easily be lost or misplaced while the outdoor appliance is in operation. Additionally, the nipple pipe can be stripped over time so it cannot fasten components to one another. If this occurs, the component should be removed and replaced by this genuine OEM replacement part. Remember to always wear gloves when handling, repairing, and operating outdoor equipment. Always unplug the appliance before performing any kind of repair or replacement.This is an OEM part sourced directly from the manufacturer. It is sold individually. This nipple pipe is compatible with the following outdoor appliance brands: MTD, Yard Machines, Cub Cadet, Troy-Bilt, Huskee, Yard Man, and MasterCut.

This hex bolt is a genuine MTD part, sold individually. This hex bolt can be used as a replacement part in lawn mowers, edgers, log splitters, and wood chippers. The purpose of the hex bolt for these outdoor appliances is to serve as a fastening component in conjunction with a nut so that one or more components can be held together with the aid of this fastener.The hex bolt in an outdoor appliance might need to be replaced if it is lost, misplaced, or stripped. If the hex bolt is lost or misplaced, it should be replaced by this genuine OEM replacement part. If the hex bolt suffers damage in the form of scraping, denting, cracking, or eroding over time, the component should be replaced immediately.This component is a genuine OEM replacement part sourced directly from the manufacturer. It is sold individually. This hex bolt is compatible with the following outdoor appliance brands: MTD, Craftsman, Cub Cadet, Ryobi, Yard Machines, Huskee, Yard Man, and MasterCut.

This genuine OEM replacement nut-hex center is used on lawnmowers, wood chippers, snowblowers, chainsaws, tillers, edgers, and log splitters. Hex is short for hexagon, which means this nut has 6 sides. This hex center locking nut is one piece and made of all metal. As the nut is made from metal, it is not compromised due to high temperatures.The purpose of this center locking nut is for fastening to a hex cap screw, socket cap screw, or bolt. Given that these center nuts will stay put without being seated, they are ideal to be used as stop nuts or spacers for rotating or other components. These nut hex centers contain internal threads and are driven with a wrench. These center nuts are reusable for a limited number of times, as the torque declines after each use. The user will want to ensure the threads of the nut are not compromised before using. It is recommended to use a new nut over a used one. This replacement nut is compatible with Craftsman, Cub Cadet, Ryobi, Yard Machines, MTD, Husky, Yard-Man, and MasterCut devices. This Nut-Hex Center is sourced directly from the manufacturer and is sold individually.

This is a replacement for the wedge assembly on select outdoor power equipment. The wedge assembly is used to guide wood into the machine parts of chippers and log splitters so that it can be properly fed and chipped. This durable metal part is often subject to impact damage and wear, and it can become damaged over time in a way that could render the unit useless until it is replaced. Without a safely functioning wedge assembly, the unit should not be used. The genuine OEM wedge assembly is manufactured to specific requirements for use in outdoor lawn and garden equipment from MTD, Cub Cadet, and Yard Man. The wedge assembly is specifically for log splitters and chippers that are compatible with the part, and requires minimal tools and time for replacement. Be sure to disconnect all power to the unit before performing any repairs for safety as there are several sharp and dangerous moving parts in these machines. Wear gloves and allow the unit to cool completely before doing any repairs.

This part is an adjustable gib that is used on log splitters and chipper shredders. This component is also called a keyway. The adjustable gib locks two shafts together so that they can rotate.A new adjustable gib may be needed if the shaft is freely spinning and will not spin with the drive shaft. If the adjustable gib is cracked, broken, or damaged in any way, it will need to be replaced. Remember to wear gloves when operating or performing care and maintenance on any outdoor power equipment. Never perform care and maintenance on outdoor power equipment that is powered on.This adjustable gib is a genuine MTD part. It is sold individually. This specific adjustable gib is compatible with log splitters and chipper shredders that are manufactured by MTD, Yard Machines, Cub Cadet, Yard-Man, Husky, and Troy-Bilt.

This part is a replacement floating gib plate. This is a genuine OEM part made by MTD and has been sourced directly from the manufacturer. It can be used to replace a broken or defective floating gib plate in a variety of different log splitter models.The floating gib plate works to support the wedge assembly and keep it in good alignment. This part can become worn or broken over time and will require replacement to keep the equipment functioning properly. Proper tools may be required to install this part. When working on or near an engine, ensure the equipment is powered off and completely cooled down before starting any repairs. For more accurate information on how and where to install this floating gib plate, the appropriate owner's manual and equipment diagrams should be referenced. As an authentic replacement part, this floating gib plate is suitable for use on several different models of lawnmowers manufactured by MTD. Please note that this is a genuine part made of high-quality, durable materials and is sold individually.

This control valve is a genuine MTD part, sold individually. This control valve can be used as a replacement part for a log splitter or a wood chipper. The purpose of the control valve for a log splitter or a wood chipper is to facilitate and regulate the motion of the cylinder head.The control valve might eventually have to be replaced at some point within the standard lifespan of the equipment if the component is not functioning as it usually does. This could occur if the control valve has suffered damage that has rendered it broken, malfunctioning, or in some state of disrepair. If this is not able to be fixed by basic repair, the component should be removed and replaced by this genuine OEM replacement part. Remember to always wear gloves when handling, repairing, and operating outdoor equipment. Always unplug the appliance before performing any kind of repair or replacement.This is an OEM part sourced directly from the manufacturer. It is sold individually. This control valve is compatible with the following outdoor appliance brands: MTD, Troy-Bilt, Yard Man, Bolens, Ryobi, Craftsman, Yard Machines, and MasterCut.

This is a quality clevis pin that is specifically designed for use with wood chippers and log splitters. The clevis pin is a secure and easily installed fastener that is often used in the place of rivets and bolts. As with other fasteners, the clevis pin is durable and long-lasting but wear and tear or use of the equipment can cause damage. If the clevis pin is damaged, broken, or has been lost, it will need to be replaced.When replacing a clevis pin, the tool should be powered off. Remove the spark plug wire and place the tool on a sturdy surface during the replacement process. The clevis pin may be located in various places depending on the model. Use the user's manual to determine where to get access to it. Remove the old pin and replace it with a new one before reassembling the machine.This clevis pin is sold on an individual basis. The component is designed to be compatible with lawnmowers, wood chippers, and log splitters manufactured by MasterCut, Yard-Man, MTD, Yard Machines, Ryobi, Cub Cadet, and Craftsman. This is an authentic OEM replacement part that is sourced directly from the manufacturer.

This is a genuine washer lock that is designed to be used in various applications on lawn and garden equipment. It is a standard piece of hardware that provides a strong seal and distributes pressure between the two connected components. Because of the exposure to high pressure and vibrations, these washers can become damaged or broken over time. If they are not replaced promptly, the connection between the two different parts may be affected. These washers are small and can also get lost while doing other repairs, so it may be helpful to keep some extras on hand. This genuine OEM lock washer is manufactured to exact standards and is compatible with several lawn and garden machines from Husky, Cub Cadet, MTD, RYOBI, Yard Machines, Troy Bilt, Yard Man, and Bolens. It can be used with over 150 models of tractors, blowers, cultivators, trimmers, and snowblowers. Consult the parts diagram for the exact location(s) and application(s) of this washer. Replacing this washer will require a screwdriver or socket set to attach the screws or bolts that the washer is securing. Always wear gloves for hand protection when replacing engine components like this lock washer.

This part is a replacement jack stand. This is a genuine OEM part made by MTD and has been sourced directly from the manufacturer. It can be used to replace a broken or malfunctioning jack stand in a variety of different log splitter models.The jack stand is what enables the log splitter to be easily raised, steadied, or leveled out when stationary and ready to be used. If the jack stand becomes dented or broken in any way, the equipment may not be sufficiently stabilized and may not be able to be used safely. Always wear work gloves to protect the hands when replacing equipment parts. Additionally, when working on or near an engine, ensure the equipment is powered off and completely cooled down before starting any repairs. For more accurate information on how and where to install this jack stand, the appropriate owner's manual and equipment diagrams should be referenced. As an authentic replacement part, this jack stand is suitable for use on several different models of log splitters manufactured by MTD, Cub Cadet, and Troy-Bilt. Please note that this is a genuine part made of high-quality, durable materials and is sold individually.

This replacement part is a tube tongue, and it is intended for use in different types of lawn equipment. This is a genuine replacement part made by MTD. Tube tongues are commonly found in log splitters and are one of the main parts of this appliance. Tube tongues are used to place logs prior to being split. This part helps line the piece of wood up with the splitting mechanism so that it is cut properly. A new tube tongue might be needed if the current one is damaged or broken in any way. Because this part is so important to the main part of a log splitter, it is possible that the device will not work if it is damaged in any way. Log splitters have various sharp and dangerous parts, so be sure to wear working gloves while completing this repair. Reference the appropriate user guide for more specific instructions on how to replace this part. This part is sourced directly from the manufacturer. This is a genuine OEM replacement part and is told individually.

This beam support assembly is a genuine MTD part, sold individually. This beam support assembly can be used as a replacement part for a log splitter. The purpose of the beam support assembly is to reduce stress on the beam so that the appliance can continue to operate under extreme conditions without wearing down quickly.The beam support assembly might need to be replaced at some point within the standard lifespan of a log splitter if the appliance becomes worn with long-term use or is otherwise damaged. If either of these incidents result in damage to the beam support assembly, the component should be removed and replaced with this genuine OEM replacement part. Remember to always wear gloves when handling, repairing, and operating outdoor equipment. Always unplug the appliance before performing any kind of repair or replacement. This is an OEM part sourced directly from the manufacturer, and it is sold individually. This beam support assembly is compatible with the following outdoor appliance brands: MTD, Craftsman, Troy-Bilt, and Cub Cadet.

This is an oil filter designed for use in larger gasoline-powered landscaping and outdoor equipment such as log splitters and chippers. An oil filter is an essential safeguard to maintain a good operating condition and ensure long life in a gas engine. Oil filters remove toxic chemicals as small pieces of debris that can end up in the engines. Because these contaminants, if improperly removed, could also end up in the air or in the environment in other ways, oil filters must be meet EPA emission regulations. This filter not only meets federal environmental standards but also is an OEM guaranteed replacement part that is manufactured to the identical specification of the original parts being replaced. By the very nature of what it's supposed to accomplish, eventually, the filter will need to be replaced. Over time the filter's elements will become full of debris, and failing to replace it in a timely manner runs the risk of allowing the captured pollutants to escape back into the engine oil. When replacing the old filter, make sure to follow environmental guidelines as well, disposing of the oil and filter according to posted regulations. Replacing the filter is the ideal time to replace the engine oil as well. This filter is compatible with Husky, Cub Cadet, Troy-Bilt, Yard-Man, and MTD equipment.

This part is a replacement filter head. This is a genuine OEM part made by MTD and has been sourced directly from the manufacturer. This part can be used to replace a defective or broken filter head in a variety of power equipment. The filter head attaches to the filter itself and contains a built-in pressure bypass. This stops the filter from becoming blocked should debris or cold oil pass through. The filter head can become clogged over time and if this happens it should be replaced immediately. It is always recommended that the appropriate safety precautions are adhered to when attempting to fix any power tools or machinery. When working on or near an engine, ensure the equipment is powered off and completely cooled down before starting any repairs. For more accurate information on how and where to install this filter head, the appropriate owner's manual and included diagrams should be referenced.As an authentic replacement part, this filter head is suitable for use on several different models of log splitters and chipper shredders manufactured by MTD, Yard Man, Cub Cadet, and Yard Machines. This is a genuine part made of high-quality, durable materials and is sold individually.

This part is a replacement return hose. This is a genuine OEM part made by MTD and has been sourced directly from the manufacturer. This part can be used to replace a damaged or detached return hose in a variety of outdoor power equipment. The return hose returns any excess fuel from the carburetor back into the fuel pump. Over time, this part can become worn or may be punctured, which can cause fuel leaks. In this case, it should be replaced immediately before the equipment is used again. It is always recommended that the appropriate safety precautions are adhered to when attempting to fix any power tools or machinery. For more accurate information on how and where to install this return hose, the appropriate owner's manual and included diagrams should be referenced.As an authentic replacement part, this return hose is suitable for use on several different models of chippers, shredders, and log splitters manufactured by MTD, Troy-Bilt, Yard Man, Cub Cadet, Husky, and Yard Machines. This is a genuine part made of high-quality, durable materials and is sold individually.

Cotter pins are simple but very effective fasteners used primarily to hold wheels in place on mowers. This is particularly true of the front wheels on riding mowers. Cotter pins are very light and can become overly pliable after extensive use. In some cases, the front wheels of a mower, which are the guide wheels that steer the device, become difficult to manage. The cure for this situation is often simply the replacement of the cotter pins that are not holding the guide wheels adequately in place. Before attempting to remove the pins, it is essential that the spark plug boot is moved so that the mower cannot be started. This is an important safety step because the repairer will be getting under the mower near the blades. The back wheels should be blocked so the mower cannot move, then the front end placed up on blocks. Remove the mower's hubcaps to gain access to the axle spindles. Straighten the legs of the pin so that when the curved portion of the cotter pin is grasped with pliers and it can be pulled straight back and be removed. The spindle, washers, and wheels should be checked for wear before the new pin is placed and secured. This OEM cotter pin is compatible with Bolens, Yard-Man, Craftsman, Yard Machines, Cub Cadet, Turf King, Troy-Bilt, Huskee, Toro, Ryobi, MTD, MasterCut, Murray, and Montgomery Wards.

This part is a replacement hex bolt. This is a genuine OEM part made by MTD and has been sourced directly from the manufacturer. This part can be used to replace a lost or defective hex bolt in outdoor power equipment. The hex bolt is named for its hexagonal shaped head and is important for properly securing together different equipment components. It should be replaced if lost, worn, stripped, corroded, or ineffective in any way. When working on or near an enginee, it is important to ensure the equipment is powered down and completely cool before beginning repairs. For more accurate information on how and where to place this hex bolt, the appropriate owner's manual and equipment diagrams should be referred to. As an authentic replacement part, this hex bolt is suitable for use on outdoor power equipment manufactured by MTD, Craftsman, Troy-Bilt and other brands. Please note that this is a genuine part made of high-quality, durable metal and is sold individually.

This flexible coupling is a genuine MTD part, sold individually. This flexible coupling can be used as a replacement part for a log splitter or a chipper shredder. The purpose of the flexible coupling is to carry on the power transmission between multiple shafts. Remember to always wear gloves when handling, repairing, and operating outdoor equipment. This is an OEM part sourced directly from the manufacturer. It is sold individually. This flexible coupling is compatible with the following outdoor appliance brands: MTD, Cub Cadet, Yard Machines, and Yard Man.

This lock washer is used frequently for a number of applications on power yard equipment. The size, 5/16, is the default for many small engine housing and manifold applications. Lock washers are used with machined bolts to fasten engine blocks to the housing of the equipment being used. The compressed washer is able to handle the constant vibration of the small gasoline engine without losing the seal between the screw or bolt and the housing. Typically these lock washers only need to be replaced when they are misplaced during repairs or when the screws that attach them have to be chiseled or cut away, meaning the washers are destroyed as well. These OEM certified replacement washers have been manufactured to the same specifications as the originals they are replacing. In addition to lawn mowers, lock washers of this type and size are frequently used on blowers, lawn tractors, cultivators, snowblowers, and trimmers. Brands compatible with this type of washer are Murray, Husky, Poulan, Bolens, Yard-Man, Cub Cadet, Troy-Bilt, Yard Machines, MTD, and Ryobi.

The replacement flat washer here is a part commonly found on many types of small engines, including those in lawn and garden equipment. The washer can be used on various parts of the engine depending on the make and model. The washer can help to spread the pressure of the connection over a wider surface area. This will help reduce damage to the machine at the connection point. The washers are made from metal and there may be a need to replace them. If they have become corroded, bent, or lost, they should be replaced right away. Owners should keep in mind what with some models, the washers will be secured with the use of a push pin. The push pins are sold separately. This is an authentic OEM replacement flat washer that is sold individually. The washer can be used on many types of equipment including lawn mowers, snowblowers, tillers, string trimmers, leaf blowers, edgers, log splitters, and wood chippers. Compatible brands include Craftsman, Cub Cadet, Ryobi, Troy-Bilt, Husky, Yard Machines, MTD, Huskee, Montgomery Wards, Bolens, Yard-Man, Turf King, and MasterCut.

This handle grip is a genuine MTD part, sold individually. This handle grip can be used as a replacement part in a variety of small engine outdoor appliances including lawn mowers, log splitters, and wood chippers. The purpose of the handle grip for one of these appliances is to cover the surface area of the handle so that it can be more easily and more comfortably grasped by the operator of the appliance while in use.The handle grip in a lawn mower, log splitter, wood chipper, or other type of outdoor appliance could suffer damage within the general lifespan of the appliance. If the handle grip is sufficiently punctured, eroded, warped, torn, or otherwise damaged in a manner that precludes it from providing comfort and ease to the operator, the handle grip should be removed and replaced by this genuine OEM replacement part.This OEM part is a genuine replacement that is sold individually and sourced directly from the manufacturer. This handle grip is compatible with the following outdoor appliance brands: MTD, Cub Cadet, Yard Machines, Troy-Bilt, Bolens, MasterCut, and Yard Man.

Here is a replacement control handle assembly for use with chippers and similar machines. The assembly is the part of the machine that allows the user to control the function of the machine. Control handles tend to be well-made and durable, and they can last a long time on the machines. However, owners may find that they will eventually need to replace the handle assembly. The handle could break, there could be corrosion or a break on the lever, or one of the connecting pieces, such as a pin, could become lost or broken. When dealing with a problematic control handle assembly, it is often a good idea to replace the entire assembly, not just a piece of it. This is a genuine OEM replacement control handle assembly for log splitters and wood chippers. The control handle assembly is sold individually, but it does contain the parts that are needed to replace and affix the handle to the machine. The part can work with more than 150 different machines, and it is compatible with Cub Cadet, Yard Machines, MTD, MasterCut, and Yard-Man.

This part is a replacement stripper half. This is a genuine OEM part made by MTD and has been sourced directly from the manufacturer. It can be used to replace a broken, detached or malfunctioning stripper half in a variety of different log splitter models.The stripper helps to remove a partially split log if it gets stuck within the wedge assembly. This enables the log splitter to remain clear and unclogged of debris and keeps it functioning properly. This part is subject to wear and tear and may require replacement within the lifespan of the equipment. Wear work gloves to protect the hands when replacing equipment parts. Additionally, when working on or near an engine, ensure the equipment is powered off and completely cooled down before starting any repairs. For more accurate information on how and where to install this stripper half, the appropriate owner's manual and equipment diagrams should be referenced. As an authentic replacement part, this stripper half is suitable for use on several different models of log splitters manufactured by MTD. Please note that this is a genuine part made of high-quality, durable metal and is sold individually.

The replacement screw seen here is made from high-quality, durable metal. It is an identical replacement for a faulty screw in many types of lawn and garden equipment. The screw features a hex-bolt shaped head and is used for various applications in the machines. Owners will want to refer to diagrams of their model to ensure the correct application for the screw. A screw may need to be replaced for any number of different reasons. In some cases, the screw could become lost when making other repairs to the machine. It could also become bent or the threads could be damaged. Corrosion is also a possibility over time. Replacing the screw is typically considered a fast and easy repair. The screw is a genuine OEM replacement part that is sold individually. The screw can be used for many models of snowblower, lawnmower, chainsaw, tiller, string trimmer, log splitter, edger, and wood chipper. Compatible brands include Craftsman, Cub Cadet, Troy-Bilt, Murray, Yard Machines, MTD, Huskee, Montgomery Wards, Bolens, Yard-Man, and MasterCut.

This flat washer is used to attach the idler pulley in a number of small and medium sized gasoline powered engines. These engines include snow blowers, log splitters, riding mowers, lawn tractors, and chippers. Because the idler pulley is subject to a great deal of resistance when the pulley is engaged, eventually the pulley will wear out. Should there be a squealing sound when engaging the drive, the problem is likely the idler pulley. In these cases, the pulley must be replaced. It is a good idea to replace the surrounding hardware when replacing the idler pulley; tNhis includes the flat washer, which is subject to corrosion during heavy use. To replace the idler pulley, first detach the spark plug cap. If on a mower or tractor, drop the mower deck. Remove the original pulley and install in order: replacement pulley, hex bolt, flat washer, flange nut. Apart from dropping the mower deck, the only tools required to complete this installation may be a 9/16 ratchet and combination wrench. This washer is a genuine OEM replacement part, designed to perfectly replicate the original piece. This washer is compatible with Troy-Bilt, Yard Man, Yard Machines, MTD, and Craftsman devices.