Parts for Briggs & Stratton 126T00 (0004-4830): Magneto Armature / Control Bracket Parts

Seals between crankcase and crankshaft to prevent oil leaks and contamination. Replace if you notice oil pooling or engine performance issues.

Replace your blown cylinder head gasket to stop oil and coolant mixing. Prevents overheating and engine damage. Requires wrenches and screwdrivers.

Crankcase gasket creates an airtight seal to prevent oil and air leaks. Replace when deteriorated from heat and pressure. Confirm fit with model number.

This genuine Midwest Engine screw can be used as a replacement part for a variety of outdoor lawn and garden appliances including lawn mowers, snowblowers, tillers, pressure washers, generators, leaf blowers, edgers, and wood chippers. A screw might have to be replaced within the lifespan of one of these types of outdoor appliances. Tthis is a common occurrence as screws are small components that are easily lost and misplaced. Screws can also loosen over time, necessitating a replacement. If this is the case, the screw should be replaced with this OEM replacement part. Remember to always wear gloves when handling, repairing, and operating outdoor equipment. This is an OEM part sourced directly from the manufacturer. It is sold individually. This screw is compatible with the following outdoor appliance brands: Midwest Engine, Briggs & Stratton, Craftsman, Toro, Cub Cadet, Lawn Boy, Simplicity, and MasterCut.

Lower oil seal prevents engine oil leaks in small lawn and garden engines. Replace if you notice oil pooling or reduced performance. Verify fit with your engine model number.

Engine won't restart after hitting an object? A sheared flywheel key is often the cause. This small part keeps the flywheel connected to the crankshaft.

Piston ring set for small engines. Installs around the piston to maintain compression. Replace if rings are worn, cracked, or broken for proper seal.

Fix engine knocking or power loss with this piston pin lock. Secures the piston pin in small engines. Basic mechanical skills needed for installation.

Outer trim panel for lawn and garden engine control area. Replaces cracked, dented, scratched, or warped facia. Restores finished appearance.

This screw is a genuine Midwest Engine replacement part for small engine appliances, including lawn tractors, lawn mowers, snowblowers, leaf blowers, vacuums, and tillers. The purpose of a screw is to tightly link materials together through rotation that pierces into the material. A screw might have to be replaced in the event that it is lost or misplaced, a common occurrence due to its size. A screw might also be replaced if it deteriorates over time, through erosion, cracking, or piercing, thereby reducing its efficacy in holding materials together. This kind of damage can be attributed to general overuse, to age, or simply to long-term exposure. If a screw is subject to any of this kind of damage, it is best to replace it immediately, as the materials held together by the screw must continue to be held together. Remember to always wear gloves when handling, repairing, and operating outdoor equipment. This screw is compatible with the following brands: Briggs & Stratton, Toro, Cub Cadet, and Lawn Boy.

Replace a worn valve retainer if your engine has compression loss or valve train noise. This washer-shaped part secures the valve spring lock on the valve.

The intake manifold is designed to manage the combustion mixture of an engine. If it is part of a direct injection engine, it manages the air alone. The cylinder heads of the engine each have an air intake port that allow proper amounts of air, fuel, and spark to make the most of an engine's performance and efficiency. When a small motor operates poorly, it could be that the intake manifold needs replacement. This OEM replacement intake manifold works with small engine machines, lawn mowers, snowblowers, pressure washers, generators, wood chippers, and pressure washers. It works with many brands, including Briggs & Stratton, Toro, Cub Cadet, Lawn Boy, and many more. Replacing the intake manifold varies by machine and model. This kit ships individually.

This genuine OEM gasket sits between the carburetor and cylinder to create a seal on a wide range of different lawn mower engines. The carburetor is responsible for mixing fuel and air, so it is important that it remains well sealed. The cylinder sits on top of the combustion chamber, and must also be sealed to provide the proper amount of pressure to drive the pistons. Therefore, it's crucial that nothing escapes from the engine where these two parts meet. Gaskets are designed to take a lot of wear and tear, but they can eventually blow after repeated exposure to heat and pressure. When a carburetor and cylinder gasket blows, the engine will not perform as well. Look out for vibrations, backfiring, low output, or an engine that stops shortly after startup. To replace this gasket, use a screwdriver, wrench set, and pliers to gain access to the carburetor's inner workings. This part is compatible with Toro, Lawn Boy, and Briggs & Stratton lawn mowers and comes sourced from its original manufacturer. This part ships individually.

Replace a frayed or broken starter rope that prevents your lawn mower engine from starting. Simple DIY repair that restores pull-start function.

Can't start your engine? A frayed or broken starter rope grip prevents pull-starting. This replacement rope grip restores easy starting in 15 minutes.

Replacement mounting screw for lawn and garden engines. Secures components together during operation. Replace if stripped, missing, or damaged.

Flange screw for lawn and garden engines. Distributes connection force over a larger area. Replace if threads are stripped, head is damaged, or screw is missing.

Mounting screw for lawn and garden engines. Secures engine components and covers. Replace if stripped, corroded, missing, or damaged during maintenance.

Fix poor engine performance and hard starting with this carburetor overhaul kit. Restores proper fuel mixture for lawn mower and trimmer engines.

Fix a flooded carburetor with this float. Controls fuel flow to the carburetor bowl, preventing flooding and ensuring proper air-fuel mixture.

Mower won't start or runs poorly? Cracked or leaking fuel lines prevent proper fuel delivery. Simple 15-minute DIY repair restores engine performance.

This genuine Briggs & Stratton governor link can be used as a replacement part for appliances operated by small engines, including lawn tractors, lawnmowers, snowblowers, leaf blowers, vacuums, tillers, and generators. The function of a governor link on a small engine appliance is to set the throttle to run at a steady speed. A governor link might have to be replaced if it withstands enough damage to prevent the governor link from keeping the throttle running and keeping the rest of the engine's governor assembly in place. Remember to always wear gloves when handling, repairing, and operating outdoor equipment. This governor link is compatible with the following brands: Midwest Engine, Briggs & Stratton, Toro, Cub Cadet, and Simplicity. This part is sold individually.

This governor spring is a genuine Midwest Engine part, sold individually. This governor spring can be used as a replacement part for a pressure washer. The purpose of a governor spring in a pressure washer is to open the throttle of the appliance and maintains its positioning so that the speed and pacing of the appliance can be controlled by the operator.The governor spring might have to be replaced if it suffers damage that affects its ability to maintain spring tension. The governor spring could be cracked, punctured, scraped, or eroded from general wear and tear over long-term use or as the result of an accident that warps the component beyond functionality. If this occurs, the governor spring should be removed and replaced by this genuine OEM replacement part. Remember to always wear gloves when handling, repairing, and operating outdoor equipment. Always unplug the appliance before performing any kind of repair or replacement.This is an OEM part sourced directly from the manufacturer, and it is sold individually. This governor spring is compatible with the following outdoor appliance brands: Midwest Engine and Briggs & Stratton.

Engine racing or won't maintain steady speed? This governor spring controls fuel flow and throttle tension. Common fix for acceleration issues. DIY repair.

The choke return spring is a part that is used on many small engines in lawn and garden equipment. The part is a component in the choke system that ensures that the correct tension is applied to keep the choke lever in the appropriate position. If the choke return spring is broken or begins to malfunction, the lawnmower may have issues keeping power and running correctly.If the choke return spring is damaged or weak, it will prevent the choke from returning to the correct position. This can cause the engine to speed up and accelerate more quickly than desired. The air filter housing will need to be unscrewed to access the choke return spring. Take the wire off the spark plug and remove the boot from the plug. Remove the spring from the linkage and then clip on the new one. Replace the other components to get the equipment to work again.This choke return spring is an authentic OEM replacement part directly sourced from the manufacturer. It is sold individually. The spring is compatible with various wood chippers, lawnmowers, and pressure washers by Briggs and Stratton, Simplicity, Toro, Lawn-Boy, and Cub Cadet.

Control wire casing for lawn and garden engines. Protects and guides throttle or choke control cables. Replace if cracked, split, or missing.

Control wire for lawn and garden engines. Connects controls to engine throttle or choke mechanisms. Replace if frayed, broken, kinked, or missing.

Sealing washer creates a leak-proof seal in your lawn and garden engine. Replace when worn or cracked to prevent oil or fuel leaks. Confirm fit.

The muffler on a lawn or garden machine is meant to cut down on the amount of noise that comes from the engine. It will also prevent sparks from the exhaust system from igniting materials beneath the machine (such as dried grass or other debris). A muffler can wear out after only a few seasons because of the amount of use, the level of dried soot from the engine, and from any holes or cracks that can form in the housing or hoses. This OEM replacement muffler works on a long list of brands of lawn and garden machines, including those from Briggs & Stratton, Cub Cadet, Toro, and Simplicity. It will work with an array of small engines, pressure washers, chippers, and lawn mowers. It ships as a full replacement, including gasket and bolts as well as muffler assembly.

This blower housing is a genuine Midwest Engine part, sold individually. This blower housing can be used as a replacement part for a variety of small engine outdoor appliances including lawn mowers, pressure washers, leaf blowers, generators, and wood chippers. The purpose of the blower housing is to provide the internal combustion engine with a means of channeling and regulating the intake of air, which mixes with fuel to ignite the spark plugs and power on the engine. Remember to always wear gloves when handling, repairing, and operating outdoor equipment. Always unplug the appliance before performing any kind of repair or replacement. This is an OEM part sourced directly from the manufacturer, and it is sold individually. This blower housing is compatible with the following outdoor appliance brands: Midwest Engine, Briggs & Stratton, Toro, and Simplicity.

Metal rear door panel for dryer drum access. Replaces cracked, dented, or rusted panels. Mounts to back of dryer cabinet for maintenance access.

Metal mounting screw for lawn and garden engines. Secures components together throughout the equipment. Replace when stripped, rusted, or missing.

This screw is designed to be used on all sorts of lawn and garden equipment. The metal screw is durable and attaches to the muff guard bracket to keep it in place and stable while the equipment is being used. This screw can become damaged through overuse or wear and tear. It can also break or become stripped, which will require it to be replaced.Visually inspecting the area with the muff guard bracket is connected to the rest of the equipment will give information about whether the screw is broken or damaged. The screws can also be cleaned to be more visible so small problems are easier to pick up on. Sometimes the screws can become loose, which is another situation where a replacement is needed. Simply use a screwdriver to take out the old screw and replace it with a new one.This screw is a genuine OEM replacement part that is directly sourced from the manufacturer. It comes as an individual part. The screw can be used on snowblowers, lawnmowers, lawn tractors, tillers, pressure washers, leaf blowers, edgers, generators, wood chippers, and log splitters made by MasterCut, Simplicity, MTD, Snapper, Lawn-Boy, Wheel Horse, Cub Cadet, Toro, Craftsman, and Briggs & Stratton.

Engine won't start? A worn pawl friction plate in the starter assembly prevents cranking. This small engine part transfers power to the starter cup.

The breather tube is responsible for filtering out exhaust gases from the crankcase. It has special fibers in the tube to remove contaminants as it moves the exhaust gases through the ventilation valve and out into the air. The tube also helps ensure that the engine air stays cool for optimal performance. This rubber tube can become dry and cracked over time, or it could be damaged due to an incident or impact. In any case, the tube should be fully replaced when it is not functional to ensure optimal performance at all times. This genuine OEM breather tube is manufactured to exact standards and made by Briggs and Stratton. It is compatible with select engines on more than 150 lawn mowers and generators from Toro, Briggs & Stratton, and Lawn Boy. This replacement tube is made of high-quality materials and sold as an individual part. No hardware or other parts are included with the purchase. This part should only be replaced once the engine is cool and all work should be done in a well-ventilated area. A screwdriver and socket set will be required to replace this part.

Secures engine components on gas line trimmers. Replace this mounting nut if it's stripped, corroded, missing, or no longer holds parts firmly in place.

Replacement screw that secures the pawl friction plate in lawn and garden engines. Replaces lost, stripped, or damaged flange bolts on the recoil assembly.

Engine won't shut off when you turn the key? Replace your lawn mower's stop switch to restore safe engine control. Simple safety repair.

Replace your engine's choke and throttle shaft seal to prevent air leaks and maintain proper engine performance. Verify fit with your model number.

Engine won't start or runs rough? A cracked or missing spark plug boot causes misfiring and prevents proper ignition. Easy DIY replacement part.

This is an authentic muffler deflector screw that is found in small engines for outdoor power equipment from Briggs & Stratton. This metal screw is designed to secure the muffler deflector to the flywheel. In select models, it may also be used to secure the starter clutch to the flywheel. The screw is durable but exposed to high heat and constant wear, which means that it can become damaged or worn with regular use. If the screw is lost or damaged, it will need to be replaced. It should always be replaced with a genuine OEM part. This OEM muffler deflector screw is manufactured by Briggs & Stratton to exact standards and is compatible with several models of small engines. It can be used with various models of blowers, pressure washers, generators, and snow throwers from Toro, Murray, and Briggs & Stratton. It is sold as an individual replacement part. To replace this screw, the flywheel cover will need to be removed. Then, if it is still present, the old screw will need to be removed and the new one can be installed. This screw requires a hex or Torx screwdriver to install. Always wear gloves and disconnect the spark plug for safety when performing engine repairs.

Fix a stretched or broken starter rope spring with this friction spring. Prevents pulley damage and overstretching. Fits small engines on snow throwers, pressure washers, and generators. Easy DIY repair.

If your small engine won't start or has no spark, a faulty spark plug terminal may be the cause. This terminal connects the ignition coil to the plug.

This exhaust gasket is a genuine Midwest Engine replacement part for appliances operated by small engines, such as chipper shredders, snowblowers, leaf blowers, and lawn mowers. An exhaust gasket's purpose in the engine is to create a sealed layer between the carburetor and the exhaust tube to keep dirt and debris out of the infrastructure of the engine. A malfunctioning or broken exhaust gasket could compromise the seal between the carburetor and the exhaust tube, meaning that dirt and debris could get into the engine and cause damage. An exhaust gasket could be subject to damage from overuse and is generally known to require replacement over time from general wear and tear. If the exhaust gasket seal is compromised, it should be replaced immediately. Evidence of dirt and debris compromising an engine could take the form of oil leaking from the carburetor, black smoke pluming from the exhaust tube, and lower engine pressure than usual. This exhaust gasket is compatible with the following brands: Briggs and Stratton, Cub Cadet, and Toro. This part sold individually.

This spring brake is a genuine Midwest Engine part that can be used as a replacement part for outdoor appliances with small engines, including lawn mowers, chipper shredders, snowblowers, and other such appliances. Spring brakes are a braking system employed a large, coiled spring that is kept under high tension; the control valves attached to the spring brake are the mechanism by which the spring brake is released.If the spring brake has been damaged, is malfunctioning, or is in a state of disrepair, this will manifest in the form of a sudden, volatile eruption from the air brake chamber. This is a dangerous state for a small engine, so repair should be conducted immediately. Additionally, a new spring brake part should be ordered before any attempt to use the appliance without a proper repair. Remember to always wear gloves when handling, repairing, and operating outdoor equipment, and stay safe around the small engine of the appliance if the spring brake has malfunctioned and caused a dangerous situation.This spring brake is compatible with the brands Briggs and Stratton, Cub Cadet, and Toro.

This is a genuine OEM replacement air cleaner primer base for select Briggs & Stratton engines. The air cleaner base is installed on the engine to secure the air filter, which cleans debris from the air as it goes into the engine. Along with the cover, the air cleaner base provides a secure location and protection from the elements. Over time or during the course of other repairs, the base may become cracked or damaged, which could affect the operation of the air filter and the engine performance overall. This needs replaced as soon as possible to prevent further damage. This OEM air cleaner base is compatible with select engines manufactured by Briggs & Stratton, including those found on generators and lawn mowers. There are more than 150 machines that use this part from Toro, Simplicity, and Briggs & Stratton. This air cleaner primer base assembly includes the primer bulb and is sold as an individual unit. Allow the engine to cool completely and wear gloves when doing engine repairs.

Foam pre-cleaner prevents dust and debris from clogging your small engine's air filter. Replace seasonally or when worn to maintain airflow. Confirm fit.

This OEM air cleaner cover from Briggs & Stratton fits over the air cleaner and filter system, protecting the filters from excess dirt, debris, and other potential damage. This cover is also designed to help hold the air filter in place. The plastic housing is durable, but it can be subject to damage over time. This replacement is a snap-on cover, so no tools are required. Be sure to wear gloves when performing any kind of work on lawn and garden equipment. This air cleaner cover is designed to work with multiple types of lawn and garden equipment from Briggs & Stratton, Lawn-Boy, and Toro. It works with various engines on generators and lawnmowers, including hundreds of different specific models. It is sold individually and does not include the actual air filter or the bottom part of the housing.

This genuine Midwest Enginescrew can be used as a replacement part for appliances operated by small engines, including lawn tractors, lawnmowers, snowblowers, leaf blowers, vacuums, tillers, and pressure washers. The function of a screw on a small engine appliance is to fasten materials together through rotating such that the screw pierces into the materials to attach them. There are several reasons why a screw might have to be replaced. As they are a small part, screws might have to be replaced if they are lost or misplaced. These misplacements are a common occurrence for owners of small engine appliances while they do repairs. Additionally, screws may suffer damage over time in the form of rusting, stripping, erosion, or other deterioration and should be replaced if the damage hampers their ability to keep materials fastened to each other. Remember to always wear gloves when handling, repairing, and operating outdoor equipment. This OEM screw is compatible with the following brands: Midwest Engine, Briggs & Stratton, Toro, Cub Cadet, and Snapper. This part is sold individually.

An ignition key set is used with a variety of lawn and garden equipment. When it's turned in the ignition slot, it will start the lawnmower, pressure washer, or other equipment. This set comes with two keys and a keyring to make it less likely that one will be lost. Ignition keys sometimes become damaged or broken and some people lose them, which means a replacement set is required.If a set of keys is lost or has been damaged, a new set will be needed to operate a lawnmower or other equipment. There is no installation process involved, so there's no need for additional tools. Once the replacement ignition key set is acquired, it can be used to get equipment back up and running. Simply turn the key to engage the motor and the lawn equipment will be ready to use.This ignition key set is designed for use with lawnmowers, wood chippers, snowblowers, generators, tillers, and pressure washers. It is compatible with equipment from Briggs & Stratton, Simplicity, Craftsman, Snapper, Cub Cadet, and Murray. This is a genuine OEM replacement part that comes as an individual component that consists of two silver keys on a ring.

This authentic replacement item is a user's repair manual for Briggs & Stratton appliance engines. Whenever an operator has a problem with their appliance's engine, it's standard that they check the user's manual. It includes step-by-step directions for how to diagnose and then repair faulty parts. Many appliances use the same type of engine, so this manual is compatible with a wide variety of Briggs & Stratton products. It can also be used with some Toro and Lawn Boy engines as well. This product is sourced from the original manufacturer and ships individually. Any parts needed to make the repairs included in this manual will have to be purchased separately.