Need Help?
Call or text
Show parts
This replacement part is a manual lever. This is a genuine replacement part made by MTD. This part is sometimes also known as a PTO lever, which stands for power take-off. Pulling this lever is a method of taking power from a power source, generally an engine. A new manual lever might be needed if the current one is not working properly. If the power source is no longer connected to the lever, it is recommended that this part be replaced. Be sure the engine is powered off during this repair, as the user can become injured if safety precautions are not taken. Refer to the user manual for more instructions on this job. This is a genuine OEM replacement part. This part is sold individually and is sourced directly from the manufacturer.
Usually ships within 4 - 14 days
A hex screw fastens and holds two components together. It has a hexagonal head and features threading starting underneath the shoulder down to the tip. Its all-metal construction offers rigidity and longer lifespan. It is also threaded, so you can conveniently loosen or tighten in position. It measures 1/4-20 x 0.5 inch and comes in brass or gold color. Take note that this replacement hex screw may beused in different locations of a machine. Double check the device’s model number for compatibility. To install this hex screw, you will need a hex wrench or a hex socket. This hex screw is a replacement made by MTD. This screw/bolt may be used on lawn mowers, snowblowers, tillers, string trimmers, leaf blowers, edgers, chainsaws, pole pruners, log splitters, or wood chippers made by Craftsman, Toro, Cub Cadet, Ryobi, Troy-Bilt, Husky, Murray, Yard Machines, MTD, Huskee, Montgomery Wards, Bolens, Yard-Man, Turf King, or MasterCut. This OEM hex screw is sold individually.
A cotter pin, also known as a hitch pin, is used to secure pins and shafts in place. Meant for snowblowers, riding lawnmowers, and lawn tractors, this bow-tie shaped cotter pin has a double-end design making it easy to pull or push through either side of a pre-drilled hole. This pin snaps into a locked position without tension, keeping it secure during operation. Designed for lawn and garden maintenance equipment, this part ensures secure fastening. If the power equipment is used frequently, cotter pins may have to be replaced regularly so it would be practical to keep extra bow tie cotter pins on hand. It is highly recommended that work gloves be worn during the installation of this part. This part is compatible with Craftsman, Cub Cadet, Troy-Bilt, Murray, Yard Machines, MTD, Huskee, Bolens, Yard-Man, and MasterCut brands of lawn mower, snowblower, and log splitters. This is a genuine OEM replacement part that is sold individually.
This part is a replacement steering control handle grip. This is a genuine OEM part made by MTD and has been sourced directly from the manufacturer. This part's intended use is to replace a broken, worn, or lost steering control handle grip in lawn tractors.The steering control handle grip provides the user with comfort and cushioning when controlling the lawn mower. The handle grip should be replaced if lost, worn, or broken. When working on or near an engine, it's important to make sure the equipment is powered off and completely cooled down before starting any repairs. For more accurate information on how and where to install this steering control handle grip, reference the appropriate owner's manual and specific equipment diagrams.This is an authentic OEM replacement part made of high-quality materials. This steering control handle grip can be used with different models of lawn mowers that have been manufactured by MTD, Craftsman, Troy-Bilt, and other brands. Part sold individually.
Battery does NOT contain battery acid
This deck engagement cable is intendedd for use with many lawn tractor models. Another term for this part is a blade engagement cable. It pulls and pivots the belt idler pulley to tighten the belt and spin the cutting blades. If the owner notices any issues with the cable, such as the blades not engaging, they will want to have it replaced to ensure proper operation of the tractor.The cable is durable, but there is still the risk of damage. In some cases, the cable might snap or become kinked. Other times, the connectors could break or rust. Regardless, getting a replacement will help to ensure the machine's functionality. Tools needed to install this part include a 3/8-inch socket, 1/4-inch socket, and pliers.The deck engagement cable is compatible with some lawn tractor models from MTD, Troy-Bilt, Yard-Man, Cub Cadet. The cable is sold individually. It is a genuine OEM replacement part sourced from the manufacturer.
This part is a replacement engine pulley. This is a genuine OEM part made by MTD and has been sourced directly from the manufacturer. If the current engine pulley is broken or in any way damaged, this part can be used as a replacement. It is intended for use with lawn tractor models.The engine pulley enables the user to power on and use the lawn tractor by driving the equipment's transmission belt. This part attaches to the engine crankshaft and can become worn, corroded, jammed, or otherwise become defective. In this case, the engine pulley will need to be replaced. When working on or near an engine, always ensure that the equipment is powered off and completely cooled down before attempting to undergo any repairs. For more accurate information on how and where to install this engine pulley, the appropriate owner's manual and equipment diagrams should be referred to. This engine pulley is suitable for use on a variety of lawn tractor models manufactured by Craftsman, MTD, Troy-Bilt, and Cub Cadet. It is a genuine OEM part and thus is made of high-quality, durable metal. Part sold individually.
The Hex Head Self-Tapping Screw is an OEM part for MTD outdoor power equipment. This screw is designed to securely fasten components of your equipment, providing reliable and durable connections. The thread size is 5/16 inches for major diameter, with 18 threads. The screw is 3/4 inches long and has a hexagonal or six-sided head.
Over time, the Hex Head Self-Tapping Screw can become damaged due to corrosion, stripping of the threads, or wear from frequent tightening and loosening. This can compromise the integrity of the connections and potentially lead to equipment malfunction.
Symptoms of a bad Hex Head Self-Tapping Screw include:
This OEM replacement part is designed for use with various models of MTD outdoor power equipment.
This hex screw is an authentic OEM replacement part sourced directly from the manufacturer. It is used in many different applications in lawn and garden equipment and can be used on many different machines. If the hex screw is missing or loose due to deterioration, a new hex screw should be installed. Hex head screws are removed and replaced using a hex wrench. Screws are used to secure one part of a machine to another part. This hex head screw is not self-tapping, it is designed for pre-drilled holes. Most applications will require a washer and bolt to secure the screw, but there are applications where the screw is inserted into parts that do not have an opening on the other side and so the screw does not need to bolt. Wear gloves when working with screws and outdoor equipment. This hex head screw is made of hardened metal and is sold as an individual unit. This hex head screw can be used on many different model machines manufactured by MTD, Ryobi, Murray, YardMan, Bolens, Cub Cadet, and Husky.
This is a flanged lock nut. It’s designed to apply tension, typically on a joint that needs to have a certain amount of flex. As such, it’s mostly used on snowblower chutes and lawnmower handles. They can remain in place, but with a forgiving connection that can take a beating. The nut size is 3/8, with a thread size of 16. A lock nut will generally last for many years. However, the silicone ring inside will wear down if it’s frequently tightened and loosened. It needs to be replaced when it will no longer reliably remain in place. Generally, this begins as a symptom of slight slippage and worsens as time goes on. Thankfully, whether it’s being used on a snowblower or a lawnmower, this nut is generally straightforward to access. Simply unscrew the old nut, then screw the new nut on until it’s nice and tight. Our flanged lock nuts are genuine OEM MTD nuts, and they are sold individually.
This part is a replacement rod. This is a genuine OEM part made by MTD and has been sourced directly from the manufacturer. It is intended to replace a defective rod in lawn tractors.This rod is intended to help secure the lawn tractor's battery into position. If this rod is bent, dented, snapped, or rendered ineffective, the battery may become insecure, and the user may experience issues operating the equipment. Wear work gloves to protect the hands and check that equipment is powered off and cooled down before starting the repair process. For more accurate information on how and where to use this rod, the appropriate owner's manual and equipment diagrams should be referred to. This rod is a genuine OEM part made of durable metal and is sold individually. It is suitable for use with lawn tractor models that have been manufactured by MTD, Craftsman, Troy-Bilt, and other brands.
This part is a replacement battery tray. This is a genuine OEM part made by MTD and has been sourced directly from the manufacturer. It is intended to replace a defective battery tray in outdoor power equipment.This battery tray secures the battery in place to ensure it doesn't become detached or broken during equipment use. This part will need to be replaced when no longer effective, such as if dented, bent, or corroded. Wear work gloves to protect the hands and check that equipment is powered off and cooled down before starting the repair process. For more accurate information on how and where to use this battery tray, the appropriate owner's manual and equipment diagrams should be referred to. This battery tray is a genuine OEM part made of durable metal and is sold individually. It is suitable for use with outdoor power equipment that have been manufactured by MTD, Craftsman, Troy-Bilt, and other brands.
This three-pole switch is a genuine MTD part, sold individually. This three-pole switch can be used as a replacement part in a lawnmower. The purpose of a three-pole switch in a lawnmower is to regulate the electrical current distribution of one or more power sources directed to or away from the lawnmower. The three-pole switch might have to be replaced if sufficient damage occurs to the component to necessitate its removal. If this damage occurs, the switch should be removed and replaced by this genuine OEM replacement part. The switch should be removed and replaced in accordance with the proper instructions sourced from a relevant appliance manual. It is a simple replacement process that will require only basic tools to execute. Remember to always wear gloves when handling, repairing, and operating outdoor equipment. Always unplug the appliance before performing any kind of repair or replacement.This is a genuine OEM replacement part sourced directly from the manufacturer. It is sold individually. This three-pole switch is compatible with the following outdoor appliance brands: MTD, Craftsman, Troy-Bilt, Cub Cadet, Yard Machines, and Yard-Man.
When interlock switches are working properly, they will keep the engine from starting if there is no foot is not on the brake or if the parking brake is not set. When the switch breaks, it will not allow current to reach the starter even when the brake is on, which means the engine will not start. If the solenoid is not clicking when the ignition key on the tractor or mower is turned, the interlock switch is likely to blame. This is a genuine OEM replacement interlock switch that can help get a lawn tractor up and running again. Is is compatible with riding tractors and mowers from many different brands, including Craftsman, Bolens, Yard Machines, Yard-Man, MTD, and Troy-Built.
A flange lock nut, also known as a flange lock or a lock nut, is created to be used in various types of lawn and garden equipment. This flange lock nut holds other parts in place and, when properly threaded, will resist loosening. Over time, a flange lock nut may begin to weaken and may become loose or break. If it appears to be broken or weak, a replacement is required. Flange locks can be adjusted and uninstalled after use. When replacement is required, you may need a socket set, screwdriver, hacksaw, and butane torch. The socket wrench will loosen the bolt it is connected to, while the torch is used to heat the lock nut. A socket wrench may remove the nut, but sometimes cutting it with a hacksaw is required. This flange lock nut is a genuine OEM component directly from the manufacturer and comes in an individual unit. It is made of metal, a gold color, and can be found in various areas of lawn equipment. It works with lawnmowers, trimmers, snowblowers, cultivators, tillers, and leaf blowers by Poulan, MTD, Toro, Cub Cadet, Murray, Troy-Bilt, Bolens, Yard Machines, Craftsman, and Yard-Man.
This part is a replacement starter solenoid. This is a genuine OEM part made by MTD and has been sourced directly from the manufacturer. This part can be used to replace a defective or damaged solenoid in a variety of lawn tractor models.When the engine's ignition is turned on, the starter solenoid routes the electricity generated by the battery to the engine starter. This part will eventually need replacing if damaged or with regular equipment use. A wrench and screwdriver will be required to replace this part. It is always recommended that the appropriate safety precautions are adhered to when attempting to fix any power tools or machinery. When working on or near to an engine, ensure the equipment is powered off and completely cooled down before starting any repairs. For more accurate information on how and where to install this starter solenoid, the appropriate owner's manual and included diagrams should be referenced.As an authentic replacement part, this solenoid is suitable for use on several different models of lawn tractors manufactured by MTD, Troy-Bilt, Yard Machines, Cub Cadet, and Husky. This is a genuine part made of high-quality, durable materials and is sold individually.