Parts for Kitchenaid KOCE500EBS07: Microwave Door Parts

This inner oven door glass replaces damaged or cracked glass so your oven door looks and seals properly. It restores a clear viewing window and helps maintain proper cooking temperatures and safe operation. What it does:

• Replaces cracked, shattered, chipped, or fogged inner oven door glass
• Restores clear visibility into the oven cavity for safe monitoring of food
• Helps maintain the oven's internal temperature and proper door sealing
• Prevents heat loss and reduces risk of injury from broken glass

• Disconnect power to the appliance before starting any repair and allow the oven to cool completely.
• Handle glass with heavy gloves and protective eyewear to avoid cuts.
• Follow the oven's service manual or diagram for correct disassembly order and fastener locations.
• If mounting hardware or gaskets are damaged, replace them as needed.

This is a replacement outer oven door glass that restores the door's barrier and viewing window so you can monitor cooking while keeping heat contained. Replaces cracked or scratched outer glass to improve safety and appearance. What it does:

• Forms the outer glass surface of the oven door to help retain heat and protect internal components
• Provides a clear viewing window to check cooking progress without opening the door
• Stops drafts and prevents direct contact with inner door components when intact
• Commonly replaced when glass is cracked, chipped, fogged, or cosmetically damaged

• One outer oven door glass

• Disconnect power to the appliance before starting any repair and allow the oven to cool fully
• Handle glass with heavy-duty gloves and eye protection to avoid cuts
• Some repairs require removing door trim, screws, and brackets—retain fasteners for reassembly

This replacement door glass is the clear window panel in the appliance door. Replace it when cracked, shattered, or permanently clouded to restore visibility, appearance, and the structural integrity of the door assembly.

• Forms the viewing window in the door and completes the door's glass stack
• Replaces broken, cracked, scratched, or stained glass
• Can address rattling glass, sharp edges, or persistent cloudiness between panes
• Helps the door close securely after damage to the glass panel

• Disconnect power; turn off gas. Allow the appliance to cool completely before service
• Remove the door and place it on a padded surface; support the glass at all times
• Wear cut-resistant gloves and eye protection; handle glass only by the edges
• Transfer any model-specific brackets or trim from the old glass as required; do not overtighten fasteners

Seals the appliance door to prevent leaks and keep the interior working as intended. Replace a cracked, torn, or hardened gasket to stop leaks, reduce odor and mold, and restore a reliable door seal. What it does:

• Forms a tight seal between the door and cabinet to prevent water, air, or heat loss
• Stops common symptoms like visible cracks or gaps, water pooling, and persistent odors
• Restores proper containment for cleaning, heating, or washing cycles
• Matches the OEM channel/retainer design for a secure fit

• Disconnect power and water before beginning any repair
• Remove the old gasket, thoroughly clean the mounting area, then seat the new gasket into the door channel or retainer
• Work the gasket evenly around the door; avoid overstretching and ensure all beads/clips are fully engaged

This microwave door outer assembly replaces a damaged or broken door to restore the appliance's appearance and proper closure. It helps maintain the microwave cavity seal and allows the door latch and handle to function correctly. What it does:

• Replaces a cracked, dented, or cosmetically damaged outer door panel
• Restores proper door closure and engagement with the latch for safe operation
• Helps reduce light, steam, and food vapor escaping the cavity during use
• Improves the microwave's finished appearance and user access

• Disconnect power at the breaker or unplug the microwave before servicing
• Handle and latch components may be attached; verify correct alignment during reassembly
• Use appropriate tools and avoid forcing plastic clips to prevent damage

Color: Stainless

The Door Handle is an OEM part for Whirlpool microwaves. It is an external component consumers interact with frequently for opening and closing access to the microwave interior.

Causes of a bad door handle can include normal wear and tear affecting functionality over thousands of uses. Thin plastics or loose hardware holding the handle can deteriorate more quickly.

Symptoms of a bad door handle include:

• The handle no longer latches the door securely  
• Difficulty opening or closing the microwave door
• The handle coming loose or detaching completely
• Issues using locking/unlocking mechanisms

This OEM replacement Whirlpool door handle ensures smooth, dependable performance for the lifespan of the microwave. Its sturdy construction and precise fit maintain usability. This OEM part is also compatible with Maytag, Roper, Jenn-Air, Admiral, KitchenAid, and Frigidaire microwaves.
 

A small replacement button plug that fills a control-panel or console opening and restores a finished appearance. Keeps panels sealed and prevents debris from entering unused holes. What it does:

• Covers unused control holes or mounting openings on consoles and panels
• Helps block dust, moisture, and grime from entering appliance internals
• Restores a consistent, finished look to the control surface
• Useful when a damaged or missing plug leaves an exposed opening

• One button plug (black)

• Typically snaps into place from the front of the panel; no special tools usually required
• Ensure the cavity is clean and free of debris before installing for a secure fit
• If the plug sits near electrical components, disconnect power to the appliance before servicing
• Verify fit against the opening before final installation; slight trimming is not recommended unless specified

This factory screw secures appliance components to their mounting points. Replace missing, worn, or stripped hardware to restore a tight fit, proper alignment, and quieter operation across the affected assembly.

• Fastens panels, brackets, covers, or internal parts to the chassis or frame
• Helps maintain alignment and support, reducing rattle, vibration, or looseness
• Replaces missing or damaged screws that have backed out, broken, or stripped
• Restores secure mounting after service when original hardware is lost

• Disconnect power; shut off water or gas supplies before servicing
• Use the correct driver; start threads by hand to avoid cross-threading
• Match length and thread to the original location; do not substitute with longer hardware
• Tighten snugly; do not overtighten into plastic or thin metal

This factory fastener secures appliance components so panels, brackets, and handles stay tight and aligned. Replace a missing or stripped screw to stop rattles and keep assemblies firmly in place.

• Fastens appliance parts such as panels, brackets, trim, or hardware
• Replaces a missing, loose, or stripped fastener
• Helps eliminate vibration noise and wobbly components
• Restores proper alignment and secure mounting

• Disconnect power; for water- or gas-connected appliances, shut off supply lines before service
• Match length/thread to the original location; start threads by hand to avoid cross-threading
• Use the correct driver bit to prevent stripping the head
• Tighten snugly; do not overtighten into plastic or thin sheet metal