Search Results

Fix a warm fresh food compartment with this refrigerator evaporator fan motor. Restores air circulation to keep food fresh. Moderate difficulty repair.

Fridge not cooling evenly or freezer too warm? A failed evaporator fan motor stops cold air circulation. This motor assembly restores airflow fast.

This rotor assembly is the rotating half of your washer's direct-drive motor. It mounts to the rear of the tub and, working with the stator, spins the drum for wash and spin cycles to restore smooth operation.

• Couples with the stator to drive the inner tub during wash and spin
• Helps resolve no- or slow-spin complaints
• Can address a drum that won't turn or turns intermittently
• May reduce grinding/clicking from the rear caused by damaged rotor magnets

• Unplug the washer and turn off water supply before servicing
• Access from the rear; remove the center bolt and pull the rotor straight off the shaft
• Magnets are strong—keep fingers clear; align splines/keyway on reinstallation
• Tighten the center bolt securely and inspect the stator and sensor while open

Washer won't spin or shows LE error? A faulty stator assembly stops the motor from turning the drum. Moderate DIY repair restores spin and agitation.

Fix a microwave turntable that won't rotate with this motor replacement. Solves spinning issues when motor receives power but fails to turn the tray.

The Refrigerator Fan Motor Assembly is essential for maintaining optimal airflow in your Samsung refrigerator. This genuine OEM part ensures your appliance operates efficiently, providing consistent cooling throughout. Designed specifically for Samsung refrigerator models, it guarantees a perfect fit and reliable performance. The fan motor assembly effectively circulates cold air, helping to preserve your food's freshness and extend its shelf life. With its high-quality construction, this part offers durability and long-lasting functionality, reducing the need for frequent replacements. Installing the Refrigerator Fan Motor Assembly is straightforward, allowing you to restore your fridge's performance quickly and easily. Whether your current fan motor is malfunctioning or making excessive noise, this genuine OEM part is the ideal solution to enhance your refrigerator's efficiency and ensure a comfortable storage environment for your groceries.

A replacement fan (blower) that restores airflow in compatible Bosch appliances to support proper cooling and ventilation. Installs in the appliance's air path to help maintain temperature balance and reduce strain on other components. What it does:

• Circulates air through the appliance to support cooling and ventilation.
• Helps cool motors, heating elements, or evaporator areas depending on the model.
• Common symptom relief: reduces overheating, improves cooling performance, and can stop abnormal fan noise when the original fan fails.
• Prevents related faults caused by insufficient airflow when installed correctly.

• Always disconnect power to the appliance before starting any repair.
• Handle the fan blades and motor carefully to avoid damage; avoid forcing connectors or mounting points.
• After installation, test the appliance functions and listen for normal fan operation; if unusual noise persists, re-check mounting and clearance.

Fix a range cooling fan that won't shut off or makes howling noises with this motor. Requires removing oven from cabinet and back panel access.

Fix uneven cooling or warm spots in your fridge with this evaporator fan motor assembly. Restores proper airflow in 30-45 minutes with basic tools.

If your ventilation fan won't turn on or runs weakly, this blower motor restores airflow to clear smoke and cooking odors. Direct-fit replacement.

Microwave turntable won't rotate or makes loud rumbling sounds? Replace the turntable motor to restore smooth tray rotation and even heating.

A blower assembly that circulates oven or range heat to support convection cooking. Replacing a worn or failed blower restores airflow for more even cooking and reduces noisy or grinding fan operation. Sold individually. What it does:

• Circulates hot air across the oven cavity to support convection and temperature consistency.
• Restores airflow that helps prevent uneven cooking or extended bake times when the blower fails.
• Common symptoms of failure: loud or grinding noise, little or no airflow from the convection fan, or reduced baking performance.
• Replaces assemblies that are worn, seized, or producing excessive vibration.

• Disconnect electrical power (and gas supply, if applicable) before starting any service.
• Allow the appliance to fully cool; remove access panels to reach the blower.
• Handle fan blades carefully to avoid damage; verify the blower spins freely and wiring connectors are secure before reassembly.

Fixes washer not spinning fast enough or motor failure. This 2-speed direct drive motor restores proper agitation and high-speed spin cycles. Moderate DIY.

Fixes weak or no ice dispensing. This auger motor drives the dispenser auger to move ice from the bin to the chute. Moderate DIY repair for most users.

Tangential blower that moves air through the oven's ventilation and control areas to help keep components cool and vent heat. Replacing a failed blower restores airflow for quieter operation and more consistent cooling around electronics. What it does:

• Circulates air across the oven vent and control area to dissipate heat; symptoms of failure include little or no airflow.
• Helps cool control electronics and nearby components; failure can cause high temperatures or thermal-related shutdowns.
• Reduces noisy or rough fan operation when bearings or motor wear.
• Supports proper venting after use to help the appliance cool down safely.

• Disconnect power to the appliance before accessing or replacing the blower.
• Allow the appliance to cool fully; remove access panels to reach the blower.
• Handle the blower and connector gently to avoid damaging the motor shaft or wiring; ensure correct orientation when reinstalling.

This blower motor moves air through the dryer to help vent heat and moisture so clothes dry efficiently. Replaces a worn or failed blower motor to restore proper airflow and drying performance. What it does:

• Spins the blower wheel to force air through the drum and exhaust vent
• Restores normal airflow when the dryer has little or no air movement
• Helps stop rattling, squealing, or grinding noises caused by a failing motor
• Helps reduce long dry times and overheating caused by restricted or weak airflow

• One blower motor

• Disconnect power to the appliance before starting any repairs
• Installation typically requires removing the dryer front or rear panel and accessing the blower housing
• Inspect the blower wheel and housing for lint or damage while replacing the motor