Parts for Frigidaire FFTW4120SW: 04 - Motor / Tub Parts

This replacement housing cover protects internal appliance components and restores the cabinet appearance. It keeps wiring and components enclosed to help maintain safe, normal operation and prevent debris from entering sensitive areas. What it does:

• Replaces a damaged or missing housing cover to protect internal parts
• Helps keep dust and debris out of electrical and mechanical components
• Restores a secure enclosure to reduce rattling or exposed wiring
• Supports proper airflow paths by closing open openings

• Disconnect power to the appliance before starting any repair
• Handle the cover carefully to avoid cracking plastic tabs or fasteners
• Align mounting tabs or screw holes, then secure with the original fasteners

A molded balance ring that helps stabilize the washer tub and reduce vibration during spin cycles. Replaces a worn or damaged ring to restore smoother, quieter operation and help prevent excessive wobbling. What it does:

• Cushions and balances the outer tub to minimize spin-cycle vibration and rocking
• Helps keep the inner tub centered for smoother, more even spins
• Common symptom: loud or uneven spinning, excessive shaking, or movement during high-speed spin
• Works with the washer's suspension system to reduce wear on other components

• Disconnect power (and water if applicable) before starting any repair
• Support the tub and follow the washer's service manual for safe disassembly
• May require removing the cabinet/top and access panels to reach the tub

This tub assembly with attached tube replaces a damaged or leaking washer tub to restore the washer's water containment and circulation. Designed to fit as the main wash tub and provide a secure channel for internal water routing. What it does

• Replaces a cracked, punctured or badly corroded tub that causes leaks.
• Restores proper water containment so the machine can fill and wash without spilling.
• Re-establishes the internal tube path used for water circulation or drainage.
• Helps reduce noise and vibration caused by a damaged tub.

• One tub assembly with attached tube.

• Disconnect power and shut off the water supply before beginning service.
• Installation may require removing the cabinet, drive components, or other panels; follow the OEM service manual steps.
• Inspect mounting gaskets, seals and fasteners during installation and replace if worn.

The Motor is an OEM component specifically designed for Frigidaire washing machines. It is responsible for powering the spinning wash and rinse cycles during operation. 

Symptoms of a bad motor can include:

• The washer not agitating or spinning clothes 
• Loud grinding/clicking noises from the motor area
• Vibration or imbalance during spin cycles
• Error codes related to motor operation

Causes of a bad motor can be wear over time, moisture damage if leaks occur inside the washer tub, or failure of internal windings and electronic components. 

Replacing with this OEM motor ensures full cycle functionality is restored. It is built to withstand constant load stress while moving clothes adequately during all selected cycles.

This OEM Frigidaire replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models. Replace yours today before further damage occurs.
 

This rubber cushion is a small replacement bumper that cushions contact and reduces vibration and noise on the appliance. It helps protect surfaces and prevents parts from rubbing or rattling during normal use. What it does:

• Acts as a shock absorber to reduce vibration and noise
• Cushions moving parts or panels to prevent metal-on-metal contact
• Helps maintain proper spacing and alignment where mounted
• Commonly replaces worn or missing bumpers that cause rattling or vibration

• One rubber cushion/bumpper

• Install in the original mounting location; confirm orientation before pressing into place
• Use gentle pressure to seat the cushion; no special tools typically required
• Disconnect power to the appliance before working near electrical components
• Replace any fasteners or clips that are damaged; do not force the part into a damaged mounting point

The Shift Actuator is an OEM part for Frigidaire top-loading washers. Located internally, it controls gear shifting between wash cycles of different spin speeds.  

Symptoms of a failing shift actuator include:

• Inability to advance wash cycles or complete programmed cycles 
• Excessive noise and vibration from improper gear engagement
• Draining or spinning issues related to restricted movement

Causes may involve normal wear over thousands of cycle shifts. Exposure to mineral buildup or moisture entry could lead to actuator corrosion.

This OEM Frigidaire part is also compatible with Electrolux, Gibson, Kelvinator and some Kenmore models.

The clutch body is an OEM part for Frigidaire washing machines. The clutch body ensures a smooth transition between the agitating and spinning actions, a key aspect of the washing process.

A failing clutch body in a washer is often due to normal wear and tear, overloading of the machine, or mechanical issues such as misalignment. These factors can lead to reduced efficiency in the spin cycle, impacting the overall washing performance.

Symptoms of a bad clutch body include:

• The washer struggles to switch from agitate to spin cycle.
• A noticeable decrease in spin speed, leaving clothes wetter than usual after a cycle.
• Unusual noises during the spin cycle, indicate mechanical distress.
• The washer may stop abruptly during the spin cycle.
• In some cases, the machine may fail to spin at all.

This Frigidaire OEM replacement part is also compatible with Electrolux, Gibson, Kelvinator, and some Kenmore models.
 

The Drain Pump is an OEM component for Frigidaire washing machines. Located near the bottom of the washer tub, this electric pump swiftly removes water after each cycle.

Causes of a bad drain pump can include sediment buildup inhibiting spin or overloaded machines straining motor function over time. 

Symptoms of a bad drain pump include:

• Failure to fully evacuate water at the end of cycles  
• Prolonged drain times with excess residual water
• Buzzing or grinding noises from the pump during operation

This OEM Frigidaire part can also be used on Electrolux, Frigidaire, Gibson, Kelvinator, Westinghouse, and Sears/Kenmore.