Parts for Husqvarna YTH1842-917223810: Mower Lift Parts

This lift shaft assembly is a genuine Husqvarna part, sold individually. This lift shaft assembly can be used as a replacement part in a lawn mower. The purpose of the lift shaft assembly in a lawn mower is to facilitate the raising and lowering of the deck so that the operator can set it to the correct, appropriate height for standard use of the appliance.The lift shaft assembly might need to be replaced if the component no longer functions or has suffered damage that has reduced its functionality in raising and lowering the deck of the lawn mower. If the lift shaft assembly is damaged or malfunctioning, the component should be removed and replaced by this genuine OEM replacement part in accordance with the proper instructions from a relevant appliance manual. It is a simple replacement process that will require only basic tools to properly execute.This is a genuine OEM replacement part sourced directly from the manufacturer. It is sold individually. This lift shaft assembly is compatible with the following outdoor appliance brands: Husqvarna, Craftsman, Poulan, Ariens, and Dixon.

This right hand lever assembly is a genuine Husqvarna part, sold individually. This right hand lever assembly can be used as a replacement part for a lawn mower or a lawn tractor. The purpose of the right hand lever is to manage the self-propel feature of the appliance so the appliance can be easily operated by the user.If the right hand lever is punctured, scraped, or eroded to the point that it cannot be engaged in order to use the self-propel feature, the component should be removed and replaced by this genuine OEM replacement part. Remember to always wear gloves when handling, repairing, and operating outdoor equipment. This is an OEM part sourced directly from the manufacturer. It is sold individually. This right hand lever assembly is compatible with the following outdoor appliance brands: Husqvarna, Craftsman, and Poulan.

This no grease mandrel assembly is the part that houses the shaft where the mower blade attaches. It is mounted to the deck of the mower by three bolts, which are sold separately. The mounting holes on the mandrel housing are not threaded, but the bolts used to secure the mandrel to the deck are self-tapping. If the lawnmower is no longer providing an even cut, there may be a problem with the mandrel assembly. A broken or damaged mandrel assembly can severely reduce the mower's cutting performance. Replace it as soon as possible. The mandrel shaft goes through the deck, and the pulleys are attached to them, then the belt that drives the mandrels is placed in the pulleys. A spacer must be installed under the pulley. Failing to use a spacer or installing it on top of the pulley will result in damage to the shaft and pulley. This mandrel assembly is compatible with Ariens, Craftsman, Husqvarna, Poulan, and Weed Eater lawn mower models. It is an OEM part sourced directly from the manufacturer and is sold individually. The mandrel assembly includes a housing, shaft assembly, bearing, and nut only; the pulley/washer and blade bolt/washers are not included.

This replacement part is a grip handle. This is a genuine replacement part made by Husqvarna. This grip handle allows the user to have a stronger and more secure grip while maneuvering the machine to the desired areas. A new grip handle might be needed if the current one is missing or damaged. If the handle is not up to working condition it might not feel comfortable to hold. This might mean that the user will not be able to maneuver the machine. If this is the case the grip handle should be replaced as soon as possible. The repair should be fairly easy and only require common household tools. This grip handle is sold individually and is sourced directly from the manufacturer. This part is a genuine OEM replacement part to ensure proper fit and long-lasting use.

This bow tie cotter pin is a manufacturer part designed to replace the original on select riding lawn mowers. The cotter pin has many applications, depending on the exact model of tractor, but typically acts as an anchor. The pin is installed in a drilled hole or small shaft on a bolt or axle and then the sections of the pin are spread to keep the assembly in the perfect position and hold everything together. These pins allow for some flexibility, but that also makes them subject to damage or breakage because of vibrations and other issues. This genuine cotter pin fits over 150 tractors from brands like Jonsered, Husqvarna, Weed Eater, Poulan, and Craftsman. Pliers may be required to replace this part. Always wear gloves and eye protection for added safety and disengage the engine before beginning any repairs. This cotter pin is sold as a single unit and does not include any additional components or hardware.

This replacement part is a spring. Springs create torque and ensure that components remain secure during equipment use.Due to the amount of pressure they experience during use, springs can snap over time. If a spring has become loose and no longer holds enough tension, it should be replaced.This is a genuine OEM replacement part manufactured by Husqvarna. This part is sold individually.

Attaching to the front lift link, this washer is a component for use with lawn tractors. A washer is a component that is used with a screw fastener. Its purpose is to keep the screw from loosening by distributing the load over a larger area. A new washer may be needed if the user has mistakenly misplaced the original. When dealing with small parts, it's a good idea to place them in a container so that they are not lost. The washer could physically break over time due to normal wear and tear. If this is the case, it will need to be replaced so that the screws do not loosen. The repair person may choose to wear gloves to protect his or her hands during the replacement process.This washer is sold individually. It is an OEM part that is sourced directly from the manufacturer. It's compatible with lawn tractors that are manufactured by the Husqvarna, Poulan, and Craftsman brands.

This screw is a common piece of hardware and serves as a replacement for those that are lost, damaged, or missing. It can be used for a range of machines, but it is typically used with lawnmowers and tractors as a means to fasten elements together and to reduce vibration.Although screws are meant to last, they can wear down and break over time. They may also become corroded from the elements. When repairing the machine, there is also the risk that the screws may be lost. Regardless of the problem with the screw, it will need to be replaced before the machine can be operated. The process is usually straightforward, but this can vary based on the location of the screw.The screws can be used with many models of lawn mowers and tractors from Husqvarna, Poulan, Ryobi, Weed Eater, and Jonsered. This is a genuine OEM replacement part sourced from the manufacturer. The screw is sold individually.

This is a lawnmower shaft, which is often called a lawnmower deck lift link or lift link assembly. The lawnmower shaft connects the blade to the motor. A new lawnmower shaft may be needed if the original is cracked, broken, or damaged in any way. The lawnmower shaft can be easily bent or broken if it impacts a hard object, such as a tree stump, rock, landscaping block, or curb. It is essential to use extreme care when performing maintenance or replacing any parts near the blade of a lawnmower. Make sure the machine is fully cooled and turned off before attempting any work on the unit.This lawnmower shaft is a genuine OEM Husqvarna part. It is sold individually. This particular lawnmower shaft is compatible with lawnmowers that are manufactured by Husqvarna, Poulan, Poulan Pro, Roper, Craftsman, and Weed Eater.