Parts for Kenmore 795.79439218 (79579439218, 795 79439218): Other Parts

This hinge bolt secures the hinge to the appliance cabinet or door, keeping alignment true and motion smooth. Replacing a stripped, missing, or corroded bolt helps restore proper door operation and reliable closing.

• Fastens the hinge to support and stabilize the door
• Helps maintain alignment for smooth opening and closing
• Replaces damaged, stripped, or missing hardware

• Disconnect power to the appliance; shut off water supply if applicable
• Support the door to prevent strain on remaining hardware; enlist a second person if needed
• Note the order/orientation of any shims or washers and transfer them during reassembly
• Start threads by hand to avoid cross-threading; tighten securely without overtightening

This customized screw secures internal or external appliance components to restore proper fit and reduce movement. Use it to replace missing or damaged fasteners so panels and assemblies stay firmly attached during normal operation. What it does:

• Fastens panels, brackets, or small assemblies to maintain structural stability
• Prevents rattling, vibration noise, or loose trim caused by missing screws
• Restores correct alignment where a stripped or damaged screw allowed movement
• Works as a direct replacement for the matching screw specified for the repair

• One screw

• Disconnect power and water supply before starting any repair
• Use the correct screwdriver or bit to avoid stripping the head
• Tighten securely but do not overtighten to prevent thread damage
• Keep small parts away from children and retain any removed hardware for reuse if needed

This customized screw is the manufacturer-specified fastener used to secure appliance components and panels at their mounting points. Replace a missing, stripped, or corroded original to restore a tight fit, proper alignment, and help eliminate vibration or rattling.

• Secures brackets, covers, and panels to the chassis at designated mounting points
• Maintains alignment and stability of the assembly during operation
• Helps address loose or rattling components caused by a missing or damaged fastener
• Direct replacement for the original fastener used in the specified location

• Disconnect power; shut off water before servicing
• Match head/length to the original; transfer any original clips or washers if used
• Start threads by hand to avoid cross-threading; use the correct driver bit
• Tighten until snug—do not overtighten into plastic or thin sheet metal

This is a genuine replacement mounting screw designed to secure appliance panels and internal components, restoring proper fit and stopping movement. Fits specified LG assemblies where the original screw is missing or damaged. What it does:

• Secures panels, brackets, or small components to prevent rattling and misalignment
• Restores proper attachment when original screw is stripped, lost, or broken
• Helps eliminate vibration noise caused by loose fasteners
• Matches OEM fit and thread form for reliable reassembly

• One mounting screw

• Disconnect power and water before beginning any service
• Use the correct driver and do not overtighten to avoid striping threads or cracking components
• Keep removed screws organized to ensure correct replacement locations
• If threads are damaged, replace mating clip or insert as recommended by OEM

This replacement screw secures specified panels or components inside your appliance. Refreshing worn or missing hardware helps restore a tight fit, reduce rattling, and keep assemblies properly aligned for reliable performance.

• Provides secure fastening for brackets, panels, or internal assemblies
• Replaces stripped, rusted, or lost hardware
• Helps reduce vibration and rattling noises
• Symptoms include loose panels, shifting components, or a screw that won't tighten

• Disconnect power and allow any hot surfaces to cool before servicing
• Wear cut-resistant gloves and eye protection
• Match length and thread to the original; replace like-for-like
• Start threads by hand to avoid cross-threading; do not overtighten

This replacement mounting screw secures appliance panels and components to restore proper fit and reduce rattling or loose parts. Simple, direct replacement when a worn or missing screw causes loose panels or intermittent contact. What it does:

• Fastens panels, brackets, or small components to maintain proper alignment and reduce vibration
• Prevents loose trim, covers, or assemblies that can cause noise or improper sealing
• Replaces missing, stripped, or corroded screws that interfere with reliable operation
• Works wherever the OEM screw specification is required for secure mounting

• Use the matching screw hole and tighten until snug; avoid over-torquing to prevent stripping
• Disconnect power to the appliance if accessing electrical or moving parts near the work area
• If multiple screws are missing or panels are damaged, replace all fasteners for even support

The Drain Tube Assembly is an OEM part for LG refrigerators. This drain tube assembly is responsible for directing condensation and melt water that accumulates in the refrigerator away to the evaporator pan.

Causes can include cracks developing from limescale or mineral accumulation, flexing fatigue from repeatedly catching drips, or damage from improper cleaning methods.

Symptoms of a bad drain tube assembly include:

• Puddles or leaks developing underneath the refrigerator
• Poor air flow from vents and higher temperatures
• Ice or moisture buildup in refrigerator walls and seals
• Water stains or corrosion appearing inside the unit

This OEM LG part is also compatible with some Kenmore models.

This adjustable leveling leg assembly supports and stabilizes the refrigerator. Replacing a worn or damaged leg restores proper leveling, reduces vibration and noise, and helps doors align and seal correctly.

• Provides height adjustment at the cabinet corner to level the appliance on uneven floors
• Helps prevent rocking, rattling, and excessive vibration
• Promotes proper door alignment and gasket sealing
• Replace if the foot is broken, missing, bent, or the threads are stripped and won't hold adjustment

• Disconnect power and turn off the water supply before servicing
• Protect the floor; with a helper, carefully tip and support the refrigerator
• Unscrew the old leg; hand-thread the new leg, then fine-tune height with a wrench until level
• Ensure both front legs share the load evenly and recheck door operation

A replacement control case assembly that houses the appliance's electronic controls and front control components, restoring a secure mounting point and clean exterior for the control board and user interface. Designed to replace a cracked, broken, or worn control housing. What it does:

• Secures and protects the control board and associated wiring inside the appliance
• Provides the front mounting and alignment for the user interface, buttons, or touchpad
• Prevents movement or vibration-related damage to controls that can cause erratic operation
• Improves the appearance and usability when original housing is cracked, warped, or missing

• Turn off and unplug the appliance (or shut off power at the breaker) before beginning service.
• Handle the control board and connectors carefully to avoid ESD or connector damage.
• May require removal of the front control panel, trim, or fascia; retain screws and fasteners for reassembly.

The Shelf Assembly is an OEM component for LG refrigerators. It comprises adjustable glass shelves that fit inside the refrigerator and freezer compartments. These shelves provide flexible storage and organization options for various food items. 

Causes of a bad shelf assembly can include cracks or chips in the glass that compromise the structural integrity. Overloading shelves beyond their weight limit can also lead to damage over time. 

Symptoms of a bad shelf assembly include:

• Sagging or bowing shelves unable to hold weight 
• Shelves breaking or snapping at their mounting points
• Missing anti-tip brackets or rail clips

This OEM LG shelf assembly is compatible with many Sears/Kenmore side-by-side refrigerators as well as select GE, Samsung, and Frigidaire refrigerators.

The Shelf Assembly is an OEM part for LG refrigerators. This part offers support and optimal organization for your refrigerated items. This part maximizes the storage capacity of your refrigerator, providing a stable platform for food and beverages.  

Causes for issues with the shelf assembly often involve overloading the shelf beyond its weight capacity, accidental damage from dropping heavy items, or material fatigue from years of use.

Symptoms of a malfunctioning Shelf Assembly include:

• Cracks or breaks in the shelf that compromise its structural integrity
• Difficulty fitting the shelf properly into its designated slots
• Warping or bending under weight, indicating a loss of strength

This OEM LG part is also compatible with some Kenmore models.

This freezer shelf assembly restores a stable, level surface for storing frozen foods. Replace a cracked or missing shelf to regain usable space, keep items organized, and help prevent tipping inside the freezer compartment.

• Provides a sturdy storage surface in the freezer compartment
• Direct replacement for a damaged, cracked, or missing shelf assembly
• Helps keep items level and organized for easier access
• Seats into the factory shelf supports for a secure fit

• Remove items from the area before removing/installing the shelf
• Handle carefully; edges can be sharp—wear cut-resistant gloves
• Align with side supports and slide or set into place until fully seated
• Do not force; inspect/replace damaged supports before installing the new shelf

This small control knob mounts on the shutter mechanism so you can open, close, or fine-tune the setting with a simple turn. Replace a cracked, loose, or missing knob to restore smooth adjustment and a clean, finished look.

• Attaches to the shutter/damper shaft to select positions
• Provides a secure grip for easy, precise adjustment
• Common failure signs: cracked or stripped hub, loose fit, missing knob
• May cause difficulty adjusting the shutter or settings to slip

• Disconnect power if removing any covers or panels near electrical components
• Pull the old knob straight off; rock gently if stuck to avoid damaging the shaft
• Align the keyed/D-flat opening with the shaft and press firmly until fully seated
• The shutter moves smoothly through its full range

This shutter knob attaches to the crisper cover's humidity vent (shutter) and lets you open or close the airflow for produce storage. Replace a cracked or missing knob to restore smooth, precise adjustment of the drawer's vent. What it does:

• Connects to the shutter lever to adjust the vent position on the drawer cover
• Restores the ability to regulate airflow and moisture in the crisper
• Helps ensure the vent moves and stays in the selected setting
• Symptoms may include a broken or missing knob, a vent stuck in one position, or inability to adjust humidity

• 1 shutter knob

• Unplug the refrigerator before servicing; remove the crisper/drawer cover for access if needed
• Pull the old knob straight off the shutter shaft; align flats/tabs and press the new knob on until fully seated
• Do not force the knob—inspect the shutter lever for damage if it won't engage
• Verify smooth vent movement, then reassemble the cover and drawers

The Vegetable Tray is an OEM part for LG refrigerators. This part provides a designated space within the refrigerator to store fresh vegetables, keeping them organized and easily accessible.

Causes of a bad vegetable tray can stem from excessive force when opening and closing the drawer, moisture buildup causing swelling or deterioration of the plastic material, or general aging and brittleness over time.

Symptoms of a bad vegetable tray include:

• Cracking or breakage due to wear and tear
• Warping or discoloration from exposure to moisture and temperature changes
• Difficulty sliding the tray in and out due to damage or misalignment

This OEM LG part is also compatible with some Kenmore models.

This cover assembly replaces a damaged or missing cover panel in the designated location of your appliance. It restores proper protection and fit, helping shield components and maintain intended airflow where the original cover has cracked or loosened.

• Protects internal components and wiring from dust, moisture, and accidental contact
• Maintains manufacturer-designed airflow/venting through the cover area
• Restores secure mounting and a clean, finished appearance
• Typical symptoms: cracked or broken cover, missing tabs, loose or rattling panel, or airflow obstruction at the cover location

• Disconnect power to the appliance before servicing
• Remove retaining screws/clips and keep hardware for reuse
• Transfer any clips, seals, or sensors from the original cover if applicable; seat the new cover fully
• Tighten fasteners snugly without overtightening to avoid cracking plastic; ensure vents are unobstructed and the panel is secure

This supporter is a small mounting support used to secure and stabilize internal components, helping keep parts aligned and reducing vibration for quieter, more reliable operation. It restores proper fit where worn or damaged supports cause movement. What it does

• Holds and stabilizes a specific internal component or assembly to maintain proper alignment
• Reduces vibration and rattling caused by loose or broken supports
• Helps prevent wear from parts rubbing or shifting out of place
• Common symptoms it can address: unusual noise, wobble, or component misalignment

• One supporter mounting support

• Disconnect power to the appliance before beginning any work
• Access may require removing panels or assemblies—keep track of fasteners
• Inspect surrounding clips and fasteners and replace any that are damaged

This cover support bracket secures an appliance cover or panel, restoring proper alignment and stability. Replacing a damaged support helps eliminate rattles and gaps so the cover seats correctly and stays in place.

• Provides structural support for the associated cover/panel
• Keeps the cover aligned and firmly seated against the cabinet
• Replaces a cracked, stripped, or missing support
• Symptoms include a loose or sagging cover, vibration/rattling noises, or covers that won't stay attached

• Disconnect power before servicing; allow any hot surfaces to cool and wear cut-resistant gloves
• Remove the cover/panel to access the support and retain all mounting hardware
• Install the new support, transferring screws or clips as needed
• Reinstall the cover and verify proper fit before restoring power

This tempered-style glass shelf replaces a cracked, broken, or missing refrigerator shelf to restore usable storage and keep food organized on a stable, easy-to-clean surface. Fits into existing shelf rails and supports everyday items. What it does:

• Provides a flat storage surface for containers, produce, and packaged food
• Restores lost storage space and helps prevent items from falling through broken shelving
• Helps contain small spills for easier cleanup
• Slides into existing shelf supports—serves the same function as the original glass shelf

• Remove food and sliding bins from the shelf area before installing
• Handle with care—wear gloves and eye protection when moving glass
• Align edges with the refrigerator shelf rails and slide straight in until fully seated
• If glass is damaged or cracked, discard safely and clean any debris before installing the replacement

The Glass Shelf is an OEM part for LG refrigerators. This shelf is designed to provide a sturdy and reliable surface for storing food and beverages within the refrigerator.  

Causes of a bad glass shelf can include cracks or shattering due to heavy loads, accidental impact, or thermal stress from temperature changes within the refrigerator.

Symptoms of a bad glass shelf include:

• Visible cracks or chips in the glass
• The shelf not fitting properly or becoming unstable
• Difficulty in sliding or adjusting the shelf
• Items tipping or falling over due to an uneven surface

This OEM LG part is also compatible with some Kenmore models.

This replacement Fresh Room tray restores the shallow bin area inside your refrigerator's Fresh Room compartment, giving you a sturdy spot to organize deli items and snacks. Replace a cracked or missing tray to maintain proper fit and daily convenience.

• Forms the Fresh Room compartment tray that holds small items like meats and cheeses
• Helps keep contents organized and supported under the existing cover/shelf
• Restores proper seating and alignment within the compartment
• Common signs you need this part: cracked plastic, broken tabs/edges, tray won't seat, falls out, or is missing

• Empty the compartment and remove the old tray by lifting/tilting as your model allows
• Align the new tray with the existing guide tabs/rails and slide or press it fully into place
• Handle plastic parts carefully; avoid forcing or flexing to prevent damage
• If removing shelves or lighted covers near the work area, disconnect power for safety

This door gasket assembly seals the refrigerator door to the cabinet, keeping cold air in and humid room air out. Replace a torn or deformed gasket to restore a tight seal, stable temperatures, and reduce frost or condensation.

• Creates an airtight seal around the door perimeter
• Helps maintain proper temperatures and consistent cooling
• Reduces warm-air leaks that lead to frost or condensation
• Common symptoms: torn/warped gasket, visible gaps, door not closing flush, or temperature swings

• Disconnect power before servicing
• Let the new gasket warm to room temperature; use warm water or gentle low heat to relax folds—do not overheat
• Remove the old gasket and press the new gasket fully into the door channel, ensuring corners seat properly
• Close the door and check contact all around; work the gasket as needed until it seals evenly

This is a door basket for refrigerators. The purpose of a door basket is for additional storage and organizing within refrigerators unit. These are manufactured out of a clear plastic material. These door baskets are very easy to replace and simply slide in and out of the fridge. The entire replacement process takes less than 15 minutes to complete.A new door basket may be needed if the original is cracked, broken, or damaged in any way. Over time, the clear plastic may begin to get brittle after being in cold temperatures. If the clear plastic begins to discolor, the user may wish to replace the door basket for cosmetic purposes.This door basket is a genuine OEM LG part. It is sold individually. This specific door basket is compatible with refrigerators that are manufactured by the LG brand and the Kenmore brand.

This refrigerator guide aligns and supports a mating component so it travels smoothly and stays on track. Replacing a cracked or missing guide restores proper movement and helps prevent binding, jamming, or premature wear.

• Guides and stabilizes the movement of the associated part to ensure smooth travel
• Keeps components aligned to prevent rubbing, derailment, or gaps
• Common signs of failure: sticking or binding, wobbling/misalignment, or parts coming off track
• Visible damage such as cracks, broken tabs, or missing pieces on the guide

• Disconnect power; if working near a dispenser or water path, turn off the water supply
• Remove the access panel/bin as needed and retain any screws/clips
• Seat the new guide and reuse existing hardware; verify a secure fit
• Restore power and test the component's movement for smooth operation

This door stopper limits and cushions the appliance door's travel to prevent overextension and damage to hinges or surrounding surfaces. Replacing a worn or broken stopper restores smooth, controlled door movement and consistent closing alignment.

• Limits door opening angle and provides a positive stop to prevent overextension
• Helps protect hinges and adjacent panels from impact or scuffing
• Promotes smoother opening/closing and more consistent door alignment
• Symptoms of a failed stopper can include over-swing, scraping/rubbing, clicking noises, or a loose "stop" feel

• Disconnect power to the appliance before servicing
• Open the door to access the stopper; support the door if necessary
• Remove the fastener/retainer, note the old stopper's orientation, and install the new stopper using existing hardware
• Slowly open and close the door to verify the stop action and clearances after installation

This small stopper fits inside the handle assembly to limit travel and keep the handle properly seated. Replacing a worn or missing stopper restores a solid, secure feel when opening and closing your appliance.

• Provides a positive stop for handle movement
• Helps keep the handle aligned and seated against its mounts
• Replaces a cracked, deformed, or missing stopper
• Common signs: handle feels loose or wobbly, over-rotates, or shifts/clicks during use

• Unplug the appliance before servicing to prevent injury
• Support the handle and protect the finish while removing fasteners
• Note the original stopper's orientation and install the new one the same way
• Tighten fasteners evenly; do not overtighten to avoid damaging plastic or finishes

A replacement door gasket assembly that restores a tight refrigerator door seal to help maintain interior temperature and reduce energy loss. Fits specific LG refrigerator doors; replaces torn, cracked or hardened gaskets. What it does:

• Seals the door edge to keep cold air in and warm air out
• Helps stop frost buildup, condensation, and uneven cooling
• Reduces compressor run time caused by air leaks
• Prevents food spoilage linked to poor door sealing

• One door gasket assembly

• Disconnect power and empty the door before starting the repair
• Clean the gasket channel and mating surface before installing the new seal
• Align the gasket evenly around the door; avoid forcing or stretching

The Door Basket is an OEM accessory specifically designed for LG refrigerator doors containing vegetable drawers. This hanging basket provides auxiliary storage directly above crisper bins.

Causes of a bad door basket can include wear and tear over time compromising the mesh material, or damage from overloading reducing structural integrity.  

Symptoms of a bad door basket include:

• Holes or tears reducing usable capacity   
• Detached fasteners slipping off mounting brackets
• Warped contours no longer remain properly installed
• Insecure attachment inhibiting safe door openings  

Replace yours today with this genuine OEM LG basket to maximize organizational convenience. Sturdy brackets produce a snug, stable fit. Compatible with Samsung, GE, and Frigidaire refrigerators featuring dual-drawer doors, this upgrade complements any modern kitchen setup. Reliable performance preserves aesthetic appeal.

The Door Basket is an OEM part for LG refrigerators. It is a convenient storage solution located on the door, designed to hold smaller items such as condiments, bottles, or jars. This basket allows for easy access and organization, making it simpler to find and retrieve items stored within the door.

Causes of a bad part can include repeated impact or mishandling, exposure to excessive weight or force, or general wear and tear over time.

Symptoms of a bad Door Basket include:

• Cracks or damage to the basket itself
• Difficulty sliding the basket in and out of the door
• The basket becoming detached or falling out of the door
• Excessive wear or loosening of the mounting hardware

This OEM LG part is also compatible with some Kenmore models.

The Door Basket is an OEM replacement part for LG refrigerators. It hangs inside the refrigerator door and provides organization for condiments, eggs, and other small items that need quick access. The door basket measures approximately 27" x 5" x 5".

Causes of a bad door basket can include broken or damaged wires from overloading or repeated impact within the refrigerator door. The organizing bins or supports inside may also become misshapen over time.

Symptoms of a bad door basket include:

• Items inside are no longer being contained and falling out
• Difficulty seeing contents due to partial collapse of the basket structure

This LG replacement is also compatible with Kenmore models that use LG components. 

This handle assembly replaces a broken, loose or worn refrigerator door handle so you can open and close the door safely and restore the appliance's appearance. It fits the factory mounting points for a secure replacement. What it does:

• Replaces damaged or cracked door handle hardware to restore grip and door operation
• Provides a stable mounting point so the door opens and closes without wobble
• Returns the finished look of the appliance when the original handle is scratched or chipped
• Helps prevent injury or food loss caused by a failing or loose handle

• Disconnect power to the appliance or unplug before working on doors to avoid injury
• Most installs require removing the door trim or access panel and fasteners; keep track of screws
• Use a soft cloth to protect the finish during installation and align the handle before tightening

This hinge cover is a replacement trim piece that hides and protects the appliance door hinge for a finished appearance and safer edges. It restores the original look and helps prevent dirt buildup around the hinge. What it does:

• Covers and protects the door hinge assembly from dust and debris.
• Restores the appliance's finished appearance by replacing cracked or missing trim.
• Helps keep clothing and hands from catching on exposed hinge parts.
• Can reduce noise from loose trim that rubs against the cabinet or door.

• Hinge cover

• Disconnect power (and water if applicable) before servicing the appliance.
• Remove the outer panel or access trim to reach the hinge area.
• Align cover over the hinge and secure using the existing clips or fasteners; do not force or pry plastic parts.
• If screws are used, tighten snugly but avoid over-torquing to prevent cracking.

A replacement hinge cap that covers and protects the upper door hinge, restoring a finished look and helping keep the hinge area free of debris. Durable plastic restores appearance and prevents direct wear on the hinge. What it does:

• Covers the exposed upper door hinge to protect it from dirt, dust and moisture.
• Helps prevent cosmetic damage to the door edge by shielding the hinge.
• Replaces cracked, broken or missing caps that leave the hinge exposed.
• Can reduce rubbing or noise caused by a damaged or misaligned cap.

• Typically snaps into place; basic hand tools may be helpful to remove the old cap.
• Support the door or follow manufacturer guidance if hinge removal or adjustment is needed.
• Inspect surrounding hinge components for wear when replacing the cap.

Upper hinge assembly that restores proper door pivot and alignment for smooth opening and closing. Replacing a worn or damaged upper hinge helps reduce sag, noise, and uneven sealing so the door closes correctly. What it does:

• Supports and pivots the refrigerator door for stable, controlled movement.
• Keeps the door aligned so the gasket seals evenly and the interior stays cold.
• Use when the door sags, binds, grinds, squeaks, or does not latch evenly.
• Replace bent, worn, or damaged hinge components that cause misalignment.

• Disconnect power and remove items from the door before starting; follow all safety precautions.
• Door removal and reinstallation often require a second person to support the door.
• Hinge orientation and hardware before tightening; follow the manufacturer service instructions for final alignment.
• Reuse or replace mounting screws and bushings as needed; do not overtighten fasteners.

Restore smooth, proper door movement with this Center Hinge Assembly. It supports the refrigerator door at the middle pivot point, helping maintain alignment and ensuring the door opens and closes correctly to seal out warm air.

• Supports the door at the center pivot for stable operation
• Helps correct issues like a sagging, misaligned, or rubbing door
• Can reduce squeaks or binding when opening/closing
• Helps the door seal contact the cabinet evenly for proper cooling

• Disconnect power and clear items from the door before service
• Support the door to prevent drops; remove hinge cover and mounting screws
• Transfer any shims/spacers in the original order for proper alignment
• After reassembly, verify door alignment and gasket seal

The Lower Hinge Assembly is an OEM part for LG refrigerators. This lower hinge safely and smoothly supports the weight of the refrigerator door.

Causes of a bad lower hinge can include loose or worn parts from years of use, damage from overloading doors with heavy items, or failure due to impact or bending stresses.  

Symptoms of a bad lower hinge include:

• Doors sagging or dropping over time
• Noisy squeaks or grinding sounds coming from hinges
• Difficulty opening and closing doors smoothly  
• Doors unable to stay open at various angles

Replace yours today with this genuine OEM LG assembly before further issues develop. This replacement part is compatible with Frigidaire, Samsung, and Kenmore models for a factory fit and function.

The Hinge Bushing is an OEM part for LG refrigerators. It serves as a crucial component in the door hinge mechanism, ensuring smooth and stable operation when opening and closing the refrigerator door.

You should replace this hinge bushing if it becomes worn out or damaged. Common causes of a bad hinge bushing include constant use leading to wear and tear, misalignment of the door, or physical damage due to impact.

Symptoms of a bad hinge bushing include:

• Difficulty in opening or closing the door
• The door sagging or not aligning properly
• Unusual noises like squeaking or grinding when the door is moved

This OEM LG part is also compatible with Sears/Kenmore.

A small retaining pin used to secure moving parts and keep components aligned for smooth operation. Replacing a worn or broken common pin can stop rattling and restore proper fit between linked parts. What it does:

• Holds or aligns two parts together so they move correctly and stay in position
• Helps prevent rattling, looseness, or parts slipping out of place
• Works as a simple mechanical fastener—no electronics involved

• One common pin

• Disconnect power to the appliance before beginning any service
• Keep track of small parts; lay out components in order to aid reassembly
• May require removal of trim or a hinge/retainer to access the pin—use basic hand tools
• If the pin is difficult to seat, do not force; inspect mating parts for damage

This cabinet roller supports the refrigerator and lets the unit roll in and out of place for cleaning or service. Replace a worn or broken roller to restore smooth movement and help keep the appliance properly positioned.

• Supports the base of the refrigerator and enables rolling movement
• Helps with safe positioning and service access without dragging
• Common failure signs: appliance is hard to move, scraping or rolling noises, a flat-spotted/cracked wheel, or a wheel that won't turn
• Replace when the roller is damaged, seized, or missing

• Disconnect power and shut off water supply; protect flooring before moving the appliance
• With help, pull the refrigerator forward and safely support it to access the roller
• Remove mounting fasteners, install the new roller, and reuse original hardware
• Confirm level and smooth movement before returning the unit to its location

This overload protector is a motor thermal cut-off that helps prevent motor overheating by interrupting power when temperatures get too high. It restores normal operation after the motor cools, helping protect the motor from heat damage. What it does:

• Senses excess motor temperature and interrupts power to prevent overheating
• Commonly used when a washer or motor hums, won't spin, or stops mid-cycle
• Protects the motor and associated components from heat-related failure
• Resets or is replaced after a thermal fault clears, depending on design

• Disconnect power before accessing the motor or electrical components
• Handle and mount the protector per OEM orientation to ensure proper thermal contact
• Inspect motor and wiring for underlying faults before replacing

This small stopper installs in the refrigerator to limit the travel of a moving component and keep it securely in place. Replacing a broken or missing stopper prevents over-extension and helps maintain smooth, aligned operation.

• Limits the range of motion for a door, bin, or drawer to prevent over-opening or accidental removal
• Helps keep interior components aligned and operating smoothly
• Replace if cracked, missing, or deformed
• Common symptoms: drawer or bin slides out too far, door swings past normal range, or a broken plastic stop is found

• Disconnect power before servicing; remove or support the affected bin/drawer/door
• Note the old stopper's orientation and location before removal
• Transfer and reuse any original screws or clips if applicable
• Snap or fasten the new stopper in place and test for smooth movement

The Drier Assembly is an OEM part for LG refrigerators. This part is responsible for removing moisture and contaminants from the refrigerant. This ensures that the refrigerant circulates effectively and efficiently, preventing damage to other components and maintaining the refrigerator's cooling performance.

Causes of a bad Drier Assembly can include contamination from moisture entering the refrigerant lines, blockages from debris or particulates, and general wear and tear over time that reduces its effectiveness.

Symptoms of a bad Drier Assembly include:

• Reduced cooling efficiency or warm refrigerator temperatures
• Unusual noises from the refrigeration system
• The compressor running continuously or cycling frequently
• Frost buildup on the evaporator coils due to improper refrigerant flow

This OEM LG part is also compatible with Sears/Kenmore models.

This holder secures the dryer-related assembly in place to reduce movement and wear, helping maintain proper alignment and quieter operation. It's a simple replacement that restores part stability in the appliance. What it does:

• Secures a dryer assembly or component to the appliance frame to prevent shifting
• Helps reduce vibration and rubbing noises caused by a loose part
• Maintains correct alignment so related parts operate smoothly
• Used when the existing holder is cracked, broken, or missing

• Disconnect power before replacing any dryer components to avoid shock or injury
• Access location and removal steps vary by model; follow the appliance's service manual or exploded view
• Keep fasteners and adjacent parts organized for reassembly; replace any damaged clips or screws

This replacement fan blade mounts on the fan motor to move air for proper cooling. A cracked, loose, or damaged blade can cause noise and weak airflow—replacing it restores smooth, reliable air circulation. What it does:

• Drives airflow to help maintain stable temperatures throughout the appliance
• Supports efficient cooling by circulating air across key areas
• Common symptoms include rattling or scraping near the fan, vibration, or wobbling
• Replacement is recommended if the motor runs but the blade slips, doesn't spin, or is visibly damaged

• 1 fan blade

• Disconnect power before servicing
• Access the fan area by removing covers/shelves as needed
• Note blade orientation; pull the old blade straight off the shaft and press the new blade on until fully seated
• Spin the blade by hand to confirm clearances, reassemble, and restore power

This controller assembly is the display/control circuit board used in compatible units. Replacing a failed board restores proper front-panel operation so you can select settings, view status, and run the appliance reliably again.

• Governs user input and display functions for the appliance's front panel
• Resolves issues like unresponsive buttons, blank or erratic display, or incorrect function selection
• Helps restore normal operation when the original board is shorted or damaged
• Designed to fit per manufacturer specifications for the intended models

• Disconnect power before servicing; electronic components can store charge
• Handle the board by edges; avoid static discharge—use ESD protection if available
• Photograph wire and connector positions before removal to ensure proper reconnection
• Do not overtighten mounting screws; verify all harnesses are fully seated

The Dispenser Micro Switch is an OEM part for LG refrigerators. It is a component of the ice and water dispensing system, responsible for activating the dispenser when the lever is pressed. 

Causes of a bad Dispenser Micro Switch can include mechanical wear from frequent use, failure due to moisture or debris affecting the switch’s contacts, or electrical faults that prevent proper signaling.

Symptoms of a bad Dispenser Micro Switch include:

• The dispenser not releasing ice or water when the lever is pressed.
• Continuous dispensing or dripping after the lever is released.
• Intermittent or no response from the dispenser controls.

This OEM LG part is also compatible with Sears/Kenmore.

The LG Refrigerator Condenser Fan Motor is an OEM part for LG refrigerators. It aids in heat dissipation by circulating air through the condenser coil to cool the refrigerant. 

Symptoms of a bad condenser fan motor include:

• The refrigerator failing to properly cool or maintaining inconsistent temperatures  
• Abnormally loud humming or buzzing noises emanating from the rear
• Reduced condenser fan blade speed or intermittent on/off cycles
• Refrigerant line temperatures being warmer than normal

Causes of a bad condenser fan motor can include failure of internal motor components, accumulated dirt/debris hindering fan blade movement, or damage due to impact.

This OEM LG part is also compatible with select Sears/Kenmore models. 

This motor support damper sits between the refrigerator's compressor and base to absorb vibration and movement. Replacing a worn damper helps quiet rattles and humming from the back of the cabinet and keeps the compressor properly supported.

• Cushions the compressor to reduce transmitted vibration and noise
• Helps quiet humming, buzzing, or rattling from the lower rear of the refrigerator
• Maintains proper compressor alignment and support on the base pan
• Common signs of wear: increased vibration/noise, a cracked or flattened damper, or noticeable compressor movement when running

• Unplug the refrigerator and pull it forward to access the rear; allow the compressor to cool before working
• Support the compressor to remove load from the mount before loosening hardware
• Replace the damper and tighten mounting hardware evenly without over-compressing the rubber
• Avoid bending or stressing refrigerant tubing; wear gloves and eye protection

The Rear Evaporator Motor Grommet is an OEM part for LG refrigerators. It's designed to secure and cushion the evaporator motor, ensuring it remains in place and operates quietly. This grommet plays a crucial role in minimizing vibrations and noise from the motor, which can otherwise lead to a disruptive refrigerator operation.

Causes of a bad Rear Evaporator Motor Grommet can result from deterioration due to cooling and thawing cycles in the refrigerator. Physical damage during cleaning or servicing may cause a loose motor fit.  

Symptoms of a malfunctioning Rear Evaporator Motor Grommet include:

• Unusual noises or vibrations from the back of the refrigerator.
• The evaporator motor shifting out of place, which can affect cooling efficiency.
• Increased wear on the evaporator motor due to lack of proper cushioning and support.

This OEM LG part is also compatible with some Kenmore models.

The Front Evaporator Motor Grommet is an OEM part for LG refrigerators. This grommet cushions and secures the evaporator motor, reducing vibrations and noise during operation to ensure efficient cooling.

Causes of a bad grommet can include prolonged use leading to material fatigue, exposure to extreme temperatures, or physical damage from accidental impacts. A damaged grommet can result in increased noise and potential misalignment of the evaporator motor.

Symptoms of a bad evaporator motor grommet include:

• Increased noise from the refrigerator
• Vibrations or rattling sounds
• Poor cooling performance
• The evaporator motor becoming loose

This OEM LG part is also compatible with Sears/Kenmore.

This harness assembly routes power and signals between appliance components to restore electrical connections and normal operation. It replaces damaged or frayed wiring to stop intermittent power, control failures, or no-start conditions. What it does:

• Reconnects power and control circuits between major components
• Replaces damaged, burned, or frayed wires and connectors that cause intermittent or lost function
• Restores reliable signal paths to controls, sensors, and motors
• Helps resolve symptoms like sporadic operation, failure to start, or component non-response

• Disconnect power to the appliance before accessing electrical components.
• Match connectors and wire routing to the original harness during installation to avoid pin miswiring.
• Inspect connector pins and mating terminals for damage; replace the harness if pins are bent or corroded.

The Power Cord Assembly is an OEM replacement part for LG refrigerators. It includes the electrical cord and strain relief that links the refrigerator to an external power source.  

This power cord assembly safely delivers electricity from the wall outlet to the internal compressor and fan modules. It facilitates proper cooling functions through this transmission of alternating current.

Symptoms of a bad power cord can include:

• Abnormal sounds such as humming or buzzing from within 
• Tripped circuit breakers interfering with operations
• Indicators of cord damage like frays or exposed wiring
• Inconsistencies in interior temperature maintenance

Causes may involve normal wear over extended use, physical stress, or accidental damage to the cord insulation.  

Replacing the power cord assembly with this genuine LG OEM part restores a reliable electrical pathway. It ensures a continued power supply to keep foods fresh and frozen.

The Heater Sheath is an OEM part for Frigidaire refrigerators. It contains a heating coil that provides regulated temperatures within the fridge. The sheath helps direct airflow while protecting internal insulation. 

Causes of a faulty heater sheath can include normal wear from years of cooling cycles. Mineral deposits accumulating on the coil could disrupt temperature regulation. Physical damage puts it at risk for air and moisture leakage issues.

Symptoms of a failed heater sheath are:

• Fluctuating interior temperatures and issues maintaining the temperature setting
• Frost or ice buildup within the fridge compartments  
• Increased energy usage without adequate chilling performance

This OEM replacement part is compatible with brands including Electrolux, Gibson, Kelvinator, and Kenmore. 

The MOTOR, DC is an OEM part for LG refrigerators. It is a direct current electric motor responsible for operating components related to cooling and airflow, such as the condenser fan and cooling fan. Efficient airflow circulation is critical for pulling heat away from refrigerated compartments and maintaining even temperatures throughout the fridge.

Causes of a bad motor can include excess dust buildup over time inhibiting proper fan rotation, worn motor brushes, or damaged motor windings affecting current flow. 

Symptoms of a bad direct current motor include:

• Abnormally warm refrigerator temperatures 
• Louder than usual operating sounds
• Lack of air coming from ventilation areas  
• Visible buildup of frost or condensation inside the fridge

Replace yours today with this genuine OEM LG part to restore optimal cooling performance. This OEM LG part is also compatible with Sears/Kenmore.

This Display Power Control Board Assembly powers and manages the appliance's front display and touch controls so the user interface lights, responds, and shows status. Replaces a failed display PCB to restore normal display operation. What it does:

• Supplies power and control signals to the front display and touch/keypad
• Helps the control panel light up and show status, cycles, or error indicators
• Restores responsiveness when display is dim, blank, or unresponsive
• Works with the main control system to convey user inputs and on-screen messages

• One Display Power Control Board Assembly as shown

• Disconnect the appliance from power before accessing the control panel to avoid shock or damage
• Handle the PCB by its edges and avoid static discharge; use an anti-static wrist strap if possible
• Verify connector alignment and seating; do not force connectors or bend pins

The Main PCB Assembly is an OEM component specifically designed for LG refrigerators. Housed inside the control housing, this circuit board directs all critical refrigerator operations from cooling and icemaking to door alarms. Precise programming maintains consistent temperatures across compartments.  

Causes of a bad main PCB can include physical impact, water damage into circuit paths, or expected component degradation over time. Without proper control, the refrigerator sections cannot regulate temperatures as designed.

Symptoms of a bad main PCB include:

• Inability to adjust temperature settings    
• Erratic cooling or icemaker performance
• Intermittent control functions and error codes
• Improper defrost functions 

This LG OEM replacement ensures reliable operation for years to come. Compatible also with Sears/Kenmore refrigerators, it provides a direct fit and restoration of cooling and temperature functions. 

This guide tube is a small routing sleeve that supports and protects a rod, shaft, cable, or line inside your appliance. It keeps the path straight to reduce friction, noise, and premature wear.

• Guides and supports a rod/shaft/cable/tube through the chassis
• Maintains alignment for smooth movement or flow
• Helps prevent chafing, kinks, and vibration-related damage
• Typical failure signs: scraping or rattling noises, binding/misalignment, or visible cracks/deformation

• Disconnect power; turn off water or gas before servicing
• Refer to your model's parts diagram for routing and mounting points
• Reuse original screws/clips unless damaged
• Route exactly like the original; avoid pinches/kinks and verify clearances before restoring power

This refrigerator ice maker assembly restores automatic ice production. It manages the fill, freeze, and harvest cycles so your freezer reliably makes and releases ice cubes into the bin.

• Produces and harvests ice cubes automatically
• Controls water fill and the freeze/eject timing for each cycle
• Pauses production when the bin is full
• Common fixes: no ice production, very low ice output, unit stuck mid-cycle, cubes not ejecting, or loud clicking from the ice maker module

• Unplug the refrigerator and turn off the water supply before servicing
• Match and seat the wire connector fully; do not force pins
• Reuse any original mounting brackets, covers, or ice-level arm if required by your model
• Align the fill tube with the ice maker fill cup; restore power and allow up to 24 hours for normal ice production

This holder assembly is a structural mounting piece that supports and secures an internal component in your appliance. Replacing a cracked or worn bracket helps restore proper alignment and keeps parts stable during everyday use.

• Provides a rigid mounting point for the attached component
• Keeps parts aligned to reduce movement and vibration
• Helps prevent rattling or noise from loose mounts
• Common signs of failure: visible cracks/broken tabs, looseness, or parts that won't stay seated

• Disconnect power and, if applicable, turn off the water supply before service
• Note the orientation of the original part to match fitment
• Reuse existing mounting screws or hardware unless the manufacturer specifies otherwise
• Do not overtighten fasteners; the secured component is fully seated and stable

The water filter head holds the water filter and connects the water lines to the water filter. Approximate dimensions: 4.4" x 4.05" x 2.5"

An in-line union for appliance tubing, this tube connector joins two sections of plastic line to create a secure, leak-resistant connection in the water circuit, ideal for restoring flow after a repair, trim, or reroute. What it does:

• Connects two lengths of compatible plastic tubing to form a continuous run
• Helps maintain proper water delivery through the appliance's water system
• Can address leaks, drips, or loose/failed connections at a splice point
• Useful when replacing, shortening, or rerouting tubing during service

• 1 tube connector

• Disconnect power and shut off the water supply before servicing
• Cut tubing square; ensure ends are clean, round, and free of gouges
• Insert tubing fully into the connector until seated, then perform a gentle pull test
• Restore water and inspect all joints for leaks; use the connector size that matches your tubing's outer diameter

This replacement injection tube routes water through the refrigerator's supply system to the ice maker or dispenser, as designed for your model. Replacing a cracked or kinked tube restores proper flow and helps prevent leaks.

• Channels water from the inlet circuit to its destination component (ice maker or dispenser, per design)
• Helps maintain a sealed path for clean, reliable water delivery
• Common symptoms: water leaking inside/behind the refrigerator
• Dispenser has slow/no flow
• Ice maker not filling or producing small/hollow ice; visible cracks, kinks, or brittle tubing

• Unplug the refrigerator and shut off the household water supply before servicing
• Note the original routing and connector types; transfer any reusable fittings or clamps from the old tube
• Insert the tube fully into existing connectors or onto barbed fittings and secure with the original clips/clamps
• Restore water, check all joints for leaks, then power on and test the dispenser/ice fill

This water inlet valve controls water flow into the appliance, restoring water delivery for the dispenser and ice system when the valve is faulty. Replaces a worn or leaking valve to help recover normal water operation. What it does:

• Opens and closes to allow water into the appliance when the dispenser or ice maker calls for water
• Stops water flow when the dispenser/ice maker is idle to prevent leaks
• Commonly linked to no water at the dispenser, no ice production, or intermittent water flow
• May leak or fail electrically if solenoids or seals wear out

• One complete water inlet valve assembly

• Disconnect power and shut off the water supply before starting any repair
• Handle water lines carefully; replace any damaged supply tubing or gaskets to prevent leaks
• Tighten fittings securely and check for leaks after restoring water and power

This water inlet valve assembly controls the flow of water from your home's supply into the refrigerator for the dispenser and ice maker. Replacing a failed valve restores reliable filling and helps prevent leaks, no-dispense, and no-ice issues.

• Regulates and routes water to the ice maker and dispenser when energized by the control system
• Resolves: no water from dispenser, no ice production, slow fill, or intermittent dispensing
• Leaks or drips from the rear valve area or water line connections
• Continuous water flow or ice maker overfill caused by a valve stuck open

• Disconnect power and shut off the water supply before servicing
• Pull the refrigerator forward to access the rear; have a towel or pan ready for residual water
• Transfer each wire connector and water tube to the matching port on the new valve; ensure all fittings lock fully
• Restore water and power, then check connections for leaks and test dispenser/ice fill

This water inlet valve controls the flow of household water into the refrigerator for the ice maker and/or dispenser. Replacing a worn valve restores proper fill, helps stop leaks, and brings back reliable ice and water performance.

• Opens when energized to deliver water to the ice maker and/or dispenser; closes to stop flow
• Common symptoms include no ice production, no or weak dispenser flow, dripping at the dispenser, overfilling ice maker, or leaks at the rear
• Helps maintain consistent water delivery and shutoff

• Disconnect power and shut off the water supply before servicing
• Pull the refrigerator forward, relieve line pressure, and place a towel to catch residual water
• Label and transfer tubing and wire connectors to the matching ports; secure the valve in the original mounting location
• Restore water and power; check all fittings for leaks and flush the dispenser to clear air and debris

This inject tube routes water from the supply to the appliance's ice/water system, helping deliver a sealed path for water flow. Replacing a damaged tube restores proper water delivery and prevents leaks at the inlet. What it does

• Directs water from the supply line to the ice maker or dispenser.
• Maintains a sealed pathway to prevent dripping or pooling inside the cabinet.
• Worn, cracked, or kinked tubes can cause reduced water flow, leaking, or intermittent filling.
• Used when visible damage or persistent water delivery issues point to the tubing itself.

• One inject tube as shown.

• Always disconnect power and shut off the water supply before beginning service.
• Inspect and replace any worn clamps, fittings, or seals during reassembly as needed.
• Route the tube to avoid sharp bends and pinch points; secure with existing clips or clamps.

Note: 90 degree elbow coupler (Fits 1/4" diameter tubing on each end) For 5/16" elbow connector, order part# 4932JA3009B.

The Water Line Union is an OEM part for LG refrigerators. This component connects sections of the water line, ensuring a secure and leak-free passage of water to the refrigerator's icemaker and water dispenser. It is an elbow tube union connector, which connects two tubes at a 90-degree angle.

Causes of a bad water line union can include wear and tear from frequent use, damage from high water pressure, or deterioration due to mineral buildup and age. A compromised union can lead to water leaks and disruption in the water supply.

Symptoms of a bad Water Line Union include:

• Water leaks around the connection points
• Reduced water flow to the icemaker or water dispenser
• Puddles or moisture near the refrigerator
• Unusual noises from the water line

This OEM LG part is also compatible with Sears/Kenmore.