Parts for Ge ZGP366NR1SS: 05 - Oven Cavity Parts

The Igniter Mounting Screw is an OEM replacement part for GE ovens and ranges. This screw secures the igniter to the burner assembly, ensuring it remains firmly in place for consistent and reliable ignition. Its precise fit and durable design help maintain the stability and functionality of the igniter.

Over time, mounting screws can become corroded, stripped, or lost during repairs or maintenance. A missing or damaged screw may result in a loose igniter, affecting the appliance's ability to ignite properly.

Symptoms of a bad or missing igniter mounting screw include:

• The igniter becoming loose or misaligned

• Difficulty securing the igniter during installation or repair
• The burner fails to ignite reliably or consistently
• Increased noise or movement of the igniter during operation

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

This igniter cover is a replacement protective shield that helps protect the oven igniter from food spills and debris, extending the igniter's service life and helping the burner ignite reliably. What it does:

• Shields the oven igniter from direct contact with spills, drips and falling debris
• Helps prevent premature igniter damage that can lead to ignition problems
• Can reduce the chance of shorting or erratic ignition caused by contamination
• Matches original shape to ensure proper fit and clearance around the igniter

• Disconnect power to the appliance (and shut off gas if applicable) before servicing
• Allow the oven to cool completely and wear gloves to avoid cuts from sheet metal
• Handle the igniter and cover carefully; avoid touching the igniter surface directly
• Test appliance operation after reinstall

This oven igniter lights the gas for the oven burner so your range can preheat and maintain temperature. Replacing a weak or failed igniter restores reliable ignition and consistent oven heating performance.

• Heats to draw open the gas safety valve and ignite the oven burner
• Helps fix: oven not heating or failing to reach temperature
• Igniter glows but burner won't light, or takes a long time to light
• Intermittent oven heat or frequent preheat failures

• Disconnect power and shut off gas before servicing
• Handle the ceramic igniter carefully; avoid touching or stressing the heating element
• Transfer any required mounting hardware from the original and route wires away from hot surfaces
• After installation, restore power and gas and verify the burner lights and the flame is steady

A complete oven rack and guide kit that restores proper rack support and smooth sliding in compatible 48" and 36" ovens. Replaces worn, bent or broken racks and roller/guide assemblies to improve rack stability and function. What it does:

• Provides a full replacement rack plus guide hardware to support cookware and prevent sagging
• Restores smooth, even rack movement when sliding food in and out of the oven
• Replaces bent, warped or damaged rack or guide components that cause sticking or uneven travel
• Helps maintain correct oven clearance and safe placement of cookware while cooking

• Always disconnect power to the oven and allow it to cool before installing parts
• Installation uses basic hand tools; keep fasteners and hardware in a safe place during replacement
• Inspect oven cavity and mounting points for damage and replace any additional worn hardware as needed
• Follow the appliance manufacturer's instructions for correct placement and testing after installation

This replacement burner griddle provides a flat stovetop cooking surface that restores even pan-to-burner contact for griddling and frying. It replaces worn, warped, or missing griddle surfaces so you can cook foods like pancakes and sandwiches properly. What it does:

• Covers two adjacent burners to create a larger, flat cooking surface
• Distributes heat from the range burners for griddling and searing
• Helps restore even cooking when the original griddle is warped or damaged
• Works with compatible gas/electric cooktop configurations that accept a removable griddle

• One burner griddle

• Ensure the range is turned OFF and fully cool before handling or installing
• Set the griddle into place over the designated burners, aligning edges so it sits flat and stable
• No wiring or tools typically required; follow the appliance owner's manual for safe placement and usage
• Do not use if warped, cracked, or if it interferes with burner flames or controls

The Igniter Glowbar is an OEM part for GE ovens. This component is essential for igniting the gas in the oven burner, producing the heat required for cooking and baking. The glowbar heats up to a high temperature, igniting the gas and ensuring efficient and reliable oven operation.

Causes of a bad igniter glowbar can include wear and tear from regular use, electrical faults, or damage from high temperatures over time. A worn or damaged igniter may fail to reach the necessary temperature to ignite the gas.

Symptoms of a bad igniter glowbar include:

• The oven not heating up
• Delayed ignition or the oven taking longer to preheat
• A weak or no glow from the igniter
• The smell of gas without ignition

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

Probe thermistor (temperature sensor) gives the refrigerator control board accurate internal temperature readings so it can regulate compressor and defrost cycles. Replacing a bad thermistor helps restore steady cooling and correct temperatures. What it does:

• Senses interior temperature and sends the signal to the control board so cooling and defrost cycles operate correctly.
• Fails can cause uneven temperatures, items being too warm or too cold, or intermittent cooling.
• Often used in fresh food and freezer compartments as part of temperature control and defrost systems.
• Electrical symptoms may include inconsistent cycling or the fridge running more than expected.

• Disconnect power before servicing to avoid electrical shock.
• Handle the sensor tip and wiring gently; avoid kinking or crushing the probe or leads.
• Basic hand tools are usually required; check the appliance service manual for access and routing.
• After installation, restore power and confirm correct operation.