Parts for Ge PVM9005FM8DS: Oven Cavity Parts

This cooktop lamp socket is the replacement holder that secures the cooktop bulb and provides the electrical connection so interior or surface lights work reliably. Restores proper bulb seating and electrical contact for safe lighting. What it does:

• Holds the cooktop light bulb in place and provides the electrical connection to power the lamp
• Re-establishes a secure contact if the original socket is loose, burned, or cracked
• Helps resolve symptoms like a bulb that flickers, won't stay lit, or fails to power on
• Compatible with standard cooktop light bulbs used in many GE cooktops

• One cooktop lamp socket

• Disconnect power to the appliance before servicing to avoid electric shock
• Inspect wiring and terminals for damage; replace any frayed or heat-damaged wires
• Securely seat the bulb and test operation before reassembling the cooktop

This replacement plate restores the original support and fit for the appliance component it secures, helping stop rattles and misalignment. Use this OEM-design plate when the original is bent, cracked, or missing. What it does:

• Provides a stable mounting surface to secure adjacent parts and assemblies
• Prevents movement that can cause noise, misalignment, or uneven operation
• Restores correct spacing and alignment for panels or elements
• Helps maintain safe, consistent appliance performance when damaged

• One plate

• Disconnect power (unplug or switch off breaker) before starting any repair
• Handle edges carefully; replacement metal parts can have sharp edges
• Verify orientation and alignment before tightening fasteners; use only the hardware specified by the manufacturer

This factory glass panel replaces a cracked, shattered, or missing original, restoring a clean, safe cover/viewing surface on your appliance. It helps protect internal areas from splatter and keeps the assembly looking and fitting the way it should.

• Replaces a damaged glass component within the original assembly on applicable models
• Restores a clear, smooth surface for proper appearance and function
• Helps shield underlying parts from spills, grease, and debris
• Common symptoms: cracked or shattered glass, missing piece, sharp edges, looseness/rattling

• Disconnect power before servicing; allow all surfaces to cool
• Wear cut-resistant gloves and eye protection; handle edges carefully
• Support the panel/door during removal and installation to prevent stress on frames/hinges

This vent grille covers the upper front opening of the microwave and channels exhaust air through the louvered slots. Replace a cracked, loose, or missing grille to maintain proper ventilation and restore the unit's finished appearance.

• Directs exhaust airflow while allowing adequate ventilation
• Shields internal components at the upper front of the microwave
• Provides a clean, finished look when secured in place
• Typical symptoms: broken or missing louvers, loose fit, rattling noise, grille won't stay secured

• Disconnect power to the microwave before servicing
• Remove and retain mounting screws; support the grille as the last fastener is removed
• Transfer any reusable clips or nameplate from the old grille if present
• Align the new grille and start screws by hand; tighten gently to avoid cracking

The Microwave Grease Filter is an OEM part for GE microwaves. As an essential safety component, it traps smoke, grease, and residue from foods prepared using the microwave's convection cooking functions. Proper filtration prevents dangerous buildup on interior surfaces.

Symptoms of a bad microwave grease filter include:

• Excess grease or burnt residue inside the microwave cavity
• Unpleasant odors emitted from the ventilation system
• Reduced or no ability to filter combustion byproducts

Causes can be damage from cleaning chemicals or excessive heat warping the filter material over time. Regular cleaning helps filters maintain effectiveness.

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

The Halogen Lamp is an OEM replacement part for GE microwaves. It provides optimal interior light for monitoring food as it cooks. Consistent illumination supports convenience and usability. 

Causes generally involve standard wear of the lamp coil and filament from heat and electromagnetic forces during operation. Accidental damage is another potential issue.

Symptoms of a bad halogen lamp include:

• Dark or splotchy lighting inside the microwave  
• Inability to fully view food as it cooks
• Difficulty determining if items are thoroughly heated
• Shadows create the potential for uneven cooking 

This GE OEM replacement is compatible with some Hotpoint, RCA, and Kenmore models. 

This nut assembly secures an appliance component to its mounting point, restoring a solid connection and preventing unwanted movement. Replace a damaged or missing nut to stop rattling and keep parts aligned for reliable operation. What it does:

• Fastens a panel, bracket or component to its mounting stud or bolt to maintain proper alignment.
• Restores a secure connection when the original nut is stripped, corroded or missing.
• Helps stop rattling, looseness or parts that won't stay in place.
• Works as a direct replacement to restore proper fit and function.

• Disconnect power (and water if applicable) before beginning any repair.
• Use the correct-size socket or wrench; avoid cross-threading when installing.
• Tighten snugly but do not overtighten — replace mating hardware if threads are damaged.

This safety cover protects internal wiring and components by enclosing delicate parts and helping prevent accidental contact. It restores a safe barrier and helps avoid shorting or debris buildup in the affected area. What it does

• Covers and protects wiring, connectors and nearby components from contact and debris
• Helps prevent accidental electrical contact and reduces risk of shorts where the cover is installed
• Commonly replaced when the original cover is cracked, melted, broken or missing
• Helps restore proper component spacing and secure mounting of nearby parts

• One safety cover

• Disconnect power to the appliance before servicing; verify it cannot be energized
• Remove panels or trim as needed to access the cover; keep fasteners for reinstallation
• Align mounting tabs or screw holes and secure with the original hardware
• If wiring or components show damage, replace or repair those items before reinstalling the cover