Parts for Lg LMV2015ST: Oven Cavity Parts

This factory fastener secures appliance panels and components. Use it to replace a missing, stripped, or corroded screw so brackets, covers, and assemblies stay tight and properly aligned, helping reduce vibration and rattling.

• Secures panels, brackets, and internal components in their proper positions
• Replaces missing, worn, or cross-threaded hardware
• Helps eliminate vibration and rattling from loose parts
• Supports proper alignment of covers and assemblies

• Disconnect power to the appliance before servicing; allow any moving parts to stop
• Match this screw to the location shown in your model's parts diagram
• Start threads by hand to avoid cross-threading, then tighten snugly with the correct driver
• Do not overtighten to prevent stripping threads or cracking plastic bosses

A sheet-metal tapping screw used to fasten appliance panels and components where a self-threading fastener is needed. Replaces stripped or missing screws to restore secure fits and reduce rattling or loose trim. What it does

• Threads into thin metal or plastic mounting points to secure panels, brackets, and trim
• Commonly used where pre-formed threads are not available
• Helps stop vibrating or loose panels that cause noise or alignment issues
• Designed to grab and form threads as it's driven in for a tight hold

• Tapping screw

• Use the correct screwdriver bit to avoid cam-out or head damage
• Start straight and drive slowly until snug; avoid over-tightening which can strip or crack mounting material
• Disconnect power and remove nearby wiring or components as needed for safe access
• Wear eye protection when working with small fasteners and metal panels

The Grille, Vent is an OEM part for LG microwaves. The grille measures approximately 23 x 3.75 inches and is designed to cover components inside your microwave. Positioned typically at the top or front of the microwave, this grille ensures that the appliance maintains an optimal temperature, preventing overheating and ensuring efficient operation.

Symptoms of a failing Vent Grille include:

• Excessive steam or heat buildup within the microwave
• The microwave overheating during use
• Noise or vibration due to loose or damaged grille components
• Visible signs of wear, such as cracks, warping, or discoloration on the grille

Causes of a bad vent grille can include physical damage from routine cleaning or use, warping due to exposure to high temperatures, or blockages from accumulated grease and debris which can restrict airflow.

This molded resin cover restores a clean, finished look while protecting the underlying assembly. Use it to replace a cracked or missing cover so components stay shielded and properly secured during normal operation. What it does:

• Shields internal components and provides a finished appearance for the covered area
• Helps keep dust, grease, and debris away from internal parts as designed
• Replaces covers with broken tabs, cracks, warping, or missing sections
• Common symptoms include a loose/rattling panel, poor fit, or visible damage

• One resin cover

• Disconnect power to the appliance before servicing
• Remove any mounting screws and/or release tabs; note the orientation for reassembly
• Transfer reusable clips or hardware from the original cover if applicable
• Do not overtighten fasteners to avoid cracking the plastic

Replacement refrigerator shelf that restores usable storage space and support for food and containers. Helps keep items organized, prevents spills, and returns a stable surface after a cracked, chipped, or missing shelf. What it does:

• Provides a flat, supportive surface for storing food, containers and small appliances
• Replaces cracked, chipped or missing shelving to restore usable interior space
• Helps reduce spills and keeps items from shifting when the door is opened or closed
• Seats into the refrigerator's existing shelf supports to re-establish stable storage

• Remove the old shelf per your owner's manual by lifting or sliding it out of the shelf supports
• Handle carefully; wear cut-resistant gloves if replacing a cracked or broken glass shelf
• Place the replacement shelf into the same supports—do not force or bend the shelf

This Nut Assembly is a threaded fastener used to securely hold an associated component inside the microwave. Replacing a worn, stripped, or missing nut helps reduce vibration, eliminates rattling, and keeps parts properly aligned during operation.

• Provides a secure threaded anchor point for the matching screw/bolt
• Helps maintain alignment and prevent vibration or rattling
• Replaces stripped, cracked, or missing hardware
• Addresses symptoms like loose or shifting components and recurring rattling noises

• Disconnect power; if built-in, switch off the circuit breaker
• Access the mounting location, remove damaged hardware, and install the new nut assembly
• Avoid overtightening to prevent damage to threads or surrounding material

The Light Bulb is an OEM part for LG microwaves. It provides illumination inside the microwave oven, allowing users to monitor the cooking process and check the condition of the food without opening the door.

Causes of a bad light bulb can include normal wear and tear, electrical surges, or damage due to impact or overheating. Over time, the filament inside the bulb can burn out, or the bulb itself can become loose or disconnected.

Symptoms of a bad light bulb include:

• The microwave interior light not turning on
• Flickering or dimming of the light
• Intermittent lighting during operation

This OEM LG part is also compatible with Sears/Kenmore models.

This replacement lamp socket holds the light bulb and provides a stable electrical connection so your appliance light works reliably. Replace a heat-damaged or loose socket to restore consistent illumination and help prevent flicker, arcing, and premature bulb failure.

• Secures the bulb and connects it to power
• Restores proper interior or work-area lighting
• Addresses flickering, intermittent light, or bulbs failing early from poor contact
• Replaces sockets that are cracked, melted, or discolored

• Disconnect power at the breaker or unplug before servicing
• Allow the area to cool; wear gloves and safety glasses
• Note wire positions and transfer one lead at a time to the new socket
• If servicing a microwave, access only the lamp area per your model instructions; do not open the cabinet—internal components can retain high voltage

This replacement lamp socket holds the light bulb and provides a stable electrical connection so your appliance light works reliably. Replace a heat-damaged or loose socket to restore consistent illumination and help prevent flicker, arcing, and premature bulb failure.

• Secures the bulb and connects it to power
• Restores proper interior or work-area lighting
• Addresses flickering, intermittent light, or bulbs failing early from poor contact
• Replaces sockets that are cracked, melted, or discolored

• Disconnect power at the breaker or unplug before servicing
• Allow the area to cool; wear gloves and safety glasses
• Note wire positions and transfer one lead at a time to the new socket
• If servicing a microwave, access only the lamp area per your model instructions; do not open the cabinet—internal components can retain high voltage