Amana Refrigerator 2599CIW Parts

Best Seller

Genuine Whirlpool part

Condenser Fan Motor Kit

By: Whirlpool

Part Number: 833697

This OEM Replacement Part is a high-quality, 2-watt condenser fan motor for Whirlpool refrigerators.The motor is designed to optimize your refrigerator's cooling performance. This 115-volt motor operates with a clockwise rotation.

Symptoms of a bad condenser fan motor kit include:

Gradual rise in interior freezer temperatures
Inability to maintain consistent cooling performance
Loud buzzing or grinding noises coming from inside
Tripped breakers or failure to restart after service

Causes stem from normal wear of ball bearings as the high-efficiency motor operates continuously. Exposure to dust or debris introduced through openings accelerates wear over many years of use.

This OEM part is also compatible with brands including Kenmore, KitchenAid, and Danby.

This part fixes the following symptoms

Fridge runs too long
Noisy
Freezer section too warm
Fridge too warm

Do-It-Yourself Stories from Customers like You Conderser motor went out David W. • Durand , MI • April 03, 2014

After reviewing the 'how to' video on AppliancePartsPros.com, I unplugged the refrigerator and removed the back cover to access the motor. I then unplugged the wiring and removed the bad motor. I cut the clip plug and wired it to the new motor, installed the fan blade from the old motor and re-installed the new motor. After connecting the clip plug and re-installing the back cover, I plugged the refrigerator in and checked the interior about 5 minutes after the repair. Everything has been... Read more

$61.95

Compare At:: $73.72
You Save:: $11.77

IN STOCK

Ships Today Guaranteed

Add to Cart

Genuine Whirlpool part

Overload & Relay Assembly

By: Whirlpool

Part Number: 61003103

Genuine Whirlpool part

Tank- Coil

By: Whirlpool

Part Number: D7787801Q

Genuine Whirlpool part

Gasket, Fresh Food Door ( White )

5.0 (2)

By: Whirlpool

Part Number: WP10359708Q

This part fixes the following symptoms

Fridge runs too long
Door sweating

Do-It-Yourself Stories from Customers like You The gaskets were worh out John M. • Kihei , HI • April 13, 2015

This is a side x side. I removed the refrigerator door first, laid it on the counter, These doors have screws all around under the gaskets. Loosed the screws, removed the old gasket. I left the new gaskets in the sun while I removed the old ones. Stated with the new gasket in one corner then the opposite corner then continued around the door. Retightened screws then put the door back on the unit. Repeated the same with the freezer door. Disconnecting power and water line before removing... Read more