Kenmore Washer 110.26002010 (11026002010, 110 26002010) Parts

This control knob lets you select settings on your appliance and restores a clean, easy-to-grip interface when the original knob is worn, cracked, or missing. Simple push-on design provides quick, tool-free replacement so controls look and feel like new.

• Rotates the control shaft to change settings
• Replaces knobs that are cracked, loose, hard to turn, or missing
• Restores accurate user control and clear pointer alignment
• Maintains original fit and appearance

• Disconnect power and shut off gas before servicing.
• Pull the old knob straight off the control shaft; avoid twisting the shaft.
• Align the new knob's pointer and D-flat (or spline) orientation with the shaft, then press firmly into place.
• Test operation through all settings before returning the unit to service.

This electronic control board replaces the washer's user interface assembly to restore control panel functionality and cycle selection. It lets the washer accept commands, display status, and control timed operations for normal washing. What it does:

• Interprets button/touch inputs and sends signals to the washer's main control systems
• Manages cycle selection, timer/countdown, and on/off responses
• Displays status/diagnostic codes and cycle progress on the control panel
• Commonly used to repair unresponsive controls, blank or flashing displays, or faults with cycle selection

• One electronic control board (user interface assembly)

• Disconnect power to the washer before starting any repairs to avoid shock
• Handle the board by edges and avoid touching components to prevent static damage
• Transfer any required buttons, overlays, and connectors from the old assembly unless a complete assembled panel is supplied

This replacement brace reinforces appliance cabinet structure to restore proper alignment and reduce vibration. It helps maintain secure mounting of adjacent panels so doors and controls operate smoothly. What it does:

• Provides structural support for the appliance cabinet and connected panels
• Reduces rattling or vibration caused by loose or bent cabinet components
• Helps realign panels that are pulling away or not closing flush
• Useful when visible damage, bending, or missing support causes fitment issues

• Disconnect power and, if applicable, gas supply before starting any repair
• Remove outer cabinet panels or access panels to reach the brace mounting points
• Retain original fasteners when possible; replace damaged screws or clips as needed

Color: White. Size: 1 qt. can. Acrylic appliance paint.

This washing machine main control board is manufactured by Whirlpool. This board is responsible for monitoring and managing all the functions of the washer, such as filling, agitating, spinning, and draining. A control board can suffer from corrosion and degradation due to exposure to heat, moisture, and other factors.Signs that the main control board may be faulty include erratic operation, failure to finish a cycle, or even complete failure of the appliance. The washer's display may also show error code F1 E1. To get the washer back in working condition the board will need to be replaced. After replacing the main control board, the washing machine will need to be recalibrated.This genuine OEM part is sold individually and is compatible with Whirlpool and Kenmore washing machines.

This wire shield is a molded protective cover that helps keep wiring routed and protected from heat, abrasion and moving parts. It prevents chafing and reduces the risk of shorts for a safer appliance operation. What it does:

• Covers and routes wiring to protect insulation from heat and friction
• Prevents wires from contacting sharp edges or moving components
• Helps stop intermittent shorts, arcing, or wiring damage that can cause odor or failures
• Maintains proper wire position to support consistent electrical connections

• One wire shield

• Disconnect power to the appliance before beginning any work
• Secure with existing clips or fasteners; do not force or modify the part
• If wiring insulation is melted or damaged, replace wiring/harness before reassembly

This dispenser is the exterior door component that delivers chilled water and/or ice from the refrigerator, restoring normal dispensing and preventing drips or jams. It replaces a damaged, cracked or non-functioning door dispenser. What it does

• Guides water and ice from the internal plumbing to the exterior spout so items can be dispensed from the door.
• Re-establishes a secure spout and actuator for reliable dispensing and reduced leaks.
• Stops common dispenser symptoms such as leaking at the door, stuck or loose dispenser lever, and misaligned spout.
• Helps restore normal dispensing when the door dispenser is cracked, broken, or no longer seating properly.

• One dispenser assembly.

• Disconnect power and shut off the refrigerator water supply before beginning.
• Remove the interior door panel and any trim to access the dispenser assembly; keep fasteners organized for reassembly.
• Inspect and replace any worn gaskets or seals to prevent leaks; ensure proper hose routing.
• Test operation and check for leaks after reconnecting power and water.

This replacement silverware/cutlery basket holds utensils securely during dishwasher cycles to keep items organized and allow thorough cleaning. Durable molded plastic resists staining and lets water and detergent reach utensils for better wash performance. What it does

• Holds forks, knives and spoons in place so utensils don't fall through the lower rack
• Allows water and detergent to circulate around cutlery for improved cleaning
• Helps prevent scoring and nesting of utensils for more even washing
• Restores organization to the dishwasher's lower rack when the original basket is cracked or missing

• One replacement silverware/cutlery basket

• No special tools required; simply set the basket into the lower dishwasher rack
• Handle carefully to avoid sharp utensils during installation
• Follow dishwasher manufacturer's safety instructions and disconnect power if recommended before servicing

The Lid is an OEM part for Whirlpool washers. As the top cover, the lid seals in the water and allows the machine to properly wash clothes. It also protects internal components from dust and debris. 

Causes of a bad lid can include cracks, breaks or warping from extended use or accidental damage. Normal wear and tear over time can cause deterioration. 

Symptoms of a bad lid include:

• Water leaks around the lid during wash cycles 
• The lid does not close or seal properly
• Excessive noise from an ill-fitting or loose lid
• Dust or dirt inside the washer from an incomplete seal

This OEM Whirlpool replacement lid is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.