Kenmore Washer Dryer Combo 110.88732795 (11088732795, 110 88732795) Parts

This mechanical 3-cycle timer controls wash cycles and timing functions on compatible top-load washers, restoring cycle advance and basic program selection. It replaces a worn or non-advancing timer to help the machine complete wash, rinse and spin stages. What it does:

• Rotates through the washer's main cycle positions to trigger agitate, drain and spin operations
• Restores proper cycle advancement when the timer motor stalls or stops
• Can correct symptoms like no cycle progress, stuck in one stage, or failure to initiate agitate/drain
• Works as the user control timing mechanism for mechanical cycle selection

• One 3-cycle mechanical timer

• Disconnect power to the appliance before starting work to avoid shock
• Access usually requires removing the control panel; handle connectors and mounting screws carefully
• Note wire locations or take a photo before unplugging connectors for correct reassembly

Includes gasket sealer.

Note: The manufacturer no longer includes the motor shield WP3946532 mentioned in the video. If needed, order it separately.

The Direct Drive Washer Motor is an OEM part for Whirlpool washing machines This motor drives the agitation, spinning, and draining processes during the laundry cycles, ensuring clothes come out clean and well spun. 

Causes of a bad Direct Drive Washer Motor can range from wear and tear over time, overheating due to overloading or obstructed movement, and electrical failures like short circuits or blown capacitors. 

Symptoms of a failing Direct Drive Washer Motor include:

• The washing machine not agitating or spinning correctly
• A noticeable decline in the washer's performance
• Unusual noises, such as humming or buzzing, indicating the motor is struggling

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper and some Kenmore models.

The Seal is an OEM part for Whirlpool washing machines. This part provides a tight seal around the washer shaft, preventing water from leaking out of the tub during the wash cycle.

Causes of a bad shaft seal can include wear and tear over time, exposure to harsh detergents or cleaning agents, or damage from foreign objects that may have gotten into the washer. 

Symptoms of a bad shaft seal include:

• Water leaking from the bottom of the washing machine
• Excessive noise during operation
• Visible damage or wear on the seal
• Wet spots or puddles under the washer

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper and some Kenmore models.

A cam sleeve that supports and guides the cam on its shaft to keep the cam-driven mechanism moving smoothly. Replacing a worn sleeve helps restore correct alignment and reduces binding or intermittent movement. What it does

• Centers and stabilizes the cam on its shaft for reliable engagement.
• Prevents metal-on-metal wear between the cam and shaft.
• Helps eliminate binding, wobble, or uneven operation caused by a worn sleeve.
• Common symptom of failure: noise, sticking, or irregular movement from the cam-driven mechanism.

• Disconnect power to the appliance before beginning any repair.
• Access typically requires removing the appropriate service panel; follow the model service manual.
• Inspect mating cam and shaft for wear; replace any damaged components.
• Reassemble panels and verify proper operation before returning the appliance to service.

A replacement thrust bearing that supports the washer transmission shaft to reduce axial wear and help the gearbox rotate more smoothly. Use this bearing to address noisy transmission operation and reduce metal-on-metal wear when the original is worn. What it does:

• Supports axial load on the transmission/gearcase shaft to reduce friction and wear
• Helps prevent grinding, scraping, or other metal-on-metal noises from the gearbox
• Can reduce rough or noisy spin and improve agitation when a worn bearing is the cause
• Helps maintain proper alignment of transmission components for smoother operation

• Disconnect power and water supply and drain the washer before beginning any work.
• Replacement requires accessing the agitator/gearcase per the OEM service manual and may involve transmission/gearcase disassembly.
• Inspect nearby seals, fasteners and other bearings while servicing; replace damaged parts to avoid premature failure.

This spring-damper assembly cushions and stabilizes moving components to reduce noise, vibration and abrupt motions. It restores smoother operation and helps prevent wear on related parts. What it does:

• Absorbs shock and controls motion to reduce banging or sudden movement
• Stabilizes moving components for quieter, smoother operation
• Helps prevent accelerated wear on hinges, levers or linkages
• Addresses symptoms like excessive vibration, rattling or irregular movement

• Disconnect power (and water if applicable) before starting any repair
• Handle carefully; springs can be under tension—wear safety glasses and gloves
• Basic hand tools typically required; follow OEM service instructions for alignment
• Inspect and replace other suspension or hinge parts as needed for best results

This inner wash tub replaces the damaged or worn basket that holds clothes during the wash cycle, restoring water containment and proper agitation for effective cleaning. Designed to match OEM fit and function for compatible washers. What it does:

• Replaces the inner wash basket that contains water and clothes during wash and rinse cycles
• Restores proper water sealing and prevents leaks caused by cracks or corrosion in the tub
• Helps resolve symptoms like visible tub damage, water leaks, or abnormal wash performance
• Works with the washer's agitator or pulsator to allow normal drum rotation and agitation

• Disconnect power and water supply before starting; follow lockout/tagout procedures
• Handle carefully to avoid damage to tub finish and sharp edges; wear gloves and eye protection
• Reassemble and test for leaks and proper operation before returning machine to service

This lid latch secures the appliance lid and, on interlock-equipped models, signals that the lid is closed so the cycle can run safely. It restores proper closure and dependable operation when the original latch is worn or broken. What it does

• Latches the lid closed to prevent unintended opening during operation
• Engages the lid switch/lock circuit where used, allowing the cycle to start or continue
• Helps maintain alignment between the lid and strike/keeper for reliable closure
• Common symptoms include: lid won't stay closed, unit won't start or advance, intermittent stopping when the lid is bumped

• 1 lid latch

• Disconnect power before servicing; turn off water supply if applicable
• Access the latch, remove retaining screws/clips, and note orientation for reassembly
• Install the new latch and align it with the lid strike/keeper; reuse original hardware if required
• Close the lid and run a short test to ensure proper engagement and operation