Kenmore Dishwasher 363.1401191 (3631401191, 363 1401191) Parts

Genuine Ge part

Deflector

By: Ge

Part Number: WD12X339

$19.95

Compare At:: $28.41
You Save:: $8.46

Out Of Stock

Usually ships within 4 - 14 days

Add to Cart

Genuine Ge part

This is a replacement mounting nut that secures components to their mating studs or shafts, restoring proper fit and preventing looseness that can cause noise or misalignment. Use it to replace a worn, stripped, or missing nut. What it does:

Fastens parts to studs or shafts to keep assemblies secure and aligned.
Prevents wobbling, rattling, and reduced performance caused by a loose or missing nut.
Restores reliable mechanical connection after thread damage or corrosion.
Works where a standard hex-style fastening nut is required by the OEM design.

What's included:

One replacement mounting nut.

Install notes:

Disconnect power and unplug the appliance before beginning work.
Verify correct stud engagement and thread direction before tightening.
Use the proper-sized wrench and tighten to the manufacturer's recommended torque; avoid over-tightening to prevent thread damage.
If threads are damaged, replace the mating stud or use an approved repair kit—do not force a nut onto stripped threads.

$6.47

Compare At:: $7.12
You Save:: $0.65

Out Of Stock

Usually ships within 4 - 14 days

Add to Cart

Genuine Ge part

Hanger Mech

By: Ge

Part Number: WD1X1455

$4.45

Compare At:: $4.90
You Save:: $0.45

Out Of Stock

Usually ships within 4 - 14 days

Add to Cart

Genuine Ge part

Pump Seal And Impeller Kit

4.9 (48)

By: Ge

Part Number: WD19X10032

This kit is used to repair a leaking pump on GE made dishwashers. For a complete pump/motor assembly get WD26X10013.

Do-It-Yourself Stories from Customers like You Leaking water onto the floor John G. • Canmer , KY • May 28, 2015

The main conduit was broken and the pump connector had a hole in it. The pump also was showing signs of leaking. I completely disassembled the dishwasher cleaned everything and reassembled. The repair videos are a big help. Thank you. Read more

Genuine Ge part

Check Valve

5.0 (3)

By: Ge

Part Number: WD1X5488

Do-It-Yourself Stories from Customers like You Our ge dishwasher model gsd580p49ba was not fully cleaning dishes after washing. we kept finding grainy food particles and debris deposited all over the dishes Mary H. • Boonsboro , MD • February 07, 2020

We removed the spray arm from the Spray Arm Hub and Support Assembly (GE part WD22X126) and discovered that the Check Valve (GE part WD1X5488), which prevents dirty water from flowing back into the tub, was missing completely. Replacement was very easy - the soft rubber valve pushes into position from the inside of the Support Assembly. We also found that the Plastic Thrust Washer (GE part WD3X766) inside the center of the Spray Arm Hub had eroded considerably, so we replaced that as well. Read more

Genuine Ge part

Screw (12-Pack)

By: Ge

Part Number: WZ2X45D

Includes 12 screws.

Genuine Ge part

Tub Insulation

5.0 (2)

By: Ge

Part Number: WD01X10262

Do-It-Yourself Stories from Customers like You I had a problem with mice behind and on top of my dishwasher had to replace the insulation blanket Lee F. • Sonoita , AZ • November 09, 2018

Pulled it out and cleaned then replaced the blanket. Read more

Genuine Ge part

Hinge Arm Bearing

By: Ge

Part Number: WD12X231

Genuine Ge part

Shield & Clip Kit

By: Ge

Part Number: WD12X338

Genuine Ge part

Bracket Cover

By: Ge

Part Number: WD12X377

Genuine Ge part

Nut

5.0 (1)

By: Ge

Part Number: WD12X378

Do-It-Yourself Stories from Customers like You Dishes were not getting clean spray arm was not fully extending up and water hardly came out of spray arm you could open door half way and watch inside Don F. • Bellevue , NE • April 05, 2015

Replaced spray arm assembly, it's a different style than what was in the dishwasher but it's an easier style to work with. I also ordered support assembly and did not need it,spray arm assembly was all I needed. Read more

Genuine Ge part

Cam, Timer

By: Ge

Part Number: WD16X308

Genuine Ge part

Connector

5.0 (1)

By: Ge

Part Number: WD18X206

This has male threads. For female threads use WD18X214

Do-It-Yourself Stories from Customers like You There were pinholes in the old connector Steven D. • Muskego , WI • November 09, 2014

My husband removed the old connector and replaced it with a new one. My dishwasher is a GE and we bought it in 1992. Since then only a few parts needed to be replaced. I am not looking forward to looking for a new dishwasher since this one has lasted so long and still cleaning dishes. Read more