Kenmore Dishwasher 363.1402192 (3631402192, 363 1402192) Parts

Genuine Ge part

Nut (Mounting), 1 Count

By: Ge

Part Number: WD1X1289

This is a replacement mounting nut that secures components to their mating studs or shafts, restoring proper fit and preventing looseness that can cause noise or misalignment. Use it to replace a worn, stripped, or missing nut. What it does:

Fastens parts to studs or shafts to keep assemblies secure and aligned.
Prevents wobbling, rattling, and reduced performance caused by a loose or missing nut.
Restores reliable mechanical connection after thread damage or corrosion.
Works where a standard hex-style fastening nut is required by the OEM design.

What's included:

One replacement mounting nut.

Install notes:

Disconnect power and unplug the appliance before beginning work.
Verify correct stud engagement and thread direction before tightening.
Use the proper-sized wrench and tighten to the manufacturer's recommended torque; avoid over-tightening to prevent thread damage.
If threads are damaged, replace the mating stud or use an approved repair kit—do not force a nut onto stripped threads.

$6.47

Compare At:: $7.12
You Save:: $0.65

Out Of Stock

Usually ships within 4 - 14 days

Add to Cart

Genuine Ge part

Hanger Mech

By: Ge

Part Number: WD1X1455

$4.45

Compare At:: $4.90
You Save:: $0.45

Out Of Stock

Usually ships within 4 - 14 days

Add to Cart

Genuine Ge part

Timer Knob

By: Ge

Part Number: WD9X304

$12.61

Compare At:: $15.50
You Save:: $2.89

Out Of Stock

Usually ships within 4 - 14 days

Add to Cart

Genuine Ge part

Pump Seal And Impeller Kit

4.9 (48)

By: Ge

Part Number: WD19X10032

This kit is used to repair a leaking pump on GE made dishwashers. For a complete pump/motor assembly get WD26X10013.

Do-It-Yourself Stories from Customers like You Leaking water onto the floor John G. • Canmer , KY • May 28, 2015

The main conduit was broken and the pump connector had a hole in it. The pump also was showing signs of leaking. I completely disassembled the dishwasher cleaned everything and reassembled. The repair videos are a big help. Thank you. Read more

Genuine Ge part

Check Valve

5.0 (3)

By: Ge

Part Number: WD1X5488

Do-It-Yourself Stories from Customers like You Slow drain, blocked drain was displaying on unit control panel on door of dishwasher and it kept shutting down Michael C. • Dunmore , WV • March 23, 2020

I got online to see what might be wrong with my unit and then see what parts were recommended to repair the problem. I found this site and ordered two parts a piston and nut assembly and a check valve if the piston and nut did not fix my problem. Once I received my parts I installed the piston and nut assembly first and that was all I needed to make it drain prperly. It is working great and pumping the water up to the disposer drain with great flow now. I did not need to buy a whole new... Read more

Genuine Ge part

Screw (12-Pack)

By: Ge

Part Number: WZ2X45D

Includes 12 screws.

Genuine Ge part

Tub Insulation

5.0 (2)

By: Ge

Part Number: WD01X10262

Do-It-Yourself Stories from Customers like You I had a problem with mice behind and on top of my dishwasher had to replace the insulation blanket Lee F. • Sonoita , AZ • November 09, 2018

Pulled it out and cleaned then replaced the blanket. Read more

Genuine Ge part

Hinge Arm Bearing

By: Ge

Part Number: WD12X231

Genuine Ge part

Shield & Clip Kit

By: Ge

Part Number: WD12X338

Genuine Ge part

Bracket Cover

By: Ge

Part Number: WD12X377

Genuine Ge part

Nut

5.0 (1)

By: Ge

Part Number: WD12X378

Do-It-Yourself Stories from Customers like You Dishes were not getting clean spray arm was not fully extending up and water hardly came out of spray arm you could open door half way and watch inside Don F. • Bellevue , NE • April 05, 2015

Replaced spray arm assembly, it's a different style than what was in the dishwasher but it's an easier style to work with. I also ordered support assembly and did not need it,spray arm assembly was all I needed. Read more

Genuine Ge part

Cam, Timer

By: Ge

Part Number: WD16X308

Genuine Ge part

Connector

5.0 (1)

By: Ge

Part Number: WD18X206

This has male threads. For female threads use WD18X214

Do-It-Yourself Stories from Customers like You There were pinholes in the old connector Steven D. • Muskego , WI • November 09, 2014

My husband removed the old connector and replaced it with a new one. My dishwasher is a GE and we bought it in 1992. Since then only a few parts needed to be replaced. I am not looking forward to looking for a new dishwasher since this one has lasted so long and still cleaning dishes. Read more