Kenmore Dishwasher 363.1444596 (3631444596, 363 1444596) Parts
Genuine Ge part
By: Ge
Part Number: WD28X10103
Replaces broken or cracked 3rd level spray arm assembly that mounts at the top of the tub. Includes mounting tabs and collar for secure installation.
Do-It-Yourself Stories from Customers like You
The top level (3rd level as called by ge/appliancepartspros) spray arm fell off Yuan S. • San Ramon , CA • June 27, 2014
There is a plastic "snapping" feature (Two plastic tabs that when pressed together can fit into the holes on the spray arm. Once in there, the tabs expands and keep the spray arm in place) that comes out of the top onto which the spray arm is attached to. That plastic piece broke and the spray arm fell off.
It wasn't clear how the snapping feature was attached to the top of the dishwasher at first. I was looking for a replacement for it and could not find it on any of the assembly diagram...
Read more
More
$52.28
- Compare At:
-
$79.84
- You Save:
-
$27.56
Genuine Ge part
By: Ge
Part Number: WD35X10011
White dishwasher lower spray arm assembly with collapsible tower. Replaces cracked, broken, or damaged spray arms. Installs at bottom of tub.
Do-It-Yourself Stories from Customers like You
1 not draining properly 2 not cleaning properly 3 not filling properly 4 not running properly 5 sump and sump cap was filthy 6 James W. • San Diego , CA • March 19, 2017
1. Replaced the Dishwasher motor and pump assembly. 2. Replaced the lower arm sprayer. 3. Replaced the Sump and filter. Replaced both the inlet and outlet hoses. 4. Replaced the Airgap. 5. Replaced Float Dome. 6. Replaced Water Inlet Valve.
Parts $220 for Dishwasher
Estimated Labor $400.00
Labor $0.00
Parts $100.00 for Pullout Faucet
Estimated Labor $175.00
Labor $0.00
Read more
More
$52.73
- Compare At:
-
$62.75
- You Save:
-
$10.02
Genuine Ge part
By: Ge
Part Number: WD12X324
Detergent cup not opening during wash cycle? This actuator lever connects the timer to the dispenser lid. Moderate DIY repair, about 35 minutes.
This part fixes the following symptoms
-
Will not dispense detergent
See more...
Do-It-Yourself Stories from Customers like You
Defective timer John K. • Bear , DE • October 20, 2016
The timer was replaced. It took about 35 minutes. The most difficult thing was holding the door down.
Read more
More
Genuine Ge part
By: Ge
Part Number: WD12X334
Fix dishwasher overflows or underfilling with a new water level float. This part regulates filling by rising with water to signal the switch.
Do-It-Yourself Stories from Customers like You
1 not draining properly 2 not cleaning properly 3 not filling properly 4 not running properly 5 sump and sump cap was filthy 6 James W. • San Diego , CA • March 19, 2017
1. Replaced the Dishwasher motor and pump assembly. 2. Replaced the lower arm sprayer. 3. Replaced the Sump and filter. Replaced both the inlet and outlet hoses. 4. Replaced the Airgap. 5. Replaced Float Dome. 6. Replaced Water Inlet Valve.
Parts $220 for Dishwasher
Estimated Labor $400.00
Labor $0.00
Parts $100.00 for Pullout Faucet
Estimated Labor $175.00
Labor $0.00
Read more
More
$12.49
- Compare At:
-
$14.99
- You Save:
-
$2.50
Genuine Ge part
By: Ge
Part Number: WD1X1392
Secures dishwasher sump to tub, maintaining seal compression to prevent leaks. Replace if corroded or weak. Confirm fit with your model number.
Do-It-Yourself Stories from Customers like You
Leaking pump connector. David M. • Ypsilanti , MI • October 13, 2018
Took the impeller out, removed the pump, replaced connector, put new clamps on, reassembled and checked for leaks. I just followed Arts video, went smooth. Wifes happy, things are good.
Thanks AppliancePartsPros.com
Read more
More
$13.95
- Compare At:
-
$16.60
- You Save:
-
$2.65
Genuine Ge part
By: Ge
Part Number: WD21X479
Dishwasher overflowing or not filling? This float switch detects water levels to prevent overflow and control filling. DIY-friendly repair part.
Do-It-Yourself Stories from Customers like You
The dish washer was not fill with water Stanley B. • Newberry Springs , CA • December 14, 2014
1. Removed the water inlet/shut off valve, removed and cleaned the screen. while the valve was removed applied electrical power to the valve and it worked just fine.
2. replaced the broken float switch.
Read more
More
$71.95
- Compare At:
-
$85.58
- You Save:
-
$13.63
Genuine Ge part
By: Ge
Part Number: WD3X721
Replaces worn or broken pump solenoid springs in your dishwasher. Restore smooth operation when original springs are damaged, missing, or weakened.
More
$57.22
- Compare At:
-
$68.09
- You Save:
-
$10.87
Genuine Ge part
By: Ge
Part Number: WD12X10026
Replacement door vent directs humid air out during the dry cycle. Install inside the door panel to replace a cracked, clogged, or missing vent.
Do-It-Yourself Stories from Customers like You
Worn out tired dishwasher with some broken parts Laura C. • Black Canyon City , AZ • January 03, 2017
Found AppliancePartsPros.com and looked up parts and ordered replacement parts. ( VERY easy!) Replaced the spray arm assembly and door vent via the handy Q&A repair section, as well as a thorough cleaning, and VOILA! Clean dishes again!! Thanks for making it easy!
Read more
More
$14.39
- Compare At:
-
$17.12
- You Save:
-
$2.73
Genuine Ge part
By: Ge
Part Number: WD1X1363
Metal contact leaf for dishwasher switch assemblies. Replace if the original contact is bent, corroded, worn, or missing to restore proper circuit closure.
More
$18.95
- Compare At:
-
$32.08
- You Save:
-
$13.13
Genuine Ge part
By: Ge
Part Number: WD2X425
Secures the soap dispenser lever assembly in your dishwasher. Replace if screw is missing, stripped, or damaged during dispenser repair or maintenance.
More
$6.72
- Compare At:
-
$8.36
- You Save:
-
$1.64
Genuine Ge part
By: Ge
Part Number: WD12X335
Guides the dishwasher float and connects it to the switch mechanism. Replace if cracked, broken, or worn to restore proper water level control.
Do-It-Yourself Stories from Customers like You
1 not draining properly 2 not cleaning properly 3 not filling properly 4 not running properly 5 sump and sump cap was filthy 6 James W. • San Diego , CA • March 19, 2017
1. Replaced the Dishwasher motor and pump assembly. 2. Replaced the lower arm sprayer. 3. Replaced the Sump and filter. Replaced both the inlet and outlet hoses. 4. Replaced the Airgap. 5. Replaced Float Dome. 6. Replaced Water Inlet Valve.
Parts $220 for Dishwasher
Estimated Labor $400.00
Labor $0.00
Parts $100.00 for Pullout Faucet
Estimated Labor $175.00
Labor $0.00
Read more
More
$26.74
- Compare At:
-
$30.68
- You Save:
-
$3.94
Genuine Ge part
By: Ge
Part Number: WD12X418
Fix dishwasher leaks or poor cleaning with a new sump cap. Seals the sump opening to contain wash water and protect the pump. Quick DIY replacement.
Do-It-Yourself Stories from Customers like You
1 not draining properly 2 not cleaning properly 3 not filling properly 4 not running properly 5 sump and sump cap was filthy 6 James W. • San Diego , CA • March 19, 2017
1. Replaced the Dishwasher motor and pump assembly. 2. Replaced the lower arm sprayer. 3. Replaced the Sump and filter. Replaced both the inlet and outlet hoses. 4. Replaced the Airgap. 5. Replaced Float Dome. 6. Replaced Water Inlet Valve.
Parts $220 for Dishwasher
Estimated Labor $400.00
Labor $0.00
Parts $100.00 for Pullout Faucet
Estimated Labor $175.00
Labor $0.00
Read more
More
$24.95
- Compare At:
-
$29.69
- You Save:
-
$4.74
Genuine Ge part
By: Ge
Part Number: WD2X295
Replacement mounting screw for dishwashers. Secures panels, brackets, or components inside the unit. Needed when original screws are stripped or missing.
More
$6.72
- Compare At:
-
$8.36
- You Save:
-
$1.64
Genuine Ge part
By: Ge
Part Number: WD3X487D
C-clip retainers secure components in your dishwasher or range. Replace when clips are loose, broken, or missing to prevent rattling and parts shifting. Verify fit with your model number.
More
$35.95
- Compare At:
-
$57.56
- You Save:
-
$21.61
Genuine Ge part
By: Ge
Part Number: WD2X5166
Replace missing or stripped dishwasher mounting screws. Secures internal components and panels. Essential hardware for reassembly after repairs.
Do-It-Yourself Stories from Customers like You
The shaft seal was leaking when dishwasher emptied Joe V. • Medford , NY • February 07, 2016
Ordered the necessary parts to fix it
Read more
More
$7.37
- Compare At:
-
$8.36
- You Save:
-
$0.99
Genuine Ge part
By: Ge
Part Number: WD13X67
Door won't close or latch properly? This latch keeper secures the door strike so your dishwasher stays closed during cycles. Quick DIY repair.
More
$40.95
- Compare At:
-
$48.73
- You Save:
-
$7.78