Kenmore Dishwasher 363.1479582 (3631479582, 363 1479582) Parts
Genuine Ge part
By: Ge
Part Number: WD12X339
$19.95
- Compare At:
-
$28.41
- You Save:
-
$8.46
Out Of Stock
Usually ships within 4 - 14 days
Genuine Ge part
By: Ge
Part Number: WD1X1289
This is a replacement mounting nut that secures components to their mating studs or shafts, restoring proper fit and preventing looseness that can cause noise or misalignment. Use it to replace a worn, stripped, or missing nut. What it does:
- Fastens parts to studs or shafts to keep assemblies secure and aligned.
- Prevents wobbling, rattling, and reduced performance caused by a loose or missing nut.
- Restores reliable mechanical connection after thread damage or corrosion.
- Works where a standard hex-style fastening nut is required by the OEM design.
What's included:
- One replacement mounting nut.
Install notes:
- Disconnect power and unplug the appliance before beginning work.
- Verify correct stud engagement and thread direction before tightening.
- Use the proper-sized wrench and tighten to the manufacturer's recommended torque; avoid over-tightening to prevent thread damage.
- If threads are damaged, replace the mating stud or use an approved repair kit—do not force a nut onto stripped threads.
More
$6.47
- Compare At:
-
$7.12
- You Save:
-
$0.65
Out Of Stock
Usually ships within 4 - 14 days
Genuine Ge part
By: Ge
Part Number: WD1X1330
$13.54
- Compare At:
-
$18.73
- You Save:
-
$5.19
Out Of Stock
Usually ships within 4 - 14 days
Genuine Ge part
By: Ge
Part Number: WD1X1350
$11.95
- Compare At:
-
$13.31
- You Save:
-
$1.36
Out Of Stock
Usually ships within 4 - 14 days
Genuine Ge part
By: Ge
Part Number: WD1X1351
$12.95
- Compare At:
-
$13.65
- You Save:
-
$0.70
Out Of Stock
Usually ships within 4 - 14 days
Genuine Ge part
By: Ge
Part Number: WD24X217
$14.95
- Compare At:
-
$20.30
- You Save:
-
$5.35
Out Of Stock
Usually ships within 4 - 14 days
Genuine Ge part
By: Ge
Part Number: WD34X730
$66.79
- Compare At:
-
$82.25
- You Save:
-
$15.46
Out Of Stock
Usually ships within 4 - 14 days
Genuine Ge part
By: Ge
Part Number: WD19X10032
This kit is used to repair a leaking pump on GE made dishwashers. For a complete pump/motor assembly get WD26X10013.
Do-It-Yourself Stories from Customers like You
Leaking water onto the floor John G. • Canmer , KY • May 28, 2015
The main conduit was broken and the pump connector had a hole in it. The pump also was showing signs of leaking. I completely disassembled the dishwasher cleaned everything and reassembled. The repair videos are a big help. Thank you.
Read more
More
Genuine Ge part
By: Ge
Part Number: WD24X214
Used to supply water to the upper spray washarm.
Do-It-Yourself Stories from Customers like You
Leaking upper spray hose Damon R. • Concord , NC • November 16, 2018
Followed the really great install video from the site. Didn't take long at all.
Read more
More
Genuine Ge part
By: Ge
Part Number: WD22X135
Do-It-Yourself Stories from Customers like You
The lower spray arm needed to be replaced on my dishwasher. Denise S. • Saint James , NY • September 19, 2018
I disconnected the spray arm housing from the bottom of the dishwasher. I took apart the spray arm housing to isolate the spray arm. I put the spray arm housing back together with the new spray arm and replaced the spray arm housing to the bottom of the dishwasher.
Read more
More
Genuine Ge part
By: Ge
Part Number: WD8X219
Do-It-Yourself Stories from Customers like You
Water would not drain out completely Danny D. • Hookstown , PA • January 18, 2016
The Piston and Nut assembly replaced
Check Valve and Body and gasket replaced
Read more
More
Genuine Ge part
By: Ge
Part Number: WD1X5488
Do-It-Yourself Stories from Customers like You
Our ge dishwasher model gsd580p49ba was not fully cleaning dishes after washing. we kept finding grainy food particles and debris deposited all over the dishes Mary H. • Boonsboro , MD • February 07, 2020
We removed the spray arm from the Spray Arm Hub and Support Assembly (GE part WD22X126) and discovered that the Check Valve (GE part WD1X5488), which prevents dirty water from flowing back into the tub, was missing completely. Replacement was very easy - the soft rubber valve pushes into position from the inside of the Support Assembly. We also found that the Plastic Thrust Washer (GE part WD3X766) inside the center of the Spray Arm Hub had eroded considerably, so we replaced that as well.
Read more
More
Genuine Ge part
By: Ge
Part Number: WZ2X45D
Genuine Ge part
By: Ge
Part Number: WD12X231
Genuine Ge part
By: Ge
Part Number: WD12X235
Do-It-Yourself Stories from Customers like You
Sprayer bearing was missing fill cap assembly was stripped out Brian T. • Beaufort , SC • September 22, 2015
Replaced Sprayer Bearing and Fill Cap Assembly
Read more
More
Genuine Ge part
By: Ge
Part Number: WD12X301