Kenmore Dishwasher 363.15329100 (36315329100, 363 15329100) Parts
Genuine Ge part
By: Ge
Part Number: WD18X202
Routes water from inlet valve to tub. Replace if cracked, leaking at connections, or worn from age. Installs between valve and tub exterior connection point.
Do-It-Yourself Stories from Customers like You
Dishwasher was making loud noises from the bottom when running Alan R. • Rochester , NY • June 30, 2018
I replaced the pump and motor assembly. I also proactively replaced the fill hose while I had the dishwasher out since it was decades old.
GE now only sells a generic kit. There were about 7 different sets of directions for different groups of models, and myriad adapters and other parts to support all of them. I wish GE had provided a way of looking up which instructions to use based on model # as that would have saved me a lot of trouble sorting out the instructions, but I didn't find one....
Read more
More
$18.95
- Compare At:
-
$53.68
- You Save:
-
$34.73
Genuine Ge part
By: Ge
Part Number: WD02X10061
Stainless steel hex washer head screw secures dishwasher panels, trim, and internal components. Replace when stripped, corroded, or missing.
Do-It-Yourself Stories from Customers like You
Upper sprayer arm was broken. Gerald P. • Las Vegas , NV • January 18, 2021
Replaced it with a new part.. Took about 30 minutes. Relatively easy fix.
Read more
More
$6.72
- Compare At:
-
$8.36
- You Save:
-
$1.64
Genuine Ge part
By: Ge
Part Number: WD02X10066
Thread-forming screw secures dishwasher panels, brackets, and trim components. Replace missing or stripped fasteners to restore proper mounting.
More
$7.37
- Compare At:
-
$8.36
- You Save:
-
$0.99
Genuine Ge part
By: Ge
Part Number: WD02X22736
Secures panels, brackets, and hardware in your appliance. Replace when stripped, rusted, or missing to prevent looseness and vibration. Verify fit.
More
$7.37
- Compare At:
-
$8.36
- You Save:
-
$0.99
Genuine Ge part
By: Ge
Part Number: WD01X10065
Secures dishwasher drain or inlet hoses to fittings to prevent leaks and slipping. Replace when loose, corroded, or during hose installation. Verify fit.
Do-It-Yourself Stories from Customers like You
The dishwasher would not drain sometimes Thomas W. • Oceanside , CA • October 02, 2016
I replaced the pump drain assembly. The flapper valve was included in the assembly, so I did not need to order that. On previous repairs, the old drain hose was tricky to reinstall, so I replaced it and the hose clamp.The silverware basket had holes in the bottom and required replacement. I had some broken tine clips.
Read more
More
Genuine Ge part
By: Ge
Part Number: WD2X296
8-32 x 5/8 inch screw secures inner door panel to outer door panel along edge. Replace stripped, missing, or corroded screws during door repairs.
Do-It-Yourself Stories from Customers like You
Soap door would not lock closed Mark F. • Laguna Woods , CA • September 18, 2017
This happened after a repair man came out and replaced the timer. Not my doing landlord had a service contract. Once inspected I found when the timer was swapped he did not swap the cam over. Ordered the correct parts and repaired myself. Hard to find good help anymore.
Read more
More
$9.80
- Compare At:
-
$10.56
- You Save:
-
$0.76
Genuine Ge part
By: Ge
Part Number: WD3X767
Seal washer that sits between the dishwasher pump and motor assembly. Replace if cracked, deteriorated, or causing leaks beneath the pump housing.
More
$7.37
- Compare At:
-
$8.36
- You Save:
-
$0.99
Genuine Ge part
By: Ge
Part Number: WD2X444
Replacement mounting screw for dishwashers. Secures internal components, panels, and brackets. Needed when original screws are stripped, missing, or lost.
More
$7.37
- Compare At:
-
$8.36
- You Save:
-
$0.99
Genuine Ge part
By: Ge
Part Number: WD28X31819
Lower dishrack assembly for dishwasher bottom level. Holds plates, pots, and pans during wash cycles. Replace if rusted, cracked, or tines broken.
Do-It-Yourself Stories from Customers like You
Deteriorating racks Robert M. • Hallsville , MO • January 17, 2015
Replaced the upper and lower racks. AppliancePartsPro shipped the racks fast and they are a perfect fit. I think they're even a better, stronger design then the factory originals.
Read more
More
$133.67
- Compare At:
-
$159.07
- You Save:
-
$25.40
Genuine Ge part
By: Ge
Part Number: WD31X10141
Trim piece that surrounds and protects the timer on your dishwasher control panel. Replace if your original cover is cracked, faded, or missing.
Do-It-Yourself Stories from Customers like You
Dishwasher timer went bad Jeff F. • Monticello , KY • September 23, 2025
Accidently threw away EVERYTING that was attached to the timer, but Appliance Parts Pros had what I needed, except the screws, but I was able to figure out what screws I needed.
Hardest part was figuring out where the off position was on the timer.
Read more
More
$10.95
- Compare At:
-
$13.37
- You Save:
-
$2.42
Genuine Ge part
By: Ge
Part Number: WD12X447
$48.47
- Compare At:
-
$48.89
- You Save:
-
$0.42
Genuine Ge part
By: Ge
Part Number: WD21X10181
This push button switch assembly replaces a worn or unresponsive control button to restore reliable user input on the appliance. It provides a firm tactile response so commands register correctly at the control panel. What it does:
- Acts as the user-facing push button that completes the control circuit when pressed
- Restores responsiveness when buttons are stuck, intermittently work, or fail to actuate
- Helps eliminate missed starts or unrecognized button presses at the console
- Fits into the control panel and interfaces with the appliance's internal switch contacts
What's included: One push button switch assembly. Install notes:
- Disconnect power to the appliance before starting any repair to avoid shock or injury
- Access may require removing the control panel; keep fasteners and trim in a safe place
- Handle connectors gently—disconnect and reconnect wiring harnesses by the plug, not the wires
More
$147.95
- Compare At:
-
$158.85
- You Save:
-
$10.90
Genuine Ge part
By: Ge
Part Number: WD1X1376
Secures hoses and wiring in your dishwasher to prevent leaks, rubbing, and noise. Replace if damaged or loose to restore stable routing. Confirm fit.
Do-It-Yourself Stories from Customers like You
Multiply holes in pump connector Richard H. • Highland , NY • October 31, 2014
Replaced connector. The job took about 1 hour, most of which was spent getting the machine out from under the counter. Replacing the actual part did not take long at all.
Read more
More
$21.50
- Compare At:
-
$25.37
- You Save:
-
$3.87
Out Of Stock
Usually ships within 4 - 14 days
Genuine Ge part
By: Ge
Part Number: WD01X10086
Secures and positions the heating element in your dishwasher. Replace if cracked, bent, or broken to restore proper element alignment and stability.
Do-It-Yourself Stories from Customers like You
The heating element went bad so i looked it up and ordered it from you guys shipping was very fast and it was the perfict fit Huey M. • Braggcity , MO • December 19, 2014
Followed instructions from your video and in no time had it replsced.
Read more
More
$9.95
- Compare At:
-
$11.84
- You Save:
-
$1.89
Out Of Stock
Usually ships within 4 - 14 days
Genuine Ge part
By: Ge
Part Number: WD01X10110
Secure wire harnesses in your dishwasher with this harness clip. Replace if wires are loose or clip is broken. Verify fit with your model number.
More
$6.72
- Compare At:
-
$8.36
- You Save:
-
$1.64
Out Of Stock
Usually ships within 4 - 14 days
Genuine Ge part
By: Ge
Part Number: WD02X10141
Replacement hex head screw for dishwasher component mounting. Secures solenoids, valves, and internal parts. Order when original is rusted, stripped, or missing.
Do-It-Yourself Stories from Customers like You
The drain solenoid on dishwasher leaked and rusted where wouldn't work Webster M. • Memphis , TN • September 19, 2014
Ordered complete solenoid kit, valve seal, and sol mounting screws. Watched repair video and it works great.
Read more
More
$6.72
- Compare At:
-
$8.36
- You Save:
-
$1.64
Out Of Stock
Usually ships within 4 - 14 days