Kenmore Dishwasher 363.1556993 (3631556993, 363 1556993) Parts

Genuine Ge part

Pump Seal And Impeller Kit

By: Ge

Part Number: WD19X10032

This kit is used to repair a leaking pump on GE made dishwashers. For a complete pump/motor assembly get WD26X10013.

Do-It-Yourself Stories from Customers like You Leaking water onto the floor John G. • Canmer , KY • May 28, 2015

The main conduit was broken and the pump connector had a hole in it. The pump also was showing signs of leaking. I completely disassembled the dishwasher cleaned everything and reassembled. The repair videos are a big help. Thank you. Read more

Genuine Ge part

Water Supply Hose

4.9 (18)

By: Ge

Part Number: WD24X214

Used to supply water to the upper spray washarm.

Do-It-Yourself Stories from Customers like You Leaking upper spray hose Damon R. • Concord , NC • November 16, 2018

Followed the really great install video from the site. Didn't take long at all. Read more

Genuine Ge part

Valve Body Gasket

5.0 (10)

By: Ge

Part Number: WD8X219

Do-It-Yourself Stories from Customers like You Water would not drain out completely Danny D. • Hookstown , PA • January 18, 2016

The Piston and Nut assembly replaced Check Valve and Body and gasket replaced Read more

Genuine Ge part

Screw (12-Pack)

By: Ge

Part Number: WZ2X45D

Includes 12 screws.

Genuine Ge part

Tub Insulation

5.0 (2)

By: Ge

Part Number: WD01X10262

Do-It-Yourself Stories from Customers like You I had a problem with mice behind and on top of my dishwasher had to replace the insulation blanket Lee F. • Sonoita , AZ • November 09, 2018

Pulled it out and cleaned then replaced the blanket. Read more

Genuine Ge part

Shield & Clip Kit

By: Ge

Part Number: WD12X338

Genuine Ge part

Bracket Cover

By: Ge

Part Number: WD12X377

Genuine Ge part

Nut

5.0 (1)

By: Ge

Part Number: WD12X378

Do-It-Yourself Stories from Customers like You Dishes were not getting clean spray arm was not fully extending up and water hardly came out of spray arm you could open door half way and watch inside Don F. • Bellevue , NE • April 05, 2015

Replaced spray arm assembly, it's a different style than what was in the dishwasher but it's an easier style to work with. I also ordered support assembly and did not need it,spray arm assembly was all I needed. Read more

Genuine Ge part

Heating Element Washer

By: Ge

Part Number: WD1X1168

Genuine Ge part

Terminal (12-Pack)

5.0 (2)

By: Ge

Part Number: WD1X1434D

Includes 12 terminals.

Do-It-Yourself Stories from Customers like You Terminal receptacle was fried Phillip M. • Indianapolis , IN • May 12, 2015

I had to replace the 3 terminals and try to put them in the new terminal receptacle. I replaced the lid switch because I broke the old one trying to diagnose the problem. I found the helpful video on this site after I had already started. Read more

Genuine Ge part

Solen Bracket

5.0 (1)

By: Ge

Part Number: WD1X1439

Do-It-Yourself Stories from Customers like You The drain solenoid on dishwasher leaked and rusted where wouldn't work Webster M. • Memphis , TN • September 19, 2014

Ordered complete solenoid kit, valve seal, and sol mounting screws. Watched repair video and it works great. Read more

Genuine Ge part

Check Valve And Body Assembly

4.8 (6)

By: Ge

Part Number: WD22X10024

Do-It-Yourself Stories from Customers like You Water would not drain out completely Danny D. • Hookstown , PA • January 18, 2016

The Piston and Nut assembly replaced Check Valve and Body and gasket replaced Read more

Genuine Ge part

Filter Frame

5.0 (1)

By: Ge

Part Number: WD22X149

Do-It-Yourself Stories from Customers like You Triton dishwasher (2002) not draining Back I. • Strongsville , OH • July 01, 2016

I originally thought it was just accumulated dirt and sludge in the sump and the lines. I cleaned all that and it was not the cause. Saw this video...took off the filter frame and the piston & nut assembly was definitely broke (cap deteriorated to nothing). Need pliers to break it free as in the video. I accidentally ripped the screen taking off the filter frame, and saw a hole from the heating rod on top of the inlet cover so I replaced them too. Very easy replacement project once it was... Read more