Parts for Craftsman 249-620: Parts Parts

This is an oil filter designed for use in larger gasoline-powered landscaping and outdoor equipment such as log splitters and chippers. An oil filter is an essential safeguard to maintain a good operating condition and ensure long life in a gas engine. Oil filters remove toxic chemicals as small pieces of debris that can end up in the engines. Because these contaminants, if improperly removed, could also end up in the air or in the environment in other ways, oil filters must be meet EPA emission regulations. This filter not only meets federal environmental standards but also is an OEM guaranteed replacement part that is manufactured to the identical specification of the original parts being replaced. By the very nature of what it's supposed to accomplish, eventually, the filter will need to be replaced. Over time the filter's elements will become full of debris, and failing to replace it in a timely manner runs the risk of allowing the captured pollutants to escape back into the engine oil. When replacing the old filter, make sure to follow environmental guidelines as well, disposing of the oil and filter according to posted regulations. Replacing the filter is the ideal time to replace the engine oil as well. This filter is compatible with Husky, Cub Cadet, Troy-Bilt, Yard-Man, and MTD equipment.

A cotter pin is a standard piece of hardware typically used on lawn and garden equipment as a method of securing something to an axle or round shaft. These pins are thin and, although they are durable, they can rust or become damaged over time. In some instances, they can break off or become lost in the process of other repairs. A replacement with the right size and style of cotter pin will ensure that equipment is in working order at all times. This genuine OEM cotter pin replacement can be used with select lawn and garden equipment from MTD, Huskee, Yard Man, Yard Machines, Troy-Bilt, Bolens, Cub Cadet, and Murray. It can be used on lawn tractors, log splitters, chipper/shredder units, and snowblowers. There are more than 150 compatible units, so owners should consult their parts diagram for application(s) of this pin. Note that this pin may have multiple applications on a single machine. This cotter pin is sold individually and may require needle nose pliers to replace.

This hubcap is an authentic OEM replacement part sourced directly from the manufacturer for use on log splitter and chipper wheels. The hubcap covers the central opening of the wheel assembly. This prevents dirt and debris from getting into the wheel assembly. If the hubcap comes off during use or is lost when replacing tires, a new one should be installed. The machine will work without a hubcap; however, the interior wheel assembly will be open to flying debris and could be damaged if rocks or large limbs go into the wheel assembly. During routine inspection and maintenance, the hub caps should be checked for damage and to make sure they are in place.The hubcap is easily removed and replaced with a screwdriver needed to pry the old hubcap off if it is still on the machine. The new hubcap simply snaps into place. This hubcap is made of high-quality metal and is sold individually. This hubcap is designed to be used with log splitters and chippers manufactured by MTD, Cub Cadet, Troy Bilt, Husky, and Yard-Man.

This is a genuine replacement bolt that is designed specifically for use on select lawn tractors. This tractor bolt is a specialty piece of hardware designed for use on the steering segment gear. This screw holds the gear in place and is exposed to constant vibrations and repetitive motion as a result. Over time, that can result in damage, wear, or even total breakage of the bolt and require a replacement. If the bolt isn't functional or is missing, the steering segment gear will not be secured and that can lead to further damage if left unattended. Using a genuine replacement part like this will guarantee an exact fit for compatible models. This genuine OEM gear bolt is manufactured by MTD. It is compatible with lawn and garden equipment from RYOBI, HUSKEE, Troy-Bilt, Bolens, Yard Machines, Yard Man, and Cub Cadet, along with select models from MTD. The bolt works for more than 100 compatible models. It is made of durable metal and sold as an individual unit. A wrench or socket will be required to replace this part. Always wear gloves when performing repairs on lawn and garden equipment and allow the engine to cool before doing any work.

This part is a replacement hex bolt. This is a genuine OEM part made by MTD and has been sourced directly from the manufacturer. This part can be used to replace a broken, stripped or defective hex bolt in outdoor power equipment.Hex bolts are a standard piece of hardware that have many different functionalities. They are named for their hexagon shaped heads. Bolts are essential for securely holding together different equipment parts but can become corroded, stripped, or misplaced, requiring replacement. It's important when working on or near an engine to make sure the equipment is powered off and completely cooled down before starting any repairs. For more accurate information on how and where to install this hex bolt, the appropriate owner's manual and equipment diagrams should be utilized.As an authentic replacement part, this hex bolt is suitable for use on several outdoor power equipment manufactured by MTD, Craftsman, and other brands. Please This is a genuine part made of high-quality, durable metal and is sold individually.

This nipple pipe is a genuine MTD part, sold individually. This nipple pipe can be used as a replacement part for lawn mowers, edgers, log splitters, and wood chippers. The purpose of a nipple pipe is to serve as a fastening connector for various components with female threads, as nipple pipes have male threads on either end.The nipple pipe is a small component, so it can easily be lost or misplaced while the outdoor appliance is in operation. Additionally, the nipple pipe can be stripped over time so it cannot fasten components to one another. If this occurs, the component should be removed and replaced by this genuine OEM replacement part. Remember to always wear gloves when handling, repairing, and operating outdoor equipment. Always unplug the appliance before performing any kind of repair or replacement.This is an OEM part sourced directly from the manufacturer. It is sold individually. This nipple pipe is compatible with the following outdoor appliance brands: MTD, Yard Machines, Cub Cadet, Troy-Bilt, Huskee, Yard Man, and MasterCut.

This hex bolt is a genuine MTD part, sold individually. This hex bolt can be used as a replacement part in lawn mowers, edgers, log splitters, and wood chippers. The purpose of the hex bolt for these outdoor appliances is to serve as a fastening component in conjunction with a nut so that one or more components can be held together with the aid of this fastener.The hex bolt in an outdoor appliance might need to be replaced if it is lost, misplaced, or stripped. If the hex bolt is lost or misplaced, it should be replaced by this genuine OEM replacement part. If the hex bolt suffers damage in the form of scraping, denting, cracking, or eroding over time, the component should be replaced immediately.This component is a genuine OEM replacement part sourced directly from the manufacturer. It is sold individually. This hex bolt is compatible with the following outdoor appliance brands: MTD, Craftsman, Cub Cadet, Ryobi, Yard Machines, Huskee, Yard Man, and MasterCut.

This part is an adjustable gib that is used on log splitters and chipper shredders. This component is also called a keyway. The adjustable gib locks two shafts together so that they can rotate.A new adjustable gib may be needed if the shaft is freely spinning and will not spin with the drive shaft. If the adjustable gib is cracked, broken, or damaged in any way, it will need to be replaced. Remember to wear gloves when operating or performing care and maintenance on any outdoor power equipment. Never perform care and maintenance on outdoor power equipment that is powered on.This adjustable gib is a genuine MTD part. It is sold individually. This specific adjustable gib is compatible with log splitters and chipper shredders that are manufactured by MTD, Yard Machines, Cub Cadet, Yard-Man, Husky, and Troy-Bilt.

This part is a replacement floating gib plate. This is a genuine OEM part made by MTD and has been sourced directly from the manufacturer. It can be used to replace a broken or defective floating gib plate in a variety of different log splitter models.The floating gib plate works to support the wedge assembly and keep it in good alignment. This part can become worn or broken over time and will require replacement to keep the equipment functioning properly. Proper tools may be required to install this part. When working on or near an engine, ensure the equipment is powered off and completely cooled down before starting any repairs. For more accurate information on how and where to install this floating gib plate, the appropriate owner's manual and equipment diagrams should be referenced. As an authentic replacement part, this floating gib plate is suitable for use on several different models of lawnmowers manufactured by MTD. Please note that this is a genuine part made of high-quality, durable materials and is sold individually.

This hex screw is a genuine MTD part, sold individually. This hex screw can be used as a replacement part in a lawn mower or a log splitter. The purpose of a hex screw for one of these small engine outdoor appliances is to serve as a fastening component.The hex screw in a lawn mower or a log splitter might have to be replaced at some point within the typical lifespan of the appliance. This could occur if the hex screw has been lost, misplaced, or damaged. If this occurs, the hex screw should be removed and replaced by this genuine OEM replacement part in order to guarantee safe usage of the appliance.This component is a genuine OEM replacement part sourced directly from the manufacturer. It is sold individually. This hex screw is compatible with the following outdoor appliance brands: MTD, Craftsman, Cub Cadet, Troy-Bilt, Yard Machines, Montgomery Wards, Yard Man, and MasterCut.

The replacement screw seen here is made from high-quality, durable metal. It is an identical replacement for a faulty screw in many types of lawn and garden equipment. The screw features a hex-bolt shaped head and is used for various applications in the machines. Owners will want to refer to diagrams of their model to ensure the correct application for the screw. A screw may need to be replaced for any number of different reasons. In some cases, the screw could become lost when making other repairs to the machine. It could also become bent or the threads could be damaged. Corrosion is also a possibility over time. Replacing the screw is typically considered a fast and easy repair. The screw is a genuine OEM replacement part that is sold individually. The screw can be used for many models of snowblower, lawnmower, chainsaw, tiller, string trimmer, log splitter, edger, and wood chipper. Compatible brands include Craftsman, Cub Cadet, Troy-Bilt, Murray, Yard Machines, MTD, Huskee, Montgomery Wards, Bolens, Yard-Man, and MasterCut.

This part is a replacement stripper half. This is a genuine OEM part made by MTD and has been sourced directly from the manufacturer. It can be used to replace a broken, detached or malfunctioning stripper half in a variety of different log splitter models.The stripper helps to remove a partially split log if it gets stuck within the wedge assembly. This enables the log splitter to remain clear and unclogged of debris and keeps it functioning properly. This part is subject to wear and tear and may require replacement within the lifespan of the equipment. Wear work gloves to protect the hands when replacing equipment parts. Additionally, when working on or near an engine, ensure the equipment is powered off and completely cooled down before starting any repairs. For more accurate information on how and where to install this stripper half, the appropriate owner's manual and equipment diagrams should be referenced. As an authentic replacement part, this stripper half is suitable for use on several different models of log splitters manufactured by MTD. Please note that this is a genuine part made of high-quality, durable metal and is sold individually.