Katie September 06, 2025 for Model Number SHE43RF5UC/64 I need a new door strike plate my Bosch Dishwasher model SHE43RF5UC/64. Please can you let me know which part no. I should be looking for?
1 Answer katie, For the door strike, it would be the latch part number 00187185 and the part that this goes into will be 00654621. Read More...
Ron February 29, 2024 for Model Number Cove DW2450 Need a door latch, striker plate AND switch. Is that available? Thank you. R
Mike O February 24, 2019 for Model Number SHU5312UC/U11 I need a door latch & strike plate Without Micro switch. I can't find the part even though the closest thing I can find is a Mfr. Part # 00419827 . Do you have the right part # for this door latch ? My appliance model # SHU5312UC/U11 is for a Bosch Dishwasher . Thanks for the help ! Mike
1 Answer Mike, The part number for the door latch on this unit would be 00165243. The door strike will be 00165253. Read More...
1 Answer Hello Alex, We need the model number from the units' I.D. tag to look up the part numbers that the manufacturer recommends. We apologize for the inconvenience but this is the only way we can look at exactly what you have and the exact part number for the unit in your home. Please post a new question with this information and we will happily get you the correct part number. Thank you for your patience and understanding in this matter. Read More...
John March 12, 2016 for Model Number Bosch Dishwasher Model SHU5316UC/U06 The door wouldn't latch so I replaced both the door latch and the striker plate but the door still won't completely latch. It will latch and then pop open again.
1 Answer John, You will want to check the levelness of the unit which could cause the door latch to not catch the strike properly. Also if the strike can be adjusted then it may need a slight adjustment. Read More...
Miles January 09, 2015 for Model Number Bosch shu5305 uc/14 Dishwasher stopped before end of cycle. It won't start, no indicator light activated.
1 Answer Miles, You will want to check the door switches to make sure that they are good. The switches should have continuity when pushed. If the door switches checks ok then test the control module to make sure that there is 120 vac getting to the board when the latch is pushed in. If there is 120 vac then the control module would be the issue. Read More...
Rosemarie A September 24, 2014 for Model Number DWHD64CP/22 Dishwasher will not close? There is nothing in the way. Is latch broken?
1 Answer Hello Rosemarie. You will need to check the latch and strike to see if they are broken and need to be replaced. You need to disassemble the door to do this. Read More...
Phil June 16, 2014 for Model Number SHU4002UC - Bosch dishwasher I ordered the door latch and have installed it correctly. Now they want me to replace the strike plate. I am having a hell of a time getting the old strike plate out. What's the secret?
1 Answer Hello Phil, You will need to pull the dishwasher out a few inches to access the strike so it can be replaced. It actually clips in with the small knotch on the strike. You sometimes have to carefully bend the frame to get the old one out but try not to bend it in a manner that it cannot be bent back so the new one can stay in position. Read More...
1 Answer Hello Norm. Based on the information you provided, it sounds like the latch is broke. You will need to remove the door panel to check and see and if so, replace the latch assembly 00419827. Read More...
Dan January 17, 2012 for Model Number SHU6805 Top exterior control panel works just fine! The handle use to have a "some kind of a cover" I think it was black. It has been gone for years. The top Stainless steel decorative cover is a bit loose. Do you know the part I am talking about and would this tighten up the top panel?
1 Answer Hello Dan! The door handle on SHU6805 models doe have a cover available. We will need your full appliance model number to verify the correct part number for your unit. Make sure that any screws in the panel are tight and have not come loose. Thanks. Read More...