Lee August 17, 2017 for Model Number FAM18ER2A I have a 2006 air conditioner and my switch board is out, i look for a replacement part( #AP3969548),but when i check with the appliance compatibility tool, it doesn't match,could you help me find the right part or an updated part that is compatible with my ac, thank you, Lee J.
1 Answer Hello Lee. There should be some extra numbers on the end of the model number. If not, you will need to order 5304459472. But you will want to make sure since it is an electrical part. Thank you. Read More...
Deborah May 25, 2017 for Model Number FAM18HR2A1 with Serial # K64864119 My Mom's Unit has stopped heating, but is still cooling. What part do you recommend to correct this? The control panel or the PC Board?
1 Answer Deborah, It would be recommended to test to see if the heater is good on the unit. If the heater has continuity then the main control board would be the issue. If there is no continuity then the heater would need to be replaced. Read More...
Rafael August 13, 2016 for Model Number FAS256R2A The controls are locked up. They do not respond to any function but it does light up.
1 Answer Hello Rafael. It sounds like the control panel 5304459594 may be bad on the unit. We will need your full model number to help you with this. Please call 1-877-477-7278 or post your full model number with a new question on the parts page. http://www.appliancepartspros.com/modelnumber_locator.aspx Read More...
Joe E August 10, 2016 for Model Number FAM18HR2A My unit is a A/C and Heater. I do not have a remote, and also the display panel is broke and can not also use that either to control it. I just plug and unplug it to to work. What do I need to replace to control my unit without having to plug and unplug it from the wall??
1 Answer Joe, Since the unit operates, you'd want to start with the 5304459472 / 5304459473 PC Board, and 5304459472 5304459472 PC Board Switch, since it's damaged ? The remote control 5304459455 / 5304459455 is available and in stock, should you decide to expend the extra money for the convenience. Thanks, Read More...
David S July 25, 2016 for Model Number fam18er2a I have power at outlet, yet when off/on is pushed, unit fails to turn on. Do I need a new touchpad?
1 Answer Hello David. You will need to check and see if the touch pad is bad or if the control board has failed on the unit. Read More...
Ashley June 16, 2016 for Model Number FAM18HR2A1 Hello, I'm having trouble with my 18,500 BTU Air conditioner / 16,000 BTU heat and elec. controls unit. Control panel blinking and beeping turning the time and other settings on and off and got up this morning to my unit had turned itself off and I couldn't turn it on manually nor with the remote and am trying to figure out if I need the main control board or board switch. If you could help with this I would greatly appreciate it.
1 Answer Hello Ashley. You will need to order and replace the PC board 5304459472 in the unit. Read More...
Sam January 06, 2016 for Model Number FAM18HR2A1 The unit runs and cools when plugged in but you cant change any of the settings such as temp or mode either manually or with remote.
1 Answer Hello Sam. It sounds like the PC board 5304459472 is bad and will need to be replaced on the unit. Read More...
Mark C July 30, 2014 for Model Number FAM18HR2A1 When in energy saver mode, the unit will stop the fan occasionally (normal), but the compressor will continue to run. Which board (brain) do I need and is it worth repairing. This unit is just over one year old.
1 Answer Mark, The PC board that would be needed for the issue that you are experiencing will be part number 5304459460. Read More...
John B. January 30, 2014 for Model Number Es300 When we use the oven, the led panel when while baking goes blank erasing all function and the oven quits. Then after several minutes it lights back up with a blinking time and we reset it to use the oven but later goes blank again.
1 Answer Hello John, This could be a bad breaker, a poor electrical connection in a junction box, a bad receptacle, (if applicable), or a weak thermal cutout. We do need the model number from the units' I.D. tag so we know exactly what model we need to help troubleshoot. Read More...
Ryan February 21, 2013 for Model Number fam18hsa My unit recently just start to blow cold air on heat cycle but when you cut it off and put it on heat it works and then after a while blows cold air.
1 Answer Hello Ryan. Based on the information you provided, it sounds like the relay is sticking on the control board. You will need to order and replace the board on the unit if this is happening. You can test this with a multi-meter TJMA-DMT3. Here is a link on how to use a multi-meter. http://forum.appliancepartspros.com/oven-repair-including-ranges-cooktops/4810-how-check-continuity-ohmmeter.html Read More...