Sonny November 20, 2020 for Model Number Model# 92002102 I cannot see my temperature when I turn on the oven on pre-heat
1 Answer Sonny, this could be caused by a failed display or control. However, the model number provided appears to be a partial model. If the full model number could be provided in a new question, this will allow for the most accurate information to be presented. Read More...
Dale P December 01, 2018 for Model Number JVM2052DN2WW (GE) GE microwave The touch pad will not work for no1 and exhaust fan will not work/ repairable or throw away the microwave
1 Answer Dale, For this issue the door would need to be replaced and would be part number WB55X10946. Read More...
Robert J July 22, 2018 for Model Number FEFL64FSD Do you have a decal set to replace the numbers and burner locations on the backguard item 19 on the drawing? Most of my burner control numbers have come off from cleaning.
1 Answer Robert, Unfortunately the decals would be part of the control panel and it would need to be ordered for this. Read More...
Raymond G. January 12, 2018 for Model Number RES30QB S/N 9708 & UP I cannot read the oven temperature. It is too dim.
1 Answer Hello Raymond, This would be caused by a failed low voltage transformer on the clock assembly 00486752 that powers the display. I'm sorry but this part has been discontinued by the manufacturer and no satisfactory substitutions have been provided. Thank you for your patience and understanding in this matter. Read More...
Roger March 29, 2014 for Model Number fefb68csb A quarter sized ring over the Bake button is loose and about to detach itself from the rest of the panel. Do I only need to purchase the overlay to fix this or is IT part of the panel behind it that I would also need to replace? How do I repair this?
1 Answer Roger, Based on the description it sounds like the overlay would be the only thing required but you will need to check the clock to make sure that the plastic housing is not broken otherwise the same situation would happen. Read More...
Patricia January 29, 2014 I have a GE gas range stove model# JGBP79BEW1BB serial# ZS230894P when tryin to turn my oven on or set the time with the touch panel it won't work.
1 Answer Patricia, With the controls not working on your unit, the issue would not be with the overlay but would be caused by a faulty clock WB12K19. Unfortunately the clock has been discontinued by the manufacturer with no replacement available. Read More...
Toney October 02, 2013 for Model Number model number fef355asj/ part number 316220804 How do I put on the stove/oven/range clock overlay. I need to scratch off the old one and put a new one on. I already ordered the new overlay from you all.
1 Answer Toney, The overlay is a sheet that you peel off the old and stick on the new overlay to the clock. Read More...
Jim May 01, 2013 for Model Number vs30205392 What year was this model made? Model glef378aqf, serial vs30205392.
1 Answer Jim, this product could have been manufactured January of 1993 or 2003 or 2013. It would be best to contact the manufacturer to verify the year. Thanks. Read More...
Earlie March 10, 2013 for Model Number model #FEB367ASB Will the part # AP2126498 (clock overlay) replace my clock overlay on my frigidaire stove/oven model number FED367ASB?
1 Answer Hello Earlie! Unfortunately, the manufacturer does not offer the overlay separate from the electronic control 318185446 for model FED367ASB. Sorry! Read More...
Josephine December 02, 2012 for Model Number GLEF378CSB Can you reuse the oven clock panel cover? If so, what is that the best way to detach it?
1 Answer Hello Josephine, sometimes the clock overlay 316220804 can be removed and replaced by simply just peeling it off the oven control 316207529 but be careful not to kink it. If it will not stick on the new control, it's probably best to replace it at that point. Thanks! Read More...