Mary G May 10, 2018 for Model Number FEFLM605DSB Can you send instructions for replacing the oven door cap?
1 Answer Mary, To remove the door handle for this unit you will need to open the door and remove the 2 screws from the top inner door and the handle will come off. Read More...
Justin September 27, 2017 for Model Number FEFL77ABF I had ordered a replacement door handle (in full disclosure I did not order it from this website) and according to most part suppliers and my online research should be 316270200 for the door handle with door handle screws 316433300. However when I received these items the door handle, although the right color, shape, size, etc. did not have a metal insert in the back of the handle with threads for screws, as the door handle for my oven does. Also, the screws that were ordered were longer and thicker than the screws that hold the door handle on my oven. Is there another door handle for this model oven that I'm not aware of? Or do I need to order a different part number? Any assistance I could get here would be very helpful. I have tried emailing several parts suppliers in addition to yourselves to try to address this issue. Thank you in advance for your time.
1 Answer Hello Justin, the parts you ordered for your unit are a manufacturer replacement and correct for the model number. The replacement screws required to install the new handle are self tapping which is why they are thicker and no metal insert is needed on the handle. Thanks! Read More...
1 Answer Caroline, The screws for the door handle do not come with the handle5304537685. The part number for the screw is 316433300. Read More...
John Merli (Repeat Customer) October 25, 2016 for Model Number FEF366DCE The bottom drawer handle popped off. Don't know if I kicked it or not...had a pot of boiling water in my hands. There are two very small screws holding it on but one is missing. Do you think the handle mounts are stripped?If so, what screws do I need when I order the handle #39 (Same as oven door with different screws?) Thank you
1 Answer John, The replacement mounting screws for the drawer handle 5304537685 are part number 316278700 / 316433301. We would recommend you replace both screws at the same time. The parts are in stock and available at this time. Thanks, Read More...
Forrest January 15, 2015 for Model Number FGFL67DCD Is there a compatible replacement handle made of metal?
Elaine D. September 27, 2014 for Model Number FEFB66ECB I am ordering a door handle, what is the part # for the screws to mount this handle. They are stripped. I would rather pay more and have them included then hunt around for the part #. Thanks
1 Answer Hello Elaine! You will want to order mounting handle screw part number 316433303, thanks! Read More...
Repairsalot May 01, 2014 for Model Number FES367ABB Handle on door is completely missing. What parts do I need to order to replace-- handle, screws, etc. Also-- do i need to remove and open the door to replace? Where are the screws for the door located -- top, bottom, back?
1 Answer Hello! The door handle is part number 5304537685 and the screw is part number 5304414648. You will need to determine how to remove the door on the model number you are working on. If you open the door to the first stopping point, some oven doors will lift off the unit in this position. On other models, you will see clips on the back of the hinge toward the opening where the hinge enters the range. If yours is like this, you will open the door all the way open, then pull the clips down until they stop and lock in place. Then close the door to the stopping point and lift the door off the range. If you door does not lift off, and it does not have the clips, then you will open the door all the way open. You will see a hole in the hinge at the bottom of the door. You will insert a pin or nail into that hole and close the door to the stopping point. Then you can lift the door off the unit. Once the door is removed, you will lay it on a soft surface and disassemble the door. Pay attention and make notes if needed for reassembly of the oven door. Read More...
David January 04, 2013 for Model Number FEFL67DCE MY RANGE HAS BLACK DOOR/DRAWER HANDLES PART# 316270200. I WOULD LIKE TO CHANGE THEM TO STAINLESS STEEL HANDLES, PART# 316246100. QUESTION IS, WILL IT WORK? THANK YOU
1 Answer Hello David, In looking at your model series all I could find was stainless models with black handles. I can only confirm that the black handle 5304537685 fits your model. As for the stainless handle, you could try and see. We have a 365 day return policy. Thanks and good luck! Read More...
Alex October 10, 2012 for Model Number CFEF372CS1 My door handle for the stove popped off. Is there any information on how to get inside the door to repair it? Thank-you
1 Answer Hello Alex. You will need to determine how to remove the door on the model number you are working on. If you open the door to the first stopping point, some oven doors will lift off the unit in this position. On other models, you will see clips on the back of the hinge toward the opening where the hinge enters the range. If yours is like this, you will open the door all the way open, then pull the clips down until they stop and lock in place. Then close the door to the stopping point and lift the door off the range. If you door does not lift off, and it does not have the clips, then you will open the door all the way open. You will see a hole in the hinge at the bottom of the door. You will insert a pin or nail into that hole and close the door to the stopping point. Then you can lift the door off the unit. Once the door is removed, you will lay it on a soft surface and disassemble the door. Pay attention and make notes if needed for reassembly of the oven door. Read More...
1 Answer Droaten, the handle in white is part number 316270201. You will need to order the replacement screws, part number 5304416408 to grip into the plastic of the new handle. Thanks! Read More...