James Lackey July 07, 2020 for Model Number FGGS3045KFE I have the FGGS3045KFE Frigidaire has range that is currently set up for LP. Would you please tell me what orfices I would need to convert back to natural gas? Thank you!
1 Answer James L, Based on the information provided the orifices for Nat.Gas is surface units 316527504 Orifice, burner, 5K 316527500 Orifice, top burner, 9.5K 316527502 Orifice, top burner, 12K 316527509 Orifice, burner, 18.2K and the broil 316409703 the bake is adjustable and don't forget to flip the cap on the regulator. Read More...
Greg February 11, 2020 for Model Number 790.72402013 I am attempting to convert back our oven from lp to natural gas. Do I only need the 4 orifices ap438688, ap4368630, and ap4362676 (2)? I assume I do not need one for the oven as it is adjustable. Thanks
1 Answer Hello Greg, You are correct but do not forget to adjust the air shutters. When adjusting back to natural gas these will need to be adjusted to about 3/4 of the way closed. Read More...
Jamie December 09, 2019 for Model Number 790.72403012 I need the conversion kit from Natural gas to LP, can someone suggest the part numbers?
Gary November 26, 2019 for Model Number LFGF3014LWC Need to change from LP to natural gas. What orifice spuds to I need for the top and what about the oven orifice and regulator?
1 Answer Gary, the left front, left rear, and right rear orifices are part number 316527500 while the front right orifice is part number 316527502. With the gas valve shut off at the wall, and the power cord unplugged, the regulator cap can be unscrewed and flipped upside down, the air shutter can be closed to the 3/4 position, and the bake orifice hood can be loosened 1 1/2 to 2 full rotations. With this done, the flames should be blue, if there is any yellow, adjustments to the air shutter and orifice hood can be made in small amounts. Read More...
Chris June 07, 2019 for Model Number LGGF3043KFR I need to convert this stove from LP back to natural gas what orfices do I need for the top burners, oven, & broiler? Also does the gas valve need any additional modifications, such as new spring?
1 Answer Chris, the orifices are as follows: right front orifice 316527509, right rear orifice 316527504, left rear orifice 316527511, left front orifice 316527500, and center orifice 316527500. With power disconnected and gas turned off to the unit, you will need to change out these orifices then loosen the orifice hoods of the bake and broil burner 2 1/2 turns, as well as unscrewing the regulator cap to flip the gas regulating pin upside down from it's current position. Read More...
Darin April 02, 2019 for Model Number Frigidaire FPGF3081KFP I am converting this back from LP to Natural Gas. The front right they call the Power Burner 17,000 BTU which takes 3 separate orifices. Can you please tell me the correct orifices to get by the part numbers for both sides and the middle.THANK YOU!
1 Answer Darin, The Natural Gas orifices for the right front "PowerPlus" burner are ; 316527502 / 316527502 Orifice, burner, 12K "middle) and 316527500 / 316527500 Orifice, burner, 9.5K (2 required) "both side" orifices(total of 3 orifices). The parts are in stock and available at this time. Thanks, Read More...
Rick December 18, 2018 for Model Number RC30DG60PS Hello, what orifices do I need to convert model RC30DG60PS to LP. Thank you
1 Answer Rick, For the model number you supplied you would need to order part number 5304486443 / 5304486443 LP Conversion Kit, w/instructions. Unfortunately the part is presently out of stock and would need to be ordered from the manufacturer. This will add a few days to the delivery time, once you place the order. Thanks, Read More...
Racer B December 04, 2018 for Model Number NF40703929 I need to convert a Frigidaire 4 burner cooktop from Nat Gas to Propane and wanted to know the part numbers for the Propane orifices if possible ..Thanks Parts order tag on cooktop states FGC3X4XAD-A
1 Answer Racer, The part number for the LP conversion kit on your unit will be 5303302413. Read More...
Alissa August 09, 2018 for Model Number FGF348KSH I need to convert from LP back to natural gas. Frigidaire range model FGF348KSH. Which natural gas orifices do I need?
1 Answer Alissa, To convert back to natural gas you will need the top burner orifices right front 316527511, right rear 316527504 and for the center left front and left rear will be part number 316527500. For the oven you would loosen the orifices 1 1/2 to 2 turns and close the air shutters to about 3/4 of the way open. Read More...
Debbie July 02, 2018 for Model Number FFGF3013LWD Need to convert stove back to natural gas. Which orifice do I need to purchase, and what instructions are available to adjust inside the oven?
1 Answer Hello Debbie, the right front burner uses orifice part number 316527502 and the other three burners use part number 316527500. You'll have to turn the orifice on the gas valve counter clock wise 2 1/2 turns and flip the conversion cap on the regulator to N for use on natural gas. Thanks! Read More...