Todd November 30, 2015 for Model Number KGRS505XSS02 I need to convert this unit from LP back to natural gas. Can you give me the specific part numbers I will need to order? Thank you
1 Answer Hello Todd, You will need two WPW10407680 for the LR and RR, one WPW10407678 for the LF, one W10861630 for the RF, and one WPW10319347 for the center. You will also need the fitting W10292293 for the broil burner. The bake compartment will need one W10342661 for the lower oven an W10342662 for the upper. Don't forget to remove and flip the brass nut under the plastic cap on the regulator WPW10518493. Read More...
Joe November 13, 2015 for Model Number 79032353000 I will need a conversion kit from natural gas to LP. What orifices do I need to order? Thanks for your help
Vava August 12, 2015 for Model Number EW36GC55GS2 Like many others I want to convert from LP to natural gas. Which parts do I need to order? Thank you. Vava
1 Answer Hello Vava. You will need to order 316540800, 316540700 x2, 316543204, and 316525103 for the natural gas orifices. Read More...
Elaine August 12, 2015 for Model Number frigidaire gas convection range FGGF3035RF I will need a conversion kit (from natural gas to propane) I want to be certain that AP5608114 will be the correct kit to purchase. Also what kit is needed (if any) to convert the oven? thanks for your help
1 Answer Hello Elaine. The model number will have to be verified on the units I.D. tag since the one listed came up invalid. This will be necessary to look up and specific parts such as the one you requested. Thank you for your patience and understanding in this matter. We will need your model number to help you with this. Please call 1-877-477-7278 or post your model number with a new question on the parts page. Here is a link to help you locate it. http://www.appliancepartspros.com/modelnumber_locator.aspx Read More...
Brad June 19, 2015 for Model Number FGF348KSK Need to convert back to natural gas and need to know if you can tell me what orifices I will need . Thanks again , Brad
1 Answer Brad, The orifices that you would need to convert your unit back from LP to natural are left front, left rear and Center are part number 316527500, right rear 316527504 and right front 316527511. For the bake and broil you will loosen the orifice 1 1/2 to 2 turns and close the air shutter on the burner to about a 1/4 way open. Also flip the cap on the regulator from LP to Natural. Read More...
Brad June 19, 2015 for Model Number fgf248ksk I have a Fridgidaire range need to convert back to natural gas from lp can you tell me what orifices I would need. Thanks Brad
1 Answer Hello Brad. The model number provided fgf248ksk is not a good model number. We will need your model number to help you with this. Please call 1-877-477-7278 or post your model number with a new question on the parts page. Here is a link to help you locate it. http://www.appliancepartspros.com/modelnumber_locator.aspx Read More...
John April 24, 2015 for Model Number GE model # JGB250DET2WW I need to convert this from LP to Natural Gas. What orifices do I need? Thanks
1 Answer Hello John, You will need to order two WB28K10023 for the left front and left rear. You will also need one WB28K10032 and one WB28K10031. The bake and broil are adjustable so no parts will be needed for the conversion of the bake compartment. Read More...
Walt February 16, 2015 for Model Number FGF328GSG I would like to switch from Propane to natural gas, what orifices do I need to order? Thanks, Walt
1 Answer Walt, you'll need one 12k burner orifice part number 316527502 and three 9.5k burner orifices part number 316527500. Flip the regulator back to NG and adjust the oven orifices. Thanks. Read More...
Jerry J. December 05, 2014 for Model Number FFGF3053LSJ Have purchased a new Gas Range and need part numbers for this conversion to convert from Natural Gas to LP. Your help is appreciated. Thank you.
Keith B October 16, 2014 for Model Number 79072903012 I am converting this range from LP to Natural gas and need to replace the orifices. Can you tell what part numbers and quantities I need. Thanks
1 Answer Keith, You will need the following orifices for the conversion back to natural gas on your unit. These will be for only the top as the bake and broil you will need to loosen the orifice 1 1/2 turns and close the air shutter to about 1/4 way open. Some minor adjustments may need to be made. The Regulator you will flip the pin under the cap from LP to Nat. The orifices required are right front 316527509, Right rear 316527504, Center and left front 316527500, and left rear 316527502. You need 1 each for each burner. Read More...