Tom G. March 23, 2017 for Model Number FFGF3011LWC Need to switch stove back to natural gas from propane, need 4 top burner orifices, but can only find the entire valve assembly or LP conversion kits
1 Answer Hello Tom, You will need to order four 316470400 orifice spuds for the model provided. The regulator and bake/broil burners will also have to be converted by adjustment. Read More...
1 Answer Jeff, To change this unit back to Natural gas you will need the following orifices. Right front 316237901, and right rear left front and left rear 316237902. For the oven you will need to loosen the orifice 1 1/2 to 2 turns and close the air shutter to about 3/4 of the way open and then flip the cap on the regulator. Read More...
Marlene March 01, 2017 for Model Number FFGF3047LST I need to convert my stove to Propane Gas. Will part # AP4374168 be compatible?
Norman December 14, 2016 for Model Number FFGF3047LSH I need to convert this back to natural gas. Could you assist me with the proper item numbers or kit to covert this back. Thanks
1 Answer Hello Norman, You will need to order 316536600 for the Left Rear, 316536608 for the right front, 316536610 for the right rear, and 316536602 for the left front. You will also need to flip the large "nut" on the regulator. The burner hoods in the bake compartment at the base of the burners will need to be turned counterclockwise 1 1/2 to 2 turns and the yellow tipping adjusted out with the air shutters. Read More...
Robert October 28, 2016 for Model Number ew36gc55gs2 I want to switch back to bottle gas. What orfice kit do I need
S Smith June 29, 2016 for Model Number FGF358CGSD Hello. I need to convert my stove back to natural gas from LP. However, I've misplaced my original parts. What parts do I need to order to do the conversion? Thank you.
1 Answer S. Smith, You would need 4 orifices part number 5303210090. For the oven you would loosen the orifices 1 1/2 to 2 turns. and close the air shutters to about 1/4 way open. Flip the regulator cap to NAT from LP. Read More...
Breinn June 28, 2016 for Model Number 79031063100 I need to order the orifice kit for liquid propane for my Kenmore Elite slide in range (790.31063100). I believe it should have 7 spuds.
1 Answer Hello Breinn. You will need to order GRLP4 for the part needed for the gas conversion. Read More...
David June 02, 2016 for Model Number LGGF3043KFR I want to convert back to NG from propane, What orifices will I need?
Ryan March 09, 2016 for Model Number FPGS3085KF A customer of our has a Frigidaire Professional FPGS3085KF. They are going back from LP to NG. I have already ordered 4 orifices from APP.com and need 1 more for the mega burner at 17K BTU. In the manual it says I need 16,250 BTU Twin Marked 2 x 146N Orifice. Can you let me know the last part I need? Thanks! Ive already ordered 316527500 316527504 316527513 316527514
1 Answer Ryan, For the conversion you need 3 of 316527500 for the left front and for 2 orifices on the largest burner, 1 of the 316527504 for right rear,1 of 316527513 for the right rear burner and 1 of 316527514 for the 3rd orifice on the larger burner. The largest burner has 3 orifices which will equate to the btu rating that it calls for. Read More...
Bob February 13, 2016 for Model Number JGB281DER3BB I HAVE A GE RANGE IT IS L/P GAs how do i put back to nat/gas
1 Answer Bob, To convert this unit back to Natural gas you will need to flip the cap on the regulator and change out the orifice holders that have the natural orifices on them. The part numbers needed for this is Right front [WB28K10680], Right rear [WB28K10682], left front [WB28K10683], and left rear [WB28K10681]. For the oven you will need to loosen the orifice on the burner and broil orifices and close the air shutter on the burner down to about 1/4 way open. Read More...