Jeremy June 13, 2025 for Model Number GLGF389GBE I have a Frigidaire stove I need to convert back to natural gas. I need to know orifice sizes.
1 Answer Hello Jeremy, thank you for contacting AppliancePartsPros.com The 5k BTU orifice is 1.07, part # 316237903. This part is discontinued by the manufacturer and is no longer available for purchase. The two 9.5k BTU orifices are 1.46, part # 316237902. The 12k BTU orifice is 1.67, part # 316237901. And the 16k BTU orifice is 1.98, part # 316237912. This part is discontinued by the manufacturer and is no longer available for purchase. Read More...
Al August 11, 2023 for Model Number FFGF3052TSD Is there an orifice kit with all the orifices for all burners to convert it from Lp to Natural gas?
1 Answer Al, Unfortunately, there is not a kit to go back to natural and you have to get each individual orifice. Read More...
Chelsea May 28, 2023 for Model Number ew30df65gsh I need a natural gas to lp conversion kit for this model #ew30df65gsh. Anyone able to help??
1 Answer Hello Chelsea, this model is not listed as being convertible to LP gas, so there is no Conversion kit listed, you can confirm this by checking with the manufacturer's Customer Service site. Read More...
Adolfo April 25, 2023 for Model Number FGGF3031KQM Frigidaire Gallery, model FGGF3031KQM. Needs to be converted back to Natural Gas. Thanks for any pointers regarding orifices and oven settings.
1 Answer Adolfo, the left front 316527500, left rear 316527511, center 316527500, right rear 316527504, and right front 316527509 orifices would need to be changed. The oven orifices would need to be loosened 2 full rotations, the air shutters set to 3/4 open, and the regulator limiter under the cap flipped upside down from its current position when the gas supply valve is turned off. Read More...
Jeff November 17, 2022 for Model Number 790.71409700 i need the parts to convert this kenmore range from lp to natural gas are they available?
1 Answer Jeff, To convert this unit back to natural gas, for the oven loosen the orifices 1 1/2 to 2 turns and have the air shutters about 3/4 of the way open. Flip the brass cap on the regulator from LP back to Natural. For the main top you will need the following orifices: Right front 316237909, Right rear 316237903, Left rear and Left Front 316237902, and for the center front, middle and rear 316237913. Read More...
Holly April 06, 2022 for Model Number Crosley Range/Stove/Oven CRG3490LWE I need to change it from LP to natural gas. What parts do I need?
1 Answer Holly, To convert back to Natural gas you will need the top burner orifices Right front 316527508, right rear 316527504, center and left front 316527500, and left rear 316527502. For the oven, you will loosen the orifices 1 1/2 to 2 turns and make sure that the air shutters on the burner are about 3/4 of the way open. On the regulator will be a brass cap that will need to be flipped from LP back to Natural. Read More...
Blake Donnell June 18, 2021 for Model Number Kenmore #790.74423810 Nat. Gas Range Customer needs to convert natural gas range to LP (Elevation 3,600 feet). Can you supply orifice numbers?
Christopher September 06, 2020 for Model Number Kenmore 790.78012000 I need to conversion kit to change our range from LPG to Natural gas.It's a Kenmore made by Frigidaire the model is 790.78012000. Again we are looking to convert it from LPG to Natural gas!
1 Answer Christopher, the right front orifice 316527509, right rear orifice 316527504, left front orifice 316527502, and left rear orifice 316527500 for this model would be needed. With the gas supply turned off and the power cord unplugged, the cooktop orifices can be changed out. The bake and broil orifice hoods would need to be loosened by 2 1/2 full rotations and the regulator would need to be adjusted by removing the regulator cap and flipping the stem inside to where it is upside down. Read More...
Bill January 19, 2020 for Model Number JDS885OBDS I have a Jenn Air gas stove and need to replace the X-Large gas orifice. Is there a chart for replacement for the different burners? The X-Large burner clicks until you blow on it. Most igniters seem to go form one side to another. The X-Large stays on one side so I was planning on replacing everything including the orifice.
1 Answer Bill, The parts needed for the X-Large(right front burner are 74007736 / 74007736 BURNER ASSEMBLY (X-LRG) includes igniter and WP7527P004-60 / 74007766 HOLDER, ORIFICE (15K) Note: HOLDER, ORIFICE (16K-RF) includes orifice(orifice not available as separate part). The parts are in stock and available at this time. Thanks, Read More...