Ben August 10, 2020 for Model Number feb30t7fca Are these racks sold as a single rack or as a pair? I have a double wall oven and need 4 total replacement racks.
Nancy February 12, 2019 We have a kenmore elite model 79041029800 the racks all down with any weight on them. we are looking for a rack that is 24 1/4 inch by 15 inch rack so things stop falling down. do you have a rack that will work with this model?
1 Answer Nancy, Unfortunately we only have the original racks for this unit and would not be able to advise on a rack that would fit this unit properly. Read More...
Bill November 18, 2016 for Model Number 47783 We have a Kenmore 27 inch Electric Single Wall Oven with a warped liner that causes the middle placed rack to fall when pushed in or pulled out. The Sears repairman informed me today that the liner is unrepairable and advised that I look for a replacement rack that's a bit wider. The existing rack measurements are 20 3/8 inches wide and 14 3/4 inches deep. Is there a replacement rack suitable for our oven that measures 20 1/2 inches wide (or thereabouts) and the same or similar depth? Aside from the liner warping, the oven woks fine and is only 7 years old. It cost us $800 plus so we'd like to get some more life out of it, but my wife is understandably growing tired of the spills caused by this problem.
1 Answer Hello Bill. We can only recommend the manufacturer replacement racks for the unit. I will attach a link to our oven racks. Each square is 1" in size. You may be able to locate something you might think will work for your issue. Thank you. http://www.appliancepartspros.com/range-cooktop-oven-rack-shelf.html Read More...
Ken R February 01, 2015 for Model Number 79048859900 wall oven I have a 30 inch kenmore wall oven. model number 79048859900. The oven racks keep falling down. I measured the rack and its approximate dimensions is 14.5 deep and 24 wide. The width is about 1/4 inch too short. Is this rack the recommended replacement rack, and will it be wide enough so my wife's lasagne doesn't end up on the bottom of the oven any longer? LOL I appreciate your time in answering. If there is another rack that might fit better, I'd appreciate any and all input. Thanks! Ken
1 Answer Ken, The oven rack for your unit is part number 318262516. This appears to be the same dimensions at the ones you currently have. You will want to check the oven liner for being warped. Read More...
Jackie B. November 14, 2013 for Model Number PLCS389ECB The oven racks for this model are too small. They measure 24 inches but the interior of the oven is about 1/4 to 1/2 inch wider. The racks fall and I can only use the bottom rack which isn't very stable. Is there a larger rack I can use? I don't know if these are even the right ones for the range.
1 Answer Hello Jackie, The racks listed for this unit are 318262516. They measure about 24 1/4 inches wide. Read More...
Brian June 20, 2013 for Model Number kenmore 790.47893604 My oven door will not stay closed all the way (about 1/2" gap). I am guessing that it is the hinges. The top rack has all been burnt up and I would like to replace it. The finish is coming off on the rack. I think the previous owner was a little rough on the oven. We just bought the house. What are the part numbers? I want to verify to make sure I was selecting the right ones.
1 Answer Brian, The rack for the oven is part number 318262516 and the hinges are part number 318024747 and works for both sides. Read More...
Daryle March 15, 2013 Oven racks for Kenmore your part # 318345207 What are the measurements of the rack?
1 Answer Steven, using the picture we have available of the rack 318262516 is approx. 24" x 15". Thanks! Read More...
Susan C. April 13, 2011 for Model Number Kenmore Electric Range Looking for oven racks for the Kenmore electric range we have in a rental unit. The inside measurements of the oven are 22.5-23" by 17.5-18" I found part number AP3951027 which is the part for many Kenmore electric ranges. However, I could not find measurements of the racks. I could not find a model number/serial number tag on the inside of the unit or around the doors. I'm assuming the tag may be on the rear and moving the range out may be difficult for tenant. Thank you for your assistance. Susan
1 Answer Hello Susan! The rack 318262516 is approx 24" X 15". It seems this may be a little too wide. We will need the model number to verify the proper rack part number. Here is our model number location tool for all possible locations. Also, try looking in the bottom drawer on the sides or inside on the corners of the drawer. Hope this helps! http://www.appliancepartspros.com/modelnumber_locator.aspx Read More...