Robert February 16, 2021 A while back I bought a control panel from you guys for my Fridgedaire dishwasher after I got water on the control panel. I've done the same thing again and the panel does not light up at all. It is part #154639208, I ordered it on 11/09/2018, my order number was 9483007-8426876. My reference # was 78435081. I looked on your website and it shows no longer available, can I get some sort of replacement ? Thanks, Bob Kovalak
1 Answer Hello Robert, once a manufacturer discontinues a part, and it goes out of stock, it is considered no longer available, there is no replacement part. Read More...
Doug L March 29, 2017 for Model Number FPHD2491KF0 The dishwasher had a PF showing. Started the dishwasher and it stopped mid cycle and then had no power. Found that the power plug was loose. Plugged it back in.Now the lights on the control panel aren't working and the control panel will not stop or cancel a wash. is it the control panel that is bad?
1 Answer Doug, With getting the PF and the lights will not come on and unit will not stop running then this sounds like it would most likely be a faulty control board. Read More...
Kathleen O May 12, 2016 for Model Number FDB4315LFC0 We have a frigidaire dishwasher on which only some of the the touchpad buttons are working (four buttons on left not operating at all). Other buttons work and operate the dishwasher appropriately. Would replacing control panel likely fix this?
1 Answer Hello Kathleen. Yes, it sounds like the control panel is bad and will need to be replaced on the unit. Read More...
Jason October 26, 2015 for Model Number FDB4315LFC3 Hello, I have a frigidaire dishwasher model FDB4315FLC3. A few weeks ago we had a power surge and the PF code flashed on the display. After the rest of the code the dishwasher will not start. I can press the buttons on the touchpad and every bottom will work except the high temp and sanitation. Could this be the control board or the touchpad? Everything was working before the power surge. Thank you Jason
1 Answer Hello Jason. Try reseating the ribbon cable. If the issue continues, replace the control panel. If it continues after that replace the board. Power surges can damage many electrical parts. Read More...
Clayton July 14, 2015 for Model Number FDB4315LFC0 Dishwasher won't do anything. Has Er lit up on the panel, Washing/Drying lit up on the left, Clean and S lit up on the right, low indicator on the Rinse button is also lit up. From your other reviews it looks like I might need the SS Console Asmy 154639208. Can you confirm? Thanks!
1 Answer Clayton, Based on the error that you are having, this would indeed be caused by a touch pad assembly error and will need to replace the console assembly 154639208. Read More...
Rick June 26, 2015 for Model Number PLD4555RFC0 I have a frigadaire dishwasher PLD4555rfco that flashed "ER" code. I want to replace the key pade and control assy - can you tell me which part number to order?
1 Answer Rick, The control panel that you would need for your dishwasher would be 5304504659. Read More...
Stephen June 07, 2015 for Model Number FDB4315LFC2 I have a Frigidaire FDB4315LFC2 dishwasher. It was flashing the "CL" code, so I replaced the latch assembly. When this did not correct the problem, I replaced the control board. Now the dishwasher turns on when I press the Start button on the right, and I can change what type of wash I want with the buttons on the left, but the four center buttons that control High Temp Wash, Sanitize, Air Dry, and Delayed Start won't work. Could this be a faulty control board, or is it something else??
1 Answer Stephen, With the 4 buttons not working, make sure that there is no corrosion on the terminals of the ribbon harness and make sure that the ribbon harness is firmly in place. If this checks ok then the most likely cause would be a defective control panel. Read More...
Deb G. May 05, 2015 for Model Number FPHD2481KF1 Just moved to a house, Fridgidaire professional dishwasher in kitchen. Haven't used this brand before. Touch pad seems less sensitive than it should be, have to work at it to make a selection. Any thoughts? Thank you!
Mike February 04, 2014 for Model Number fdb4315lfc2 Dishwasher will not come on. No readout on the display and the buttons don't seem to do anything. Tried resetting by switching power off. That didn't work either. Wondering if I just need the new control board?
1 Answer Hello Mike. Yes, it sounds like the control board is bad and will need to be replaced on the unit. If there is power coming to the board, and it does not work, you will need to replace the control board. You can test this with a multi-meter TJMA-DMT3. Here is a link on how to use a multi-meter. http://forum.appliancepartspros.com/oven-repair-including-ranges-cooktops/4810-how-check-continuity-ohmmeter.html Read More...
Louie U January 05, 2014 for Model Number FDB4315LFC3 Have an ER code flashing along with other control panels buttons flashing as well. Reset breaker hoping unit would reset. No go! What part needs to be replaced so I can order soon?
1 Answer Hello Louie. We will need to know the error code to tell you which part is bad on the unit. Thanks Read More...