Betty February 17, 2014 for Model Number GLHS38EGSB4 I have a Frigidaire side by side refrigerator and it was working then one day both sides stopped getting cold......I do know know if it is the starter or the compressor...
1 Answer Betty, You will want to pull the start relay and tap the relay on your hand. If small particles come out then the start relay will need to be replaced. Read More...
Ed October 31, 2013 for Model Number glhs68ejbo Theres water coming out of the water dispenser when pressed but the water doesnt fill up the ice cube tray to make ice ?
1 Answer Hello Ed. Make sure the freezer is between 0° and 5°. You need to check and see if there is power going to the water valve when the icemaker cycles. If so, replace the water valve on the unit. If not, or the icemaker does not cycle, you will need to replace the icemaker on the unit. Also, check and make sure the fill tube on the unit is not frozen and clogged. If so, replace the water valve and thaw out the fill tube. You can test this with a multi-meter TJMA-DMT3. Here is a link on how to use a multi-meter. http://forum.appliancepartspros.com/oven-repair-including-ranges-cooktops/4810-how-check-continuity-ohmmeter.html Read More...
Kug June 08, 2012 for Model Number Kenmore 253.57392602 The compressor on my refrigerator is not working. The capacitor is good. How can I check the starter?
1 Answer Hello Kug, A bad start relay will rattle. Unplug the unit and remove the relay from the compressor. There's no need to disconnect the wires. Shake the relay. If it rattles, order a 241707701. Read More...