Susan C. January 14, 2016 for Model Number MFC2061KES I bought a house with this model, the whole bottom bin is open, I believe there should be a cover over it. What would be the part number, how can I tell if the side parts are ok or broken?
1 Answer Susan, Yes there is a "cover over it". The Pantry Drawer Door part no. is W10827015 / W10827015 for the model number you supploed, as long as the "side parts" are mounted to the side walls, aren't cracked or dented, dinged they are OK. There should be a "lever or knob on the right side, it controls the air damper in the back of the bin, make sure it moves and you may hear the damper door in back move. The pantry door has two pivot tabs, one on each side, you need to be careful when you insert the tabs into the mounting hole in the side bracket, you don't want to snap off the tab(s) there is a protrusion on the left side of the bin upper edge that will raise and lower the drawer door as you open and close it. Read More...
Mr Honeydew November 21, 2012 for Model Number pfss6pkwbss How do I install Flip Pantry Cover? AP4343878 GEWXR32X10666. Flip has fixed pivot at each end. On the fridge looks like a removable block and ?
1 Answer Remove lower door shelves and rollout Removed 3 screws from both side panels.slipped right nub of new flip into pivot hole and then raise left front of side panel letting right side follow making sure tabs on side panels stay in slots and also rear corners of pantry shelf remain under lips of side panel top edges. Raise high enough to put left nub in,rotate flip so center hinge points engage. reinstall the 6 screws and then drawer and door shelves Read More...